Question about Fujinon Super 80 (25x80 mm)

1 Answer

My scope cross hairs seem to move i have a fujinon 3-9x42 Can it be fixed

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 153 Answers

No unfortunately it cant u should replace it

Posted on Jul 22, 2009

2 Suggested Answers

magoo23
  • 22 Answers

SOURCE: Yesterday I purchased a Bushnell

Paul,

to me it sounds like you have unfortunately been the victim of a manufacturers defect. the unique thing about shooting spring based airguns like your RWS and my Gamos is the effect of the recoil. it's different from traditional cartridge rifles but will never really be sufficient to ruin your scopes especially a bushnell. For now i would try to return your scope to the store you bough it from if that is within their returns policy. if not call bushnell at (800) 423-3537


here is their repairs process to help you decide what to do

(Verbatim)

To send product in for repair, please follow these instructions:
* USA Purchases Only
INSTRUCTIONS TO SEND PRODUCT IN FOR REPAIR
Package your product securely and include your name, street address, a daytime phone number, your email address, and a brief description of the issues you want addressed. Insure your product for the appropriate dollar value and send it to:
BUSHNELL (US Purchases Only)
Attention either: Bushnell or **Bausch & Lomb Repairs
8500 Marshall Drive
Lenexa, KS 66214

When returning product for repair, please do not send the product cases, lens caps, mounts, or straps.
SHIPPING & HANDLING FEES
Send in a check or money order for shipping and handling made out to Bushnell in the amount of:

$15.00 for Telescopes
$10.00 for all other products

(California residents are excluded from paying shipping and handling payments for warranted items only)
--> REPAIR PROCESS
When your unit is received it will be assigned a repair number. After reading your letter, a technician will evaluate your unit to determine what repairs are needed and whether or not warranty coverage will be applicable. It is our option to repair or replace your unit. If your unit is NOT covered under warranty, an estimate for repair or replacement will be mailed to you.

You will have 20 days to respond, either accepting or declining the recommendation. If you accept the recommendation for repair or replacement you will need to provide payment. That can be in the form of a check, money order, or if you prefer, by MasterCard or VISA. If the repair or replacement is covered under warranty, you will receive no additional correspondence. Your repaired unit or a comparable replacement of equal value and function will be shipped to you via UPS within 3-4 weeks.

Posted on May 06, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cross hairs broke on my scope it can be fix???


expensive if you are happy to pay if scope is worth it

Sep 14, 2013 | Optics

1 Answer

Which direction do you turn windage and elevation


To raise the point of impact, turn the elevation screw counterclockwise. To shift left, turn windage screw clockwise. If you raise the horizontal cross hair you will lower the point of impact of the bullet. If you move the vertical cross hair to the right the shot placement will go to the left. Make small adjustments tap the scope with a screwdriver handle to give it a shock, not to hard to help move the cross hairs and try to bore sight first. Hope this helps Fix ya up.

Jun 22, 2011 | Tasco 22 Riflescope

1 Answer

My bsa sweet 17 6-18 is shooting about 2 inches high at 100 yards. on the adjustment turret it has an arrow that shows which way to turn for up. What is moving up? the point of impact relative to the...


To raise the point of impact, turn the elevation screw counterclockwise. To shift left, turn windage screw clockwise. If you raise the horizontal cross hair you will lower the point of impact of the bullet. If you move the vertical cross hair to the right the shot placement will go to the left. Make small adjustments tap the scope with a screwdriver handle to give it a shock, not to hard to help move the cross hairs and try to bore sight first. Hope this helps Fix ya up.

Jun 02, 2011 | Bsa Optics Sweet 17 Target Riflescope...

1 Answer

I purchased a Fujinon 3.5-10X50 rifle scope a few years ago and mounted it on a Remington 7 MM Mag. I am unable to pull a group less than 12 inches at 200 yards and have not been able too since installing...


