Question about JVC GR-D370 Mini DV Digital Camcorder

Open Question

Unit in safeguard mode???

My JVC gr-d770u was working fine, then all the sudden the camera is giving me the next message:
eject en reinsert tape.
unit in safeguard mode.
After reininserting the tape nothing happens and it keeps giving me the same messages.

Posted by on

  • 1 more comment 
  • nutoi71 Jan 06, 2009

    I have the exact same problem ,my camera is a jvc GR-D73AA I am desperate to fix this problem

  • JEMSA01 Apr 05, 2009

    I HAVE THE SAME PROBLEM

  • Anonymous Apr 28, 2009

    how can i get this fixed???!!!!

×

5 Suggested Answers

magic seadog
  • 38 Answers

SOURCE: safegaurd mode

Unfortunately this is a repair issue. There are several failures that can occur, none of which will be resolved without service, that create this safeguard situation. Often the fpc cable which carries sensor information to the micro has been injured and that requires repair. Good luck, magic seadog

Posted on Aug 12, 2007

JDeRuvo
  • 48 Answers

SOURCE: JVC Camcorder Model # GR-D270U

On page 51 of your manual, it states that an error has occurred and recommends resetting it by removing your battery, waiting a few minutes to clear it, and then resuming. If that doesn't clear the issue, then it may need servicing.

J. DeRuvo
Digital Camcorder HQ

Posted on Dec 04, 2007

Taisha
  • 44 Answers

SOURCE: My JVC GR-D77OU Mini DV

Remove the battery and or the power supply (plug), leave it out for a few minutes, then reattach. This should solve your problem.

Let me know if this helps....

Posted on Jan 03, 2009

welcomejee
  • 10594 Answers

SOURCE: JVC GR-DV3000. Goes to

Hi,
If camcorder accepts normal MiniDV tape without any problem and you can record or playback it correctly then please try another brand video head cleaning tape as existing head cleaning tape might be not good that is why camcorder rejects it.
Hope this will help.
Thanks.

Posted on Mar 30, 2011

caroldon
  • 17129 Answers

SOURCE: my JVC GR-D32 keeps saying

Use a hair dryer heater into the opening tray to warm up the inside. It is possible that the DEW SWITCH is triggered and so the system goes to safe mode so that it does not entange if moisture is present on the drum. If not there are errors on the servo section and can be a failure on the board.

Posted on Jul 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gr-dvl-520u trying to record or playback tape it goes into safeguard mode within 5 seconds. alternatly pressing play and still every 3 seconds advanced the playback without it going into safeguard mod


According to http://www.techlore.com/article/10974/JVC-Camcorder-Stuck-in-Safe-Mode/,

"JVC notes that you are also given a malfunction code when the unit is placed into safeguard. If it displays code 01, 02, or 06 you should remove
the battery and powersupply and wait for a while. Code 03 and 04 indicate that you should eject and reinsert the tape.

If neither of these solutions work, your only alternative is to bring it to a shop or send it to JVC for diagnosis or repair. Unfortunately, there is no other way to clear the condition."

If you are getting E03 or E04 errors on every tape you try, it sounds like a servicing is required.

Apr 17, 2009 | JVC Cybercam GR-DV500US Mini DV Digital...

1 Answer

My JVC GR-D77OU Mini DV Digital Camcorder is giving me the next messages: eject en reinsert tape. unit in safeguard mode. After ejectirn and reinserting the video tape it still does the samething. I have...


Remove the battery and or the power supply (plug), leave it out for a few minutes, then reattach. This should solve your problem.

Let me know if this helps....

Jan 03, 2009 | JVC GR-D370 Mini DV Digital Camcorder

1 Answer

Unit stuck in safeguard mode


I can't find e setup for sony
camcorder

Dec 30, 2008 | JVC GR-D270 Mini DV Digital Camcorder

3 Answers

Well mine is a JVC GR-D770U. Can you help me?


Hi! I have a JVC GR-D770U camcorder and I can not close the tape deck. When I turn it on i says unit in safeguard mode - remove and reattach battery or dc plug but when I do that it just keeps saying the same thing. Can you please help me?

Mar 31, 2008 | JVC GR-D370 Mini DV Digital Camcorder

1 Answer

Safegaurd mode


Unfortunately this is a repair issue. There are several failures that can occur, none of which will be resolved without service, that create this safeguard situation. Often the fpc cable which carries sensor information to the micro has been injured and that requires repair. Good luck, magic seadog

Aug 07, 2007 | JVC GR-D240 Mini DV Digital Camcorder

4 Answers

Unit in safeguard mode


You mix te info with Write protected tapes.
Safe guard mode is caused by the motor that takes the tape out of it's case, through the mechanics and past the video head.
If for some reason the electronics detect that it's been done by too much force, the safe guard issue promts.

Mar 29, 2007 | JVC GR-D290 Mini DV Digital Camcorder

Not finding what you are looking for?
JVC GR-D370 Mini DV Digital Camcorder Logo

394 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Video Cameras Experts

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

Shekar Avadhani

Level 2 Expert

60 Answers

mikeuk

Level 2 Expert

61 Answers

Are you a JVC Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...