Question about Kyocera Copystar CS-1820 Black and White Copier

2 Answers

Cannot Print Using KM1820

I have a problem when printing using KM1820... After Clicking OK, there is no sign of printing. And there is no sign of sending and receiving.... What shall I do????

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Kyocera Mita copier problem? tawag lang po sa number na ito 09483879552 or 09154815219
NAg aayos po kami kahit anong klase ng kyocera mita copierspara sa karagdagang detalye tawag lang po or
mag text sa mga number na nasa itaas ...salamat

Posted on Jan 11, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 126 Answers

Make sure that you downloaded the correct drivers....Etc... (x64) vs (x86) also make sure you have the proper script # driver ... Etc... #5.1 vs #6. You will want to completely uninstall all the old drivers, shut down your computer --- do not just reboot, reinstall all the new drivers,and after your computer is done rebooting – shut it down and restart.

Posted on Jan 05, 2009

  • jpd8 Jan 12, 2009

    How can you say " inappropriate" ?? You stated that it will not "print" !! That means that you have a computer hooked to this device!!!! I am going off of what you stated not just pulling this out of the air. IF YOU DO NOT KNOW WHAT YOU ARE TALKING ABOUT THEN STATE THAT. We are here to try and help but we can only help ( go - on) what you tell (state) to us. Just because you MIS-state does not mean you should give us a bad rating. And people wonder why no-one wants to help them because when some one like me tries to help this is what we get. Not thank you, not that is not what I meant, but --- INAPPROPRIATE. Well, thank you.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does some txt print when using ctrl shift print to print a document or email and some lines do not print at all?


Hi,
There are two way email e-print.
A> Open email and select print area and see preview, if preview ok then you given print. If not ok then go to printer setting option and set printer paper or text. Then see print preview if ok then given print.

B> Second option is copy email print job any doc file or then print select and command given. But print before also check it print preview.
If any issue create i share a print related problems link please visit and read it. I hope solved your issues.

Source..ePrint Job Did Not Print

Thanks,
HP Phone Number

Jun 23, 2014 | HP Officejet Pro 8600 e-All-in-One Printer

1 Answer

Reset brother mfc8880dn


If you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information), please follow these steps. Before you factory reset the print server, we recommend that you print a configuration page before resetting the print server.
<For BRAdmin Professional ver.2.xx Users>
Start the BRAdmin Professional utility, by clicking Start => All Programs or Programs => Brother Administrator Utilities => Brother BRAdmin Professional Utilities => BRAdmin Professional.
  1. From the main BRAdmin screen double click the appropriate printer.
  2. Enter the print server password (The default password is "access").
  3. Click the Control tab
  4. Click the Restore Factory Defaults button
  5. Click the OK button when you have read the warning message.
  6. The print server will then reset back to its default values.

bradminsc.gif
<For BRAdmin Professional ver.3.xx Users>

  1. Start the BRAdmin Professional utility, by clicking Start => All Programs or Programs => Brother Administrator Utilities => Brother BRAdmin Professional 3 => BRAdmin Professional 3.
  2. From the main BRAdmin screen double click the appropriate machine.
  3. Enter the print server password (The default password is "access").
  4. Click Network Configuration tab, Control Panel and select Set Default.
  5. Click on Submit button.
  6. The print server will then reset back to its default values.

    bradmin4.gif
Via a web browser
Because web based management requires the TCP/IP protocol for communication, any reset option you see when managing the machine with a web browser, will not reset the IP address details that are set. If you wish to totally reset all the print server parameters we recommend you reset the print server by using the BRAdmin application.
To reset the print server (excluding TCP/IP parameters) follow these steps:
  1. Connect to the printer using a web browser.
  2. Click Network Configuration.
  3. Enter the print server password (the print server password is detailed in the user guide for the print server) if it's applicable.
  4. Click the Set Default link or Reset Print Server.
Via the control panel (only for network ready models)
  1. Make sure the machine is not operating, then disconnect all the cables from the machine (except power cable).
  2. Press the Menu or Menu/Set key on the control panel.
  3. Press up or down navigation key to select LAN or Network and press Set, Menu/Set or OK.
  4. Press up or down navigation key to select Factory Reset or Network Reset and press Set, Menu/Set or OK.
  5. Select Reset.
  6. Select Yes.
  7. The machine will re-start, re-connect cables once this is complete.

Jun 19, 2014 | Brother Office Equipment & Supplies

1 Answer

After setting up my C6380 for two sided printing it will not do side two.


You are ticking the box for 'Print Both Sides' aren't you?
I find it quicker to print Even sides only,
then reload the paper (same order as it comes out printed Even sides) and tell it print Odd sides only
Try that.

