Question about Kaz Honeywell Tower Air Purifier with IFD (HFD-120) Air Purifier

3 Answers

Reset filter I cleaned the filter on my air purifier and reinstalled it. Now every time I turn the thing on it says reset filter. I've cleaned it and cleaned it and made sure it's in correctly, but it still says reset. What could be the problem? Thanks in advance!!!

Posted by on

  • bmhayek May 18, 2008

    I have the same problem- I cleaned he filter as instructed-replaced as directed and started the filter- and the filter light stays on-it does not go out when pressing the reset button

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

The solution is simple. Just press on the little red light that says to reset filter. Its a button that will reset the warning and the light should go out

Posted on Dec 02, 2007

  • dave Dec 28, 2011

    I have pressed it waited for the light to blink three times . It doesn't turn off. it Just
    keeps blinking.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I used the pen to push the reset button and now nothing works at all!

Posted on May 11, 2010

Ad

Use a pen or pin and push the reset button (in the light)

Posted on Oct 06, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hunter hepatech 40882 uvc air purifier won't turn after cleaned filters


Hello, this is Ava with Think Crucial.

Filter life counters should be reset each time the filter has change. If your air purifier has a reset button, press and hold the reset button until the lights go out. You may also unplug your unit from the power for 30 seconds before plugging it back on if your unit doesn't have a reset button.

You can purchase a wide variety of high quality Hunter replacement parts for your Hunter Air Purifier direct from Think Crucial with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10

http://www.thinkcrucial.com/search?type=product&q=hunter

I hope this was helpful.

Ava B.
Think Crucial Customer Care
http://www.thinkcrucial.com/

Oct 24, 2016 | Hunter Air Purifiers

Tip

How to Reset Your Air Purifier Filter Light


<span style="font-weight: bold;">Airgle Air Purifier:</span><br /> <ol> <li>Turn off and unplug the unit </li> <li>Press the light button to the "on" position </li> <li>Plug in the unit, and then release the button after the Filter-check starts</li> <li>The system will automatically reset the Filter-Check Gauge in about 25 seconds</li> <li>Once the procedure has completed resetting, please turn on the unit and press "Filter Check" button again.</li> <li>This time, the system should report an accurate result. </li></ol><span style="font-weight: bold;">Alive Air Purifier:</span><br /> <ol> <li>Insert a straightened out paper clip into the reset hole, with the unit off, and push the Timer button.</li> <li>You should hear a 2 beeps, signaling that the Reset was successful.</li></ol><span style="font-weight: bold;">Holmes Air Purifier:</span><br /> <ol> <li>Units which have an indicator light must be reset once the HEPA filter has been replaced. Reset indicator by inserting a small object (such as a pin or paperclip) into the hole marked reset.</li></ol><span style="font-weight: bold;">Honeywell Air Purifier:</span><br /> <ol> <li>Reset the filter indicator by pressing and holding the "Filter Monitor" button until the indicator light shuts off.</li></ol>or<br /> <ol> <li>With the unit powered on, press and hold the appropriate filter<br />indicator button down for approximately 10 seconds until the<br />light turns off.</li></ol><span style="font-weight: bold;">Hunter Air Purifier:</span><br /> <ol> <li>Change the filter and/or pre-filter.</li> <li>Now, you must choose which counter you want to reset. Press and hold the filter reset key (approximately three seconds) until the prefilter indicator flashes. Press and release the reset key again to alternate between the two indicators. The counter that will be reset is designated by the flashing indicator. For Models 36394 and 36395: Use the tip of a pen or pencil to press the key.</li> <li>Once you have the correct indicator flashing, press and hold the reset key for three seconds to reset that counter to zero hours. The indicator will stop flashing when it has been reset. If needed, repeat these steps to reset the other counter.</li></ol><span style="font-weight: bold;">IQAir Air Purifier:</span><br /> <ol> <li>To reach the Filter Life Reset function from the main display window, press the Menu key seven times.</li> <li>Press and hold the Enter key until the flashing cursor appears. Release the Enter key. The first filter selection to appear is the Pre-Filter.</li> <li>Press the Up Arrow key to select the filter that has been replaced. The Filter Life LED for the appropriate filter is now flashing red.</li> <li>Press the Enter key to confirm that the selected filter has been replaced. The filter life LED for the appropriate filter is now flashing red.</li> <li>Press the Enter key one more time to confirm the filter change or to exit without resetting the filter life, press the Menu key (M=Menu).</li> <li>Upon successful reset of the filter life, the new remaining filter life (taking the currently selected fan speed into account) will be displayed, and the filter LED light on the control panel will change from red to green.</li></ol><span style="font-weight: bold;">Kenmore Air Purifier:</span><br /> <ol> <li>Press the FUNCTION and OFF TIMER buttons at the same time for five seconds. The CHANGE FILTER INDICATOR will flash five times and turn off </li></ol>

