a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
HelloThe remote controls for Yamaha are very difficult to get from open electronic spare part market; and is very difficult to synchronise with other universal remote controls. Even though it can be synchronised with any universal remote controls, all functions will not work properly.So it is best to get an orginal one. Contact the Authorised Service Center for Yamaha at your town. They can provide you the orginal one. The cost will be a little bit more, but original is original. OK.
Hi, Your player has been set on remote mode 3, you need to change remote control itself on remote-3 so unit can get remote signals. Set the command mode for the remote so it matches the command mode for the recorder. Hold down ENTER. While holding down ENTER, enter the command mode code number using the 3 number button. Hold down both the number buttons and ENTER at the same time for more than three seconds. Remote control has been set on mode-3, now player will accept remote commands. Hope this will help you. Thanks.
satellite tuners and DVDs have different remote,unless your using a universal remote with satellite tuner command available.to program recording, you'll need to program the time especially the allotment.then make sure you sat tuner is tuned to the station you want to record.after setting the time and station, its all set.you don't need the DVD's remote to change the channel.
Follow-up to the person who quoted from page 29 of the manual: Not sure if this will work w/the particular remote you have, but for the remote that ships w/RDR-VXD655 you can change the command mode in which it is operating by holding the Enter key on the remote and pressing the respective digit appearing in the LCD. In your case that means while holding the Enter key, press 1.
Go to your DVR and manually turn the DVR off. Press the STOP button for two or three seconds. The DVR COMMAND MODE setting will display in the DVR window. (DVD1, DVD2 or DVD3)
Set the remote to the COMMAND MODE setting that was diaplayed by depressing both the remote ENTER key and the desired number key (1, 2 or 3) and holding them both at the same time for 3 seconds.
You can now use the remote to set the DVR to the desired COMMAND MODE. To do this depress SYSTEM MENU on the remote and go to SETTINGS and then COMMAND MODE. Select either DVD1, DVD2 or DVD3. Once you delect a setting that is different from what was set, your remote will stop working again.
Reset your remote to the desired COMMAND MODE by depressing the remote ENTER key and the desired number key (1, 2 or 3) and holding them both at the same time for 3 seconds. The remote should now control the DVR.