Question about Loewe Articos 55 55" Rear Projection Television

1 Answer

Will tun on but no picture??

I turn the TV on the green light appears as if its powering on but I dont get a picture? This has happened before in the past and just simple fiddling with it (turning it off/on, unplugging everything etc...) it fixed but this time I can't get a darn picture! Ive tried all the simple things a non-electronical guy could think of. If I have to get this TV serviced where the heck would I take it since its a Loewe? I live near Sacramento CA...any help would be great

Posted by on

  • Chris Reid May 14, 2007

    Also, further investigation. I took the 2 fan cases off in the back and found only the left one was running when i turned the TV on. When I turn the TV on I can see through one fan casing the deal (no idea what it is) that makes the purplish light in the back of the tv and hear it almost trying to click or get over but it just never happens, and thus no picture? Could this mean a bulb is out? I dunno, just thought id share this additional info incase anyone has ever had this prob. Thanks again.

  • cana1 Jan 06, 2008

    I have exactly the same problem but it goes away after a few hours when it cold down. I sent an e-mail to PanurgyOEM in US (I am from Canada) and I am waiting for feedback. If the lamp was burn-out, why would it start after a few hours ?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

The main problem for this is that your lamp needs replaced. It is an Osram lamp but many manufacturers had these made to slight difference in specs to ensure only they could cash in on the spares.

Posted on Jan 04, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sanyo dp50747


sounds like a mainboard problem

Jan 31, 2013 | Sanyo DP50747 50 in. Plasma TV

1 Answer

Panasonic tv PT50LC13 has no picture red light flashes when i turn it on green light flashes and turns off


This model was recalled by Panasonic-----massive recall. Start by having the lamp examined or tested---that is the place to begin.

Oct 17, 2012 | Panasonic Televison & Video

1 Answer

Turn tv on. green light solid display, no picture or sound


The flashing green light is likely indicative of a self-test failure, indicating the TV has detected some sort of internal fault. With no picture or sound, one strong suspect is the power supply. Flat-panel TV's have an internal DC power supply that converts the inbound AC current, and when these fail, or are unable to supply a minimum level of power to the set, it can behave as you describe, providing only enough power for the green light to illuminate.

Jul 28, 2012 | LG 50PG60UD 50 in. HD-Ready Plasma TV

1 Answer

LG 32" Plasma TV power-on problem


Hello,

Your power supply board is dead, u know basic electronics’ and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.
hope this helps...

Jul 02, 2010 | Panasonic TH-42PWD6UY 42 in. HD-Ready...

1 Answer

Polaroid 4011-tlxb. Power to tv and it was turning from red to green light when you press power button but no picture. Pressing any buttons on tv or remote and nothing was happening. Replaced power supply...


if you replaced the supply board then there is issues with the decoder board as you would need to chec kthat and see if its not the issue.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Sep 22, 2009 | Polaroid TLA-04011C 40 in. LCD TV

1 Answer

Beovision 3 (8803) standby ok - no picture - no sound


if you know how to use soldering iron,try to resolder your tv,especially the jungle,regulator and the horizontal section.if not working, check the output transistor a square black plastic w/ 3 legs at the back of the plyback.

Jul 29, 2009 | Televison & Video

1 Answer

Tv will not turn on


I turn on tv green light comes on and gos off and no picture.

Feb 04, 2009 | RCA D52W19 52" Rear Projection Television

1 Answer

RCA 52" will power on but shuts down immediatley


plz get the picture tube ic's basically when green light mostly appears on the tv it is said that there is a roblem in tv ic's

Feb 28, 2007 | RCA D52W19 52" Rear Projection Television

Not finding what you are looking for?
Loewe Articos 55 55" Rear Projection Television Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Loewe Televison & Video Experts

Brad Brown

Level 3 Expert

17448 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75774 Answers

Are you a Loewe Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...