on Jun 17, 2011 | Air Purifiers

2 Answers

Can somebody help fix the problem I'm having with my Honeywell air purifier....when I press power button it won't work all I see is red light any button I press red it wont do anything....pls!!!!.....


I have the same unit.
Have you cleaned out the removable filters?
also the red light at the bottom indicates the time to clean the filters.
to reset it, use a paper clip. The red light on the bottom right is the filter indicator light, what looks like it should be a light beside that filter light, is actually a reset button, just poke it with a paper clip for a few seconds to reset. The bottom red light goes out

Jun 07, 2016 | Honeywell Air Purifiers

7 Answers

Need to reset my homedics hepa air cleaner


Press the lit reset button indicator and hold it for some time (I think it's like 5-6 seconds at least)

Oct 24, 2011 | Homedics AR10 Air Purifier

1 Answer

Fresh air is reading perform cleaning. exactly what does that mean,I cleaned the filter and the plate but it stii reads perform cleaning.HOW


After you have cleaned the filter and plate, reassemble the purifier. Plug it in, turn it on, when the message perform cleaning reappears, press the Reminder Reset button on the purifier to clear the message. Now you are good to go for another 30 days.

Feb 22, 2010 | Ecoquest Fresh Air Air Purifier

1 Answer

Install Plate Displayed


Call toll free 1-877-710-0057 and they will gladly help you.

Jun 03, 2009 | Ecoquest Fresh Air Air Purifier

2 Answers

My sharper image air purifier cleaning light comes on


Can you clarify the problem.. all I can see is 

"My sharper image air purifier cleaning light comes... when it is clean"
The light that informs you that its in need of clearning comes on even though it is clean?

make sure the purifier is completely clean and reset it by unpluging it from the powersource for 30 minutes, the manual may include a reset process which might fix the problem.

Nov 28, 2008 | Sharper Image Professional Plus Ionic...

5 Answers

Clean Filter Red light


I cleaned the filters as well earlier and the red filter light still blincked to clean the filters. Then I pushed the power button for about 10 seconds continously and then turned it on and the light turned off.

May 22, 2008 | Brookstone Pure-Ion UV Air Purifier

1 Answer

Kaz Honeywell Tower Air filter rest light


When the filter monitor light remains on, it is time to check/clean the IFD™ filters and reset the filter
monitor, if needed. With the unit powered on, insert the tip of a ball-point pen or paperclip next to the LED
filter check light and hold for approximately 5 seconds until the light turns off (Fig. 3). Depending upon
your individual usage (environment and hours used), you may need to check and clean the filters more or
less frequently. If the IFD™ filters are cleaned before the filter monitor light turns on, the filter monitor
should be reset at the same time.

May 18, 2008 | Kaz Honeywell Tower Air Purifier with IFD...

Not finding what you are looking for?
Air Purifiers Logo

2,848 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kaz Air Purifiers Experts

Marvin
Marvin

Level 3 Expert

81294 Answers

Michael Youngman
Michael Youngman

Level 2 Expert

235 Answers

Brad Brown

Level 3 Expert

17432 Answers

Are you a Kaz Air Purifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...