Question about LG WM-1480FHD Front Load Washer

1 Answer

No lights on panel machine not switching on

I've checked the power to the machine and it all seems fine however when i press the power button on the front panel it doesn't start up.

Posted by on

  • sunilk619 Jan 15, 2009

    I went through and checked the power there was power to the control board. I think the control board was faulty, this costs upwards of $300 to replace...so i got a new machine instead for $450


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 88 Answers

Either the AC filter board has gone out or the main board. The diagnosis is best left to a qualified technician at this point. The technician should start by checking that 110V is coming into the AC filter board from the power cord and that 110V is then leaving out of the AC filter board to the main board. This will determine which part needs to be replaced. Hope this helps. Please rate my solution.

Posted on Jan 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have aquarius+ wf740..... when I switch machine on the wash enhance is flashing and power on/off is solid. Once I click any button the wash enhance stops flashing However the buttons do nothing on off...


Thank you for providing detail in your question and typing in coherent sentences, you are the first person today!

As you have checked basically everything the best option is to get a quote for a fixed price repair. You may well have a faulty control module, these are expensive to replace and require specialist tools to program the replacement.

Aug 03, 2014 | Washing Machines

1 Answer

Cabrio washer won't fill normally but diagnostic shows valves are fine


when doing the diagnostic testing machine fill up almost full and stop display an ol mode

Apr 17, 2013 | Whirlpool WTW6400SW Cabrio Washer

1 Answer

Machine sticks and 'timer saver' flashes. When turned off and onto 'drain' the lights shown on the video flash.


Switch off machine for an hour, press down all the panel buttons to drain any residual voltage to the board. Now when the power is reconnected and the machine is switched on, press down Start/Stop/Pause buttons.
If the fault does not clear, then check for dirt in the inlet and outlet , check flow and drain without water accumulating within. If not the control board is a suspect

Jan 04, 2013 | Washing Machines

1 Answer

Wml520 programme panel is flashing


Remove power for some time, open the panel and check the connectors and contacts. When the power is switched on , press down the start/stop button.If the fault does not clear the suspect can be the controller board.

Jul 03, 2012 | Hotpoint Washing Machines

1 Answer

Kenmore elite HE31 front loader will not start but has power


This seems to be a problem in the start switch diode. If all works fine, but will not push and start and all cycles seem to work when working it manually, this is in the switch timer electronic diode is not working properly. Sometimes a code will not come up, because cycles are still working when manually changing wash cycles. There is seperate switch or electronic trigger that starts the machine, and has probably worn out or not making good contact. If you can unplug machine and then take off panel, trying spraying behind start switch with electronic cleaner to free up any possible dust or dirt. Might get lucky.

Apr 07, 2012 | Kenmore Elite HE5t Washer

1 Answer

My Miele Novotronic W502 does not have any power although it is plugged in


I would check that I do have power present at the outlet. If power is present the next step would be to check the fuse on the push button switch. Unplug the machine and then gain access to the push button switch by pulling the knob off after that you will need to take the orange plastic key from behind the detergent dispenser, and use it to remove the facia panel by pressing down slightly and wedging the key in between to gain access to the electronic. The electronic can be removed by taking out the 2 Torx 20 screws one on each side after that remove the connector plugs from the push button and unseat it from the clip. If you the fuse has continuity it could be a problem with the interference capacitor or the electronic.

Feb 01, 2012 | Miele Washing Machines

1 Answer

How do I use the Child Lock option on Samsung WF-B1456GW?


Hi there,

You can use the child lock feature in 2 ways.

1. To prevent operation of the washing machine when no wash cycle is running

To set this feature, switch the machine on using the POWER button at the top-left of the control-panel. Next, press and hold both the SPIN and RINSE buttons for about 3 seconds - until the child lock light indicator on the control panel illuminates. All functions of the washing machine will now be disabled apart from POWER ON/OFF until such time as the child lock is deactivated.

To deactivate the child lock, press and hold the SPIN and RINSE buttons again until the child lock light indicator on the control panel goes out.

2. To prevent any tiny fingers from tampering with the machine while a program is running.

After pressing the START/PAUSE button to start the wash cycle, press and hold the SPIN and RINSE buttons until the child lock light indicator illuminates. All buttons on the control panel will now be disabled until the child lock has been disabled. When the wash cycle has finished, you will need to switch the child lock off again to reactivate the buttons. Once you have finished using the washer, reactivate the child lock again before switching the power off as above.

The feature can also be used when using the delayed start feature, but needs to be set after pressing the START/PAUSE button.

Hope this helps. Please let me know if I can be of further assistance.

Regards,
BElectric

Feb 09, 2011 | Washing Machines

2 Answers

Samsung washing machine F1245 control panel stuck??


I have Samsung/korea-SW905Washer.When power is switched on the Fault-'1E' appears. what could be the reason.( narrate list of control component failure).
Bought in the year 1996 at India ( voltas mega washer top loading-7.5kg) and working till last month.
after few wash cycles the machine stopped at aforesaid indication and it is not functioning due to above fault indication'1E'
provide me remedial measures or electronic control board circuit.

May 29, 2009 | Samsung WE356A5W Washer/Dryer Laundry...

1 Answer

Lights on Washer Machine flash but Washer doesn't work


Hard Reset - In some cases the control can be non-functioning or may not accept activation from the control panel. To clear and restart the control follow the these steps:

* Unplug or turn the circuit breaker off for 30 seconds.
* Reconnect the unit to the power source by turning the breaker back on or plugging the unit back into the wall outlet.
* Press the Pause/Cancel/Stop button twice to clear the "PF" in the display.
* Start a short cycle to check the operation of the machine by selecting a cycle and pressing and holding the start button until the machine starts.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Mar 31, 2009 | Kenmore Washing Machines

1 Answer

Hotpoint wf220 washing machine


most computer machines will do what your explaining , after the lights have flashed try selecting a prog, and press the start button

Aug 30, 2007 | Washing Machines

Not finding what you are looking for?
LG WM-1480FHD Front Load Washer Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...