Printer will not print at all pages are blank

mayby cardridges are empty

MAKE SURE THAT ALONG WITH THE SOFTWARE YOU INSTALL THE PROPER DRIVERS

Have you checked the print que
Printer problems can be a real hassle.
From time to time, due to document layout or settings on your computer, in your software of choice, or even on your printer, a blank page may get "printed" with the rest of your document.
Fortunately, this issue is a simple one to troubleshoot.
Click "Print Preview" when you are finished with your document and ready to print.
Observe your document.
If you see an extra, blank page, you have created a second page.
To delete the second page, close Print Preview, go back into the document and eliminate any blank lines in your documents that you may not need.
You may also find an inadvertent page break at the end of your document.
Place your cursor on its symbol and delete it.
Locate the symbol by clicking on the Show Formatting paragraph icon in the toolbar.


Circumvent this "ghost page" if you do not see a second (or additional) blank page in Print Preview.

Specify the number of pages you wish to print, within the Print dialogue box.
This is typically done by selecting the "Print From" option, then entering the page numbers desired.
If your document happens to be ten pages (without, of course, that final blank page), then enter in the "Print From" field the numbers "1-10".
This will print only pages 1 through 10, without an eleventh (blank) page.

Does it print at all? Have you tried a demo print? menu->information->print demo

Is it printing additional blank pages are all pages blank?

The first thing to check would be the toner.

Try printing out the supply status page (menu->information->print suppies status).

You could also try diagnostics-> PQ troubleshoot.



John

hi,check your printing setting and then print.
or....
uninstall the printer then install the printer again then printer has default setting and print the paper.
sometimes printer current pages print wich is selected by setting.you must select all the pages.
to change the setting,,,
1-open control panel then open printers and faxes then check seeting.

There you go. Good luck!

My HP 1320 printer is printing blank pages and it will not even print test pages etc

When you print from an internet site page and the Kodak box come up on your screen showing that it's printing, do not close this box until you've finished printing or it will print a blank page.

hi,

try this

> unplug the usb cable from the computer
> click on "start--> control panel--> printers and faxes"
> select the printer icon associated with your printer and delete it.
> now plug the usb cable to the printer
> wait for few minutes while all the drivers are installed.

thats it... now try to print... it should be resolved

thanks and regards
agnel

Reduce the amount of paper in the print try.