Razer chamera no sound - Razer Chimaera 5.1

If your Razer wireless headset is flashing green and not connecting to your Xbox One, there are a few things you can try:

1. Reset the headset: Try resetting the headset by holding down the power button for 15 seconds until the light on the headset turns off. Then, turn the headset back on and try to connect it to your Xbox One again.
2. Check the Xbox One controller: Make sure the Xbox One controller is properly synced with the console and that the batteries in the controller are fully charged.
3. Check the Xbox One settings: Make sure the Xbox One settings are properly configured for wireless headsets. To do this, go to Settings > Display & Sound > Volume > Party Chat Output and make sure "Headset" is selected.
4. Check for interference: Make sure there are no other wireless devices or routers nearby that could be interfering with the headset's signal.
5. Contact Razer support: If none of the above solutions work, contact Razer support for further assistance. They may be able to provide additional troubleshooting steps or help you with a replacement if necessary.

your keyboard utilizes keys F1-F10 as re-programmable function keys.to change your current pofile press the razer lycosa logo+functon key(f1-f10) or you can reset your keyboard to factory default settings by pressing the "Razer Logo" button for 15 seconds while the Razer Lycosa is connected to a powered on computer. NB: ALL CONFIGURATION SETTINGS WILL BE LOST WHEN YOU RESET THE RAZER LYCOSA
TO FACTORY DEFAULT SETTINGS. ALL CONFIGURATION SETTINGS WILL NEED TO BE
RE-ENTERED OR LOADED FROM THE CONTROL PANEL AFTER THE RAZER LYCOSA IS RESET.

This is going to sound really stupid, but if I was just having the exact same problem as you. I launched the Razer Synapse 2.0 program and save that my up key had a macro that did nothing. Once I changed that back to the default single up key function, it seems to be working fine.

Check to make sure that you Windows Operating system is up to date and check and make sure your system is up to date, especially updating all sound drivers and USB board drivers from your motherboard and computer manufacturer.
You can update your operating system by following the following link:
http://windowsupdate.microsoft.com

I had the same problem today. Don't know what caused it. But I turned off the Makos using the switch behind the subwoofer waited about a minute then turned them back on, problem solved.

Hope this helps you and others who encounter this problem.

replace the jack that plugs into your player. it has an open in it

I think that cable of your razer is broken and some cables are shortcircuited, don't plug it in computer, you could ruin your motherboard. If you want your mouse working and have some technical skills, buy some usb cable with same plug as mouse have and replace it

find new hardware wizard . microsoft uaa driver for high divinition audio

Razer Support should be able to assist you with this.

www.razersupport.com

i will give some sites just download from those.......

desktops.consumerelectronicsnet.com/articles/viewarticle.jsp?id=295930

digitalprosound.digitalmedianet.com/articles/viewarticle.jsp?id=31529-0

www.bizrate.com/miscellaneous/products__keyword--audio+sound+cards__nodum--1__nwylf--1.html

postproduction.digitalmedianet.com/articles/viewarticle.jsp?id=146756

www.calibex.com/sound-card/zzcalibex2zB1z0--search-html

www.mediaworkstation.com/articles/viewarticle.jsp?id=297600