It is most likely the mounts not the scope. I would just install it on the new gun and check it there. Most times a scope that wanders is the mounts. One thing with big scope is they need to be tight or the recoil will move it in the mounts. Next due to being tight when the gun heats up it can and will tweak the scope in the mounts enough to move your center. Try it in your other gun, try 3 shot groups and let the gun cool. Recheck your center. If it is good with a cold gun all is well. If it moves from one day to the next it is the mounts. If you count the clicks to recenter, come back the next day and move it the same clicks, it is the mounts. If it is all over the place, day after day it is the scope.

Jan 21, 2011 | Fuji non 4-12x42mm Rifle Scope

1 Answer

My cross hairs do not move when i adjust my sights. i bought a laser bore sighter and the laser points in the same exact spot no matter how far i turn my adjustments nor do my cross hairs move.


This happens a lot during bore sighting, - no shock to the scope to jar the cross hairs. So take your screwdriver and use the handle - rap the scope or better just tap it. Not hard enough to bend/dent it but jar it so things can move if need to.

Jan 04, 2011 | Tasco Target/Varmint 6-24x42mm Rifle Scope...

1 Answer

Cross hairs wont move when trying to ajust


The cross hairs don't actually move when you adjust a scope, instead, they are contained within what is called the erector tube. When you adjust your scope you are actually moving this tube, thus the cross hairs do not move around in your field of view

Sep 19, 2010 | Tasco Target/Varmint 6-24x42mm Rifle Scope...

1 Answer

Parallax


What is out of focus? Your cross hairs or your whole picture? The parallax error is when you shift your head left, right, up, etc, the cross hairs stay on target. sometimes it will move with you and you will be off. But it shouldn't effect your site picture. You should still be able to see down range and the cross hairs should be in focus. Your rear most knob on the scope eyepiece will adjust to your vision. Mainly for the cross hairs though. I hope nothing broke loose in there to make it go out all at once. Hope this helps.

Mar 28, 2010 | Barska Optics Barska 10-40x50 Ao Varmint...

1 Answer

While sighting in rifle with new scope the cross hairs began to roate in the scope. I am using see through mounts. Is it a scope problem or mounting problem


Is the scope moving in the mounts? Going back and forth, left and right? If so, tighten up the screws, Or are the stadia wires themselves spinning around inside the scope? That could be a problem. The wires are fixed in a tube that is mounted at the rear, the front is at the adj screws, they push back and forth on a spring, the whole tube moves, but it is not supposed to spin. You can get to this part easy enough, but go no farther than the cross hairs. Find out what they are supposed to be attached to, or just send the whole thing back and complain. If you break the seal, they will never honor the warranty if there is one. Hope this helps.

Mar 12, 2010 | Vortex Optics Vortex® Crossfire 2.5 -...

2 Answers

Cross hairs turn when adjusting power


Sounds like somebody took your scope apart and forgot something. You can remove the rear of the scope, but you might want to send it back to the factory. Some scopes are filled with nitrogen to stop them from fogging up, But maybe only the front part. Take the eye piece off, you should be able to get to the cross hair unit, it should come out in one piece, find out why it spins, might be missing a washer, I have replaced the cross hairs on scopes before with spider webs, I tried a dolls hair once, I thought it was thin enough, .002 ",, It looked like a rope inside there when I got it back together. Good luck, let us know what happens.

Feb 14, 2010 | Tasco Target/Varmint 6-24x42mm Rifle Scope...

1 Answer

Tuning up a Fujinon Super 80 (used)


yuh,why not try a lag bolt,seems like it couldnt hurt. how much was the scope.maybe the lag bolt will cost more

Dec 17, 2008 | Fujinon Super 80 (25x80 mm)

Not finding what you are looking for?
Fujinon Super 80 (25x80 mm) Logo

Related Topics:

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Optics Experts

Michael Vanidestine
Michael Vanidestine

Level 1 Expert

12 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Duff Howell

Level 3 Expert

403 Answers

Are you a Fuji Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...