Question about Canon PIXMA MX850 Multifunction Printer

Open Question

Scanner lock switch canon mx850

Where is the scanner lock switch

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
mariolands
  • 2296 Answers

SOURCE: Where is the scanner lock switch on the mx850

You need to lift the document cover, and you should see a small gray slide type switch on the top of the printer's scanner, near the front left corner of the glass. Slide the switch to the unlock position, close the document cover, then turn off the machine. Wait 5 seconds, then turn the machine back on. This should restore the scanner function.

Posted on Dec 19, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Scanner lock switch


Somewhere on the machine there is a lever that locks the scanner assembly in place for when it's transported. You need to look around all sides or under the top (when you raise it) you might find it along side of the glass.

Good luck!

Sep 22, 2012 | Canon PIXMA MX850 Multifunction Printer

1 Answer

Where is the scanner lock switch on the mx850


You need to lift the document cover, and you should see a small gray slide type switch on the top of the printer's scanner, near the front left corner of the glass. Slide the switch to the unlock position, close the document cover, then turn off the machine. Wait 5 seconds, then turn the machine back on. This should restore the scanner function.

Dec 19, 2010 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

Canon Pixma MX850 won't scan - says 'set the pc to start scan'


Do you have more than one PC connected to the scanner? I have both a PC and a Mac connected to it, and I think my scanner is trying to connect to the Mac, which requires image capture software to be installed, rather than the PC. Don't know how to tell it to go to the PC, though...

Feb 01, 2010 | Canon PIXMA MX850 Multifunction Printer

1 Answer

Blank pages from Canon MX850 scanner


Try Removing the printhead of your printer and putit back, and do the clean nozzles and printhead alignment.

Oct 02, 2009 | Canon PIXMA MX850 Multifunction Printer

1 Answer

Canon MX850 - paper feed


Look carefully because it is a cassette on the bottom of your canon mx850... so the solution is: or you fill that cassette or you switch your canon (it is a button for that) to take the paper from the top...

Jul 27, 2009 | Canon PIXMA MX850 Multifunction Printer

2 Answers

Service manual Canon Pixma MX850


i need printer adaptar
paramount hotel
koramangala
bangalore
08041222200
9916430394

Jul 21, 2009 | Canon PIXMA MX850 Multifunction Printer

1 Answer

Scanner stopped functioning


r u already try reinstall your driver?if not, try it 1st and see the result..i'm afraid the driver is damages....try to download from canon support website in order to get the updated one...hopes it will help ; )

May 26, 2009 | Canon PIXMA MX850 multifunction InkJet...

1 Answer

Canon MX850 printer - ADF copy has black line on it


Hello, my name is Steve,.
This is a common problem and an easy fix.
If you lift the ADF / top cover assembly up, you will see a small narrow piece of glass next to the flat-bed glass.

Ths is called a "Slit-glass". The only purpose is to read content from that point by the scanner, The Scanner will sit in the underside of it.

It is dirty. Wipe this with glass cleaner and a soft lint-free cloth. you may need to do this several times. Concentrate the part of the glass were this image problem is just by the orientation of the document you are installing with the direction of the document you are passing through the ADF.

It will take several attempts, but with each try, make a new test from the original document, unyil the problem disappears.

I believe this will solve your problem, Best , Steve

Mar 10, 2009 | Canon PIXMA MX850 multifunction InkJet...

Not finding what you are looking for?
Canon PIXMA MX850 Multifunction Printer Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1992 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...