Question about Hampton Bay Dryers
Replacement remote for ul model no:44-mdl
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had the same problem. Instruction manual is awful. Doesn't mention anything about how to fit the huge yellow receiver either into (a) the mounting bracket or in (the canopy.
After numerous meltdowns, I finally figured it out. Instead of running the live wires through the center of the mounting bracket, run them on the side. The mount bracket to ceiling. If you try to run them through center, you will probably run out of room, and the Receiver will not fit. Once mounted, drop the pin into the mount and turn it until it locks into position.
Next, slide the Receiver in the tight space at top the pin, and just below top of mounting bracket. It will *barely* fit. Then connect all your wires with the wire nuts. Wrap in electrical tape just to be extra careful.
I could *not* get my wires to push up into the ceiling box because the Receiver was blocking the entrance. So I tucked them on the sides, and then lifted the canopy up and finished the installation. All the wires were hidden inside the canopy.
Hope that helps. And hope you haven't lost your mind yet.
God forbid they explain how to instal the receiver, or include a battery.
Hampton Bay = Idiots.
Posted on May 13, 2011
Tips for a great answer:
Jul 30, 2017 | Miscellaneous
Apr 03, 2017 | Hampton Bay Dryers
Aug 25, 2011 | Hampton Bay Heating & Cooling
May 06, 2010 | Dryers
Apr 27, 2010 | Dryers
Jan 07, 2009 | Universal Remote Control Hampton Bay...
67 people viewed this question
Usually answered in minutes!