An expert who has achieved level 2 by getting 100 points
An expert who has answered 20 questions.
An expert that has over 10 points.
An expert whose answer got voted for 2 times.
Re: Samaung 300 clp series
Are the toner cartridges genuine? If not then they may contain inferior toner. If your cartridges are genuine then you will need to change the setting of your printer in the computer to try and get a higher resolution
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is a lot of problems that can cause the light to turn red, such as paper jam, low toner, full waste toner tank, etc. The only real way to know what the printer is detecting is to use the smartpanel utility program. It should be able to tell you what the printer fault.
There is a lot of faults that cause the red light to turn on, toner cartridge empty, waste toner tank full, paper jam, imaging unit replacement, etc. The only real way to know what the problem the printer is seeing is to use the smartpanel utility on your PC. It will show you what the printer is reporting and how to correct it. Hope this helps you.
control toner shake cartridge and try again you can clean printer with dry air from compressor blow all the dust and toner thad are insite away control also small strip in the printer witch clean the rest of drum (about 1 cm with and 15 cm long)
This is a very common problem with the Samsung CLP 300 and CLX 3160 printers. What happens is that the toner or developer blades become coated with toner. The developer blades meter the amount of toner that the printer uses to make the image on the paper. When the blade become blocked, the image become faint. To fix this problem, you and either replace the imaging unit for about $100 or you can clean the blades yourself. I have posted instructions how to clean them on my Tips section.
For starters remember this is not meant to be a PHOTO Printer, I am guessing the Spearing is because Glossy paper does not hold the toner like Regular paper or at least until it is fused. I am a technitiian and i also own this printer.