Question about Hotpoint  Standard Range Hood

1 Answer

Hotpoint Aquarius WF440 stopping during cycle

Hi washer stops during cycle. Power light is flashing quickly, reduce creases light and time saver light flashing more slowly. Please help?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Posted on Sep 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When open door trips breaker sometimes


has the cooking cycle stopped when you open the door
in these breaker trips
if no
stop the microwave before opening the door every time

if yes ..it has stopped
faulty microwave ...
you could try to replace door release catch
but think there is more to the breaker trip with the unit
time to toss it out and replace it

Jun 02, 2016 | Kenmore 1.7 Cu. Ft. Over The Range...

1 Answer

Ge zv850 vent hood


was this a d.i.y. project, if so was a proper ground ran from breaker usually a size bigger than the power. when the fan goes out does the light do the same, as u may have crossed your device wires. electrical can be tricky because there can be several reasons for your issue. u suggest u double check your work ensuring everything is

Feb 17, 2014 | Kitchen Ranges

1 Answer

Smeg KSE1V950X fan lights flash? Is this a filter cleaning issue and how do I reset it?


Yes this is a sign to clean the filters. Once they have been cleaned, it can be reset by pushing 2 buttons together at the same time - I just tried several combinations until they stopped flashing.

Sep 05, 2011 | Smeg KS9XSE Stainless Steel Kitchen Hood

1 Answer

Tradewind range hood- model PSL736: both lights out, fan works


The screws by the lights probably only hold the fixture in place. If you took the screws out you would only get access to the fixture and maybe some wiring. If you have already replaced the lights you can assume its not the fixtures. Not likely both fixtures failed at the same time. The common problems would be the light switch. You would need to gain access to the switch and then check that for power.

You already know house power is good because the fan is working, But since both lights failed and new bulbs don't fix the problem it would most likely be a switch.

According to their website it looks like that whole front panel should come off including the fixtures and the switches.

MAKE SURE THE POWER IS TURNED OFF......REMEMBER THE FAN WON'T WORK IF THE POWER IS OFF.

Once you remove that you can check the wiring harness for the lights. You may also see wire nuts on the harness double check those as well.

Jul 05, 2009 | Kenmore 51840 Kitchen Hood

2 Answers

Fan and light does not turn on .


FAN AND LIGHT DOES NOT WORK
my zephyr typhoon stopped working. Neither light not the fan come up. I am sure there is power going into the unit. I turned on the light one day , the light cam on and suddenly went away. From then even the fan stopped working. any information on what happened is appreciated. Thanks

Jan 22, 2009 | Zephyr Typhoon AK2100 Kitchen Hood

1 Answer

Neff extractor fan not working


Hi rags116,

I'm Harvey the Master Plumber.

Your problem is: You have a neff extractor fan which hasstopped working. The light and fan have both stopped working. Do I know where you can find the fuse as you suspect that this may be the problem. If I don't think it is the fuse would I be able to suggest anything else.
The type is D-AY25-8 If there is another number that is more helpful please let you know. thanks Again your Neff Series 2 extractor has stopped working and you want to save yourself buying a new one!! Any suggestions greatly appreciated!

Since both light and fan require low voltage it sounds like a bad transformer. It will be mounted next to the motor. Make sure you turn off the power first.

Feel free contact me again!
Please give me a rating here at fixya.com before you sign off
Thank you,
Harvey your Master Plumber

Sep 24, 2008 | Kitchen Ranges

1 Answer

My range stop working


Hi 7764,

I'm Harvey the Master Plumber.

Your problem is: You have monogram (df 8 08989 9) hood it all of a sudden stop working , there is power (120v) coming in ' but nothing works

If you have the testing equipment and the ability then check the fuse then the transformer then simply follow the power till you see where it stops. Or yu might try utilizing the Repair Directory to find a repairman.

Feel free contact me again!
Please give me a rating here at fixya.com before you sign off
Thank you,
Harvey your Master Plumber

Sep 11, 2008 | GE ZV850SBSS Kitchen Hood

5 Answers

Fan and light not working where is fuse box?


Hi - I have a neff extractor fan and have the same problem. The light and fan have both stopped working. Does anybody know where I can find the fuse as I suspect that this may be the problem too?

Dec 07, 2007 | Whirlpool GZ7730XGS Stainless Steel...

Not finding what you are looking for?
Hotpoint  Standard Range Hood Logo

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Ismael Rodriguez...

Level 2 Expert

162 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Hotpoint Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...