Jan 01, 2014 | HP Office Equipment & Supplies

1 Answer

I'm using a wireless canon pixma mx350 but am unable to print web pages, in particular from a HSBC site. As soon as I click print, the printer disappears!


1.Try doing Ctrl+S and saving the webpage to your computer first. Then open the saved webpage and try printing from there. 2. If that doesn't work, try right clicking in the portion of the page you wish to print, and doing "Print This Frame". 3. If that is not an option, try using Ctrl+P instead of clicking on the print button. This should bring up the print dialog. 4. Otherwise, try using Ctrl+A to select everything, Ctrl+C to copy it, open a new Word document and use Ctrl+V to paste it. Then try printing the Word document.
Good luck! And PLEASE leave me positive feedback!

Jul 27, 2011 | Canon PIXMA MX350 Wireless All-in-One...

1 Answer

I am trying to print and it says printer offline. I just put in a new black cartridge. I know my color cartridge is low too, but I only want to print out a document with black. But it says alignment...


First Try using the HP Print Diagnostic Utility in Windows - HP Customer Care (United States - English)

if this dont work:

Second :
  1. Open Printers by clicking the Start button 4f6cbd09-148c-4dd8-b1f2-48f232a2fd33.png, clicking Control Panel, clicking Hardware and Sound, and then clicking Printers.

  2. Right-click the printer you want to use, and then click Set as Default Printer. A check mark is displayed on the printer icon to mark it as your default printer.

gl_ico.png Tip

To add a shortcut to Printers on your Start menu, right-click the Start button 4f6cbd09-148c-4dd8-b1f2-48f232a2fd33.png, click Properties, and then, on the Start Menu tab, click Customize. Select the Printers check box, and then click OK.


If you need more help come back.Post / thumbs / testimonial are welcome!

Nov 12, 2010 | HP Photosmart C5580 All-In-One InkJet...

1 Answer

How do I print a fax confirmation on my hp officejet J4580


Press setup (wrench sign button ) button on printer and use arrow keys to goto print reports menu , press OK on print reports menu , under this select fax confirmation and press OK, it will print the confirmation page.

Apr 08, 2010 | HP OfficeJet J4580 All-In-One Laser...

1 Answer

I installed the laser hp 1100 on windows xp


Your problem is your PC parallel port is not configured or turned on. I would first look in the control panel, device manager and see if you have a parallel port listed and it does not have a yellow or red sign on it. If red or yellow then it is on but not configured. See below for that solution.
If it does not appear, reboot your PC and enter the bios. Find the setting for the parallel port and set to enable. If on you can change the setting on what type of parallel it is emulating. Normal is bi-directional IEEE.
Then save and restart to go into Windows. Test and print.
OK, if the parallel port in the DEVICE MANAGER shows a yellow or red sign on it, it has a bad driver, or bad settings. Un-install the port by right clicking and choose UN-INSTALL. Restart your PC and it should find the parallel port and install it again. Hopefully without the yellow or red sign on it. If the red or yellow sign is back. Look on the internet for the newest driver for your motherboard.

As a note: if you are using a print server or USB to parallel adapter these solutions won't help. You will have other issues to address.

Good Luck

Dec 17, 2009 | HP LaserJet 1100 Printer

2 Answers

My printer will not print. it is a z611 lexmark. it says its communicating, but it will not print. the documents are in the printer queue.


try to check if you have connected properly your printer cable into your computer. check if you are using the right port in the printer configuration .

If you are using a windows xp system.
Check the printers and faxes control panel .
then
right click and click properties.
You can see a panel there in which you can set the default port you are using..

Aug 29, 2009 | Lexmark Z611 InkJet Photo Printer

1 Answer

THE PICTURES ARE NOT CENTERD ON THE PAPER THERE IS A WHITE BAND APROX 1/4 TO 3/4 OF AN INCH LEFT UNPRINTED


Try opening a picture and printing it, except instead of clicking OK to print, find the button that says preferences and check the setting there. Adjusting these settings should help square up the photo on the paper. You may also try using an option in there called Defaults that will print using default settings and that should print just like it did when you first got the printer.

Jun 06, 2009 | HP Photosmart D7360 All-In-One InkJet...

1 Answer

Not printing whole page


Could be as simply as the right print margin in the application you are using. Try printing a test page by right-clicking on the printer in Printers and Faxes in Control Panel and select Properties. If the test page prints ok then check the margins in the application you are using - usually File>Page Setup. The right margin could be set to 5.0 in instead of 0.5 in.

Dec 15, 2008 | Lexmark X2600 InkJet Printer

Not finding what you are looking for?
Kyocera Copystar CS-1820 Black and White Copier Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

NewYork kyocera HP...

Level 3 Expert

513 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Tech Bravo
Tech Bravo

Level 2 Expert

337 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...