Remote control for targa visionary LT 2210.I WANT TO BAY.FROM WHERE

look for any small screws in the battery compartment
or on the back casing

other wise it is all plastic tags and clipped togeater
you may break the remote
with care prise the sides of the casing open

make sure the batteries are facing the right way

if batteries leaked or corroded
clean the battery terminals and spring with fine grit sandpaper

on and around the buttons or letters
try a baby wipe or soft tissue nothing harsher
or the white stuff will come off

answered you in your other question

http://www.fixya.com/support/t26273627-fix_or_clean_remote_control

Unplug the TV for 5 minutes and see if it clears. Is there a mute message icon on the TV screen (picture of a tiny speaker with a line through it)? It turns off anytime the volume control is touched automatically, so if that doesn't happen you have a problem with the TV itself.

Replace the batteries in your remote.

sounds like the power board on your tv is shot.... whats happening is a capacitor or other component is getting hot .... as a fail safe your tv shuts off...... may get lucky and be able to open the back of the tv and use a can of compressed air to blow out the inside and it may start working correctly..... dust acts as a heat adsorbing shield on components so it will build up heat really quickly and then the heat has no where to go

Go to www.targa.de

Are you sure ?
i have the same problem 1 of the 8 black trafo was defect?
its working fine now...

Manual for Targa Visionary LT 1910 DVD (EN, SE, NO, HU, DK, HR, SI, GR)


Manual for Targa Visionary LT 1910 DVD (FR, IT, ES, NL, PT)