Question about JVC GR-D370 Mini DV Digital Camcorder

1 Answer

My JVC GR-D77OU Mini DV Digital Camcorder is giving me the next messages: eject en reinsert tape. unit in safeguard mode. After ejectirn and reinserting the video tape it still does the samething. I have changed several tapes and I get the same result. I also went to SYSTEM and reset it but no luck. Any suggestions?

Posted by on

  • don_hector06 Jan 03, 2009

    Thanks Taisha, I tried your solution but...it didn't work.

    Thank you anyway, I will take this unit to the place where I bought it and have it fix. (I think I stil have some guarantee on it)

    Don_hector



    Any more sugestions???

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 44 Answers

Remove the battery and or the power supply (plug), leave it out for a few minutes, then reattach. This should solve your problem.

Let me know if this helps....

Posted on Jan 03, 2009

  • Taisha J
    Taisha J Jan 03, 2009

    If that didn't work, the there is a defect in the camera....

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

MY CAMERA SHOW E03 ;unit in safeguard mode ;EJECT AND REINSERT TAPE WHT SHOULD I DO............


JVCGR-D270.Digital Camcorder. When we put the tape in the cam it chews the tape whiles loading and says that it's in 03 safe guard mode. Please help.

Jan 24, 2011 | JVC GR-D73AG Mini DV Digital Camcorder

1 Answer

Gr-dvl-520u trying to record or playback tape it goes into safeguard mode within 5 seconds. alternatly pressing play and still every 3 seconds advanced the playback without it going into safeguard mod


According to http://www.techlore.com/article/10974/JVC-Camcorder-Stuck-in-Safe-Mode/,

"JVC notes that you are also given a malfunction code when the unit is placed into safeguard. If it displays code 01, 02, or 06 you should remove
the battery and powersupply and wait for a while. Code 03 and 04 indicate that you should eject and reinsert the tape.

If neither of these solutions work, your only alternative is to bring it to a shop or send it to JVC for diagnosis or repair. Unfortunately, there is no other way to clear the condition."

If you are getting E03 or E04 errors on every tape you try, it sounds like a servicing is required.

Apr 17, 2009 | JVC Cybercam GR-DV500US Mini DV Digital...

1 Answer

Unit stuck in safeguard mode


I can't find e setup for sony
camcorder

Dec 30, 2008 | JVC GR-D270 Mini DV Digital Camcorder

2 Answers

Jvc digital video camera mini dv gr-d244u


I have had the same problem...usually had success by taking off the battery, putting it back on, turning the power off and on, etc.  It has always gone back in eventually.  I also tried re-charging the battery and replacing.  Could this be an old battery problem?  Mine is 4.5 years old.  

Jan 06, 2008 | Panasonic Palmcorder PV-GS9 Mini DV...

1 Answer

Safegaurd mode


Unfortunately this is a repair issue. There are several failures that can occur, none of which will be resolved without service, that create this safeguard situation. Often the fpc cable which carries sensor information to the micro has been injured and that requires repair. Good luck, magic seadog

Aug 07, 2007 | JVC GR-D240 Mini DV Digital Camcorder

Not finding what you are looking for?
JVC GR-D370 Mini DV Digital Camcorder Logo

373 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Video Cameras Experts

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

Shekar Avadhani

Level 2 Expert

60 Answers

mikeuk

Level 2 Expert

61 Answers

Are you a JVC Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...