- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check this link out John - see if it helps http://wiki.answers.com/Q/Where_is_the_dipstick_mr2 -
Where is the dipstick mr2?
In: Toyota MR2 [Edit categories]
"" frameBorder=0 width=600 allowTransparency name=google_ads_iframe_/51859126/answ_desktop_question_answered_600x300_alt_0 marginWidth=0 scrolling=no
On the second generation MR2 and MR2 Turbo (1991 through 1995 USA, and 1991 through 1999 for the rest of the world), it is on the FRONT side of the engine, between the engine and the rear firewall of the cabin area. It is the right side of the car.
You\'ra asking about a 22 year old vehicle. I wouldn\'t take that for free & certainly not pay for it. Get something newer. Any vehicle over 12 to 14 years old, isn\'t even worth working on, unless you have decades of experience & do all your own work. If you know nothing about cars, you need something fairly new.
Radio code is specific for each and every car.
It is specific like anti theft code.
You can get it by providing your VIN# and registration details in
authorized dealership. Nobody else can provide you. If anybody can
provide you that , then there is no meaning of security for your car.
Its not fun. If you are a MR2 owner you need the BGB. There are 2 Big Green Books that can be purchased at Toyota.( mechanical and electrical).........or you can use www.mr2-tech.com. The have the step by step procedure on how to do it with pictorial from the BGB. good luck and also go to the MR2board.com and register there. you will find tons of great write ups and tech facts.
You have to drop the gas tank. Its inside the tank and under the car. Which is between the seats. Take the ash tray out, radio bezel, and center console off. (The one between the seats). Then you will see the wiring in front of the gear shifter, and under the radio area. Disconnect all wires. The do the hard lines in the engine compartment. Make sure to disconnect ALL the lines! you dont want to bend or brake them.