Question about Singer Sewing Machines
Posted by Anonymous on
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: raising bobbin thread
These machines are timed by belt and go out of time a lot. Check and see that when the needle passes through the plate and travels upward 1/8" at this point the rotating hook should be right behind and above the eye in the needle,my guess is that it is out probably 1 tooth on the timing belt and can usually be corrected by removing the bobbin case and holding the rotating hookk with on ehand and forcing the handwheel with the other hand which will cause the belt to jump a cog and should put your machine back in time I hope this helps
Posted on Jan 10, 2009
Try this page for Threading and Bobbin Winding Diagrams for loads of machines.....even if your model is not specified, there's a good chance you will be able to work it out from similar machines.
Best Wishes Martyn
Bargain Box in Australia
Posted on Sep 10, 2009
Testimonial: "You are awesome... it didn't have the exact model but I found one close and figured it out. Thank you so much!"
Posted on Jan 23, 2010
I had a Golden Touch 'N Sew many years ago and as the machine aged and parts became worn, step 4 of this bobbin winding diagram started to become a problem and I had to sometimes try several times before the "tabs" would release. If they did not release, the machine "thought" it was still winding the bobbin and would not sew.
Posted on Mar 06, 2010
Tips for a great answer:
Dec 27, 2016 | Singer Sewing Machines
Dec 12, 2016 | Singer Sewing Machines
Jan 13, 2015 | Singer Sewing Machines
Sep 10, 2012 | Singer Sewing Machines
Dec 13, 2010 | Singer Sewing Machines
Mar 12, 2010 | Singer 5050 Mechanical Sewing Machine
Jan 22, 2010 | Singer 3116 Simple
Jun 13, 2009 | Singer Sewing Machines
29 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: