Question about Washing Machines
OK, e03 is a draining fault.
If the machine is actually draining ok and quickly it would suggest a restriction in the pressure chamber or a faulty pressure switch.
Unplug the appliance.
Take the rear panel off.
Take the large plastic tube out of the sump hose (pressure chamber).
Clean it out and clean the hose out.
Reassemble and try the machine again.
Posted on Oct 28, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 13, 2017 | Whirlpool Washing Machines
Feb 07, 2015 | Kenmore Elite Oasis 27052 Top Load Washer
Hello agusta_bjarn - Are you certain the error code is C03? Could it possibly be E03? If so, typically error code E03 indicates that there is a failure with either the wash motor or motor hall sensor. I suggest checking for suds in the tub and siphoning. A further diagnoses is recommended to have a professional check the wiring between motor and main control board since either part could need replacing.
Apr 12, 2013 | Electrolux 24 in. EDW5505EPS Stainless...
Dec 31, 2010 | Washing Machines
Aug 10, 2008 | Washing Machines
615 people viewed this question
Usually answered in minutes!