Question about Whirlpool Kitchen Ranges
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
1. Verify error code by pressing and holding CANCEL/OFF key for 5 seconds.
Momentarily (less than 5 sec.) press CANCEL key again to remove error code
2. Press and hold any key for 1 minute until F2 E0 code is displayed.
3. Cancel F2 E0 error code.
4. Program and start the clean mode. Observe to see if door locks. If it does not,
inspect the locking mechanism from the solenoid to the latch pawl and door to
find the cause of the problem. If the door is not locking, then 1 minute from the
start of clean, the F5 E1 code will again be displayed. Steps 1 through 3 will
have to be repeated before another clean can be started.
5. Once any mechanical problems with the latch mechanism have been corrected,
program and start a clean cycle (after, if necessary, clearing F5 E1 error code)
to ensure proper operation of the door lock. Immediately cancel the clean mode to observe proper operation of door unlock
Posted on Feb 12, 2008
SOURCE: Unlocking Oven controls
According to the manufacturer's website you should only need to Press and hold the "Lock" key for 5 seconds. A single tone will sound and the "Loc" will disappear off the display.
This is the link to Whilpool's website and to the manual.
Go Ahead. Use Us.
Posted on Apr 07, 2008
SOURCE: Whirlpool model WBP36800 range.
souds as if a monitor switch has gone bad on your self clean latch mechanism.its continuing to lock and unlock door because the switch that tells the control that the dorr is unlkocked has gone bad and as a result continues to rotate constantly
Posted on May 09, 2008
SOURCE: self cleaning oven instructions
you can google it or just push the clean button and it will most likely default to 3 hours and all you have to do is push start and after it is done wipe out the ashes with warm soapy water DO NOT USE OVEN CLEANER as this will destroy the finish of the self clean cavity
Posted on Nov 12, 2008
Tips for a great answer:
Dec 31, 2014 | Whirlpool 30" Self-Cleaning Freestanding...
Oct 12, 2014 | Whirlpool 30" Self-Cleaning Freestanding...
Before you go working too hard to get
you oven to go into the self clean mode(self destruct)....check out
Self Cleaning Oven Problem
" Wish I had read this first. I never would have used the self cleaning option. Thanks for the info!!
Dec 13, 2010 | Whirlpool Accubake SF362LXTS Kitchen Range
Jun 19, 2010 | Whirlpool Accubake RF362LXTS Electric...
Feb 22, 2010 | Whirlpool RF378 Electric Kitchen Range
Oct 28, 2009 | Kitchen Ranges
Aug 08, 2009 | Whirlpool 30" Self-Cleaning Freestanding...
Dec 13, 2008 | Whirlpool RF364 Electric Kitchen Range
Dec 07, 2008 | Whirlpool GR465LXLS Electric Kitchen Range
215 people viewed this question
Usually answered in minutes!