Question about Fargo HDP5000 Thermal Printer

Open Question

I get error 93 everytime I send something to print - wrong ribbon, but the ribbon is right

When I press the resume button after the error message is shown, the print goes fine. But I have to press it everytime

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 526 Answers

SOURCE: Problem while printing black on the black side

check the printer driver and see if YMCKK is selected in the driver.

Posted on Apr 23, 2009

Ad

SOURCE: Wrong ribbon messages

Your printer ribbons sensor maybe broken or you could have a main board problem. Call Realstar Solutions 800.554.9111

Posted on May 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Every time I try to print I get an error message as follows: Error Message 1700: Waste ink absorber is almost full. Press resume to restart. My manual says nothing about a "waste ink absorber" so...


1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

Nov 18, 2010 | Canon PIXMA iP2000 InkJet Printer

1 Answer

I have a Fargo DTC550 Printer and laminator which i just got yesterday and after setting it up by carefully following every instruction in the manual it keeps displaying "Wrong Ribbon Installed" "An...


in windows 7 go to start>Devices and Printers> Right click on DTC550 and go to printing preferences then click the Device Options tab and click auto ribbon select

Oct 20, 2010 | Office Equipment & Supplies

1 Answer

Canon Color Bubble Jet Printer i550 wiil not print - (greenlight then orange light blinks 8x - then green light) When attempting to print receive "Printer not responding" - "Paper thickness lever...


try this. It is the reset for the waste ink error (8 flashes)

1) With the printer power OFF, while pressing the Resume button, press the Power button. (Do not release the
power button.)
2) While pressing the Power button, release the Resume button, press the Resume button again twice, and then
release the Resume button and Power button.
3) The green indicator flashes during initialization.
When the indicator stops flashing and remains on, press the Resume button 4 times to clear waste ink message.
(The indicator toggles between orange and green each time the Resume button is pressed.)
4) Next, press the Power button, and the green indicator will light, and the function will be executed.
5) Turn off the printer then back on and error should clear.

Aug 04, 2010 | Office Equipment & Supplies

1 Answer

Hi, We have had the Canon ip3000 pixma for about 5 years now. No probs., very pleased with it. It is sending me a message which I have never, ever seen before, and I can find absolutely no reference to it...


Hi,
when you sprint something, there is some time delay in printer, wich is used by printer to replenish color on print head.That means that purge unit, purges the ink from print head, to optimize printing or just clean the print head. Then the waste ink, ink wich is purged goes into absorber, its some kind of absorbing cloth under purge unit.
After certain number of purging, printer will automatically report absorber full.
You can clear the error in printers service mode:

<Service mode operation procedures>
1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the
Power button. (DO NOT release the buttons. The LED lights in green to indicate that a function
is selectable.)
2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the
Power button.)
3) While holding the Power button, press the Resume/Cancel button 2 times, and then release
both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed,
the LED lights alternately in orange and green, starting with orange.)
4) When the LED lights in green, press the Resume/Cancel button the specified number of time(s)
according to the function listed in the table below. (Each time the Resume/Cancel button is
pressed, the LED lights alternately in orange and green, starting with orange.)

4 times Green Waste ink counter resetting

Green means LED .

But 100% soulution would be to replace waste ink absorber.

Hope that helped!
emma.servis@gmail.com

Jul 03, 2010 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

Cant print. error message wrong cartridge, cant change


try this,
1: Remove Cartridge
2: Unplug the AC Power Cord
3: Hold down the RESUME button
4: Release RESUME after plugging in the AC Power cord.
5: Press the RESUME once within 5 seconds and release the RESUME .
6: Press and HOLD RESUME for two seconds or more and release it.
7: Press and HOLD RESUME for two seconds or more and release it.
8: Unplug AC Power Cord to set data.

Mar 24, 2010 | Canon PIXMA MP780 All-In-One InkJet...

2 Answers

What does error code 5100


For error 5100 try the following, I know it works on some Canon printers:
Unplug printer, press and hold "resume" button, press "power" button and hold down, release "resume", press "resume", release and press again. Release both buttons and now press "resume" 4 times. Power off. Re-start.
Hope this helps

Aug 18, 2009 | Canon Pixma MP500 All-In-One InkJet...

2 Answers

Error message says, waste ink absorber is almost full. Now i have to press the printer's RESUME button everytime i print. is there a way to reset?


Following step by step resetting canon Pixma iP90 :
Before resetting printer canon iP90, start with printer power off .
Press resume button coincide with power button.
While pressing power button, release resume button.
Press resume button 2 times and then release both button
Green LED indocator will blinking and then stopped blinking.
When the Power LED lights in green, press resume button 4 times.
Press power button and the printer power will off. otherwise off, depress again power button.
And the turn on the printer again, your printer canon iP90 should be response as normal.

Jul 31, 2009 | Canon PIXMA iP90 Mobile Printer

1 Answer

Will the printer become damaged because repeated error message?



Do a EEPROM initialization:


Service Mode
This printer has a service mode for service-related settings and for performing test prints. The operator panel buttons are used to enter the desired service mode.
Service Mode Operations
1) With the printer powered off, hold down the resume button and press the power button.
2) While holding down the power button, release the resume button and press the resume button twice in succession. Now release the power button. The
indicator will blink in green and remain lit in green.
3) Select one of the following service mode functions by pressing the resume button the specified number of times.
Press Resume Indicator Functions
Zero times Green Power off the printer
1 time Orange Service test print
2 times Green EEPROM information print
3 times Orange EEPROM initialization
4 times Green Waste ink counter setting
5 times Orange Destination settings
6 times Green Print head deep cleaning
7 times Green CD-R test print
8 times Orange CD-R print position correction (horizontal)
9 times Green CD-R print position correction (vertical)
4) Execute the function you have selected (except for model setting) by pressing the power button. The printer will switch itself off after performing the function.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe





Jun 26, 2009 | Canon PIXMA iP1600 Printer

1 Answer

Status Monitor informs of Ink levels requiring me to press resume button during and after each print job.


What it means is the tank to collect waste ink (from cleaning etc) is full.
Canon suggest you return ther printer for replacement of the absorbant mat, suggest you scour the web for DIY cures.

Oct 19, 2007 | Canon i9100 InkJet Photo Printer

15 Answers

Waste ink absorber on canon iP 1600


For Canon ip1000 and ip1600, maybe others

1. remove cartridges
2. unplug AC power
3. hold power button and plug AC power (keep holding power button.
4. press resume 4 times


The waste ink counter should be reset by now

Or

http://www.servicemanuals.ru/download/canon/ip1600.htm

Aug 13, 2007 | Canon PIXMA iP1600 Printer

Not finding what you are looking for?
Fargo HDP5000 Thermal Printer Logo

Related Topics:

1,251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fargo Office Equipment & Supplies Experts

Safe-Card ID...

Level 2 Expert

59 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Fargo Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...