Question about Kenwood VR-715 Receiver

Open Question

I have a kenwood vr-715 that keeps going into protect mode

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

cancerags
  • 36 Answers

SOURCE: Kenwood VR-715 reset?

Hello llarosa,

Yes, there is. Unplug the power cord from the wall outlet, then
plug it back in while holding down the POWER ON/STANDBY key.
That will clear the contents of the memory, reset the microcomputer and take the unit back to factory settings. Hope this helps. Let me know.

cancerags

Posted on Dec 31, 2007

dunnbiker
  • 8546 Answers

SOURCE: I have a vr-715 receiver kenwood, The standby

The only other likely cause is "it's broken". A hands-on tech needs to look at it.

http://www.retrevo.com/support/Kenwood-VR-715-Receivers-manual/id/480bh244/t/2/

Posted on Dec 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I connect my Kenwood VR-715 surround sound system, Dish Network receiver, and HD LCD TV together so the surround sound works? Can't figure out what goes in the input, the order of the connections or...


Hello,
The best way to do this is to connect you dish network receiver is directly to the tv. Try to use the best video type possible. HDMI is the best, next is component and lastly is composite. This will take care of the video portion. Next, connect digital audio output to the Kenwood Receiver. I dont know what type of a digital audio output your dish box has, but your kenwood receiver has both optical and coaxial inputs so you should be fine there. Once you have both audio and video wired, change the inputs on both your tv and kenwood receiver to the inputs you are connected to. You might need to set up the kenwood to tell it that your running digital audio to it in the setup menus. Hopefully this helps, let me know if you need any clarification.
Good Luck

Jan 08, 2011 | Kenwood VR-715 Receiver

1 Answer

Kenwood vr 357 surround system stand ny light keeps blinking when turned on but no sound no nothing when turned on just powers up for 7 seconds then shuts off with light blinking


This means there is a problem with the system it is in the protect mode it will not come out of that mode untill repairs are made. More than likley the power amp is blown.

Nov 06, 2009 | Kenwood VR-357

1 Answer

Cliks off when you turn up volume


This is an indication of protect mode. One thing to test here:

Does the unit shutdown only when you change volume? If you try turning up the volume really slowly, will the unit remain on?

Thanks,
Dan

Sep 21, 2009 | Kenwood VR-505 Receiver

1 Answer

Kenwood VR-715 reset?


Hello llarosa,

Yes, there is. Unplug the power cord from the wall outlet, then
plug it back in while holding down the POWER ON/STANDBY key.
That will clear the contents of the memory, reset the microcomputer and take the unit back to factory settings. Hope this helps. Let me know.

cancerags

Dec 31, 2007 | Kenwood KRF-V5060D Receiver

1 Answer

Kenwood VR-5090


Probably an issue with the switching power supply or possibly a shorted output. There are various protection circuits that will cause that. Most suspect is the SMPS (switch mode power supply) fault detection. (Check your output for a short though, i.e.shorted speaker wires)

Nov 10, 2007 | Kenwood VR-5900 Receiver

Not finding what you are looking for?

Open Questions:

See all Kenwood VR-715 Receiver Questions

Kenwood VR-715 Receiver Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

Eddie Dalton
Eddie Dalton

Level 2 Expert

53 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Kenwood Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...