Question about Hoover UH70120 WindTunnel TSeries Rewind Bagless Upright Vacuum Cleaner
I took off the dust canister and then the 2 Phillips screws on top of the rewinder. I was searching how to get at the rewinder so I took out the HEPA filter and holder. I then pressed down on the rewind leaver and it rewound. I am not sure why but maybe what I removed was putting some pressure on the rewind mechanism or I just had good luck.
Posted on Dec 20, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I am thinking that the cord goes in on the back, just below the handle. Remove the handle, then from the front, remove the tool holder(#8), then you can get to where the cord comes in and hooks up.
Posted on Feb 12, 2008
Have you tried to plug the vaccuum in another outlet that is on another breaker? It could be the vaccuum tripped the breaker. Turn the breaker back on. The manual mentions the thermal protector could have been activated. If this happened it resets and your vac should run after 30 minutes. I have a Widepath Tempo and it has tripped the surge protector. If this is the problem try turning some things off that are also on that breaker/outlet, or unplug them when you use the vac.
Posted on Jan 06, 2009
Can you verify the model number? However, based on your posted description, it sounds like the flat belt is either broken or fell off. to access the belts turn it over and remove the bottom plate (4 screws). the Flat belt will connect to the motor shaft in the back and the large black pulley.
Posted on Mar 14, 2009
I had the same problem with my Hoover s3639. The cord rewinder started squeaking, and retracted less and less of the cord each time, until it finally stopped retracting the cord at all. Here is what I did. I hope it will work for you as well. Open the covered tool storage and remove the tools. You should see three screws. Unscrew the screws. Remove the cover. You should see the motor for the vacuum and the cord rewinder. Between the vacuum motor and the white wheel where the cord is, you should see two brass wheels that turn into each other in order to operate the cord rewinder. Spray a small amount WD-40 between the two brass wheels. This should solve your problem.
Posted on May 04, 2009
Tips for a great answer:
Sep 17, 2015 | Hoover Vacuums
Mar 30, 2015 | Hoover Vacuums
Oct 01, 2014 | Hoover Vacuums
Jun 02, 2011 | Hoover Company Wind Tunnel U53019 Upright...
Jul 21, 2010 | Hoover UH70120 WindTunnel TSeries Rewind...
Mar 08, 2010 | Vacuums
Nov 18, 2009 | Hoover Company Wind Tunnel U53019 Upright...
Apr 18, 2009 | Hoover U5753-900 WindTunnel Bagless...
Dec 29, 2008 | Hoover S3639 WindTunnel Bagged Canister...
Nov 17, 2007 | Hoover U6437-900 / U6439-900 Windtunnel...
Apr 23, 2016 | Hoover UH70120 WindTunnel TSeries Rewind...
935 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: