Question about MPC Computers TransPort T2300 Notebook
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The Transport T2300 has an internal battery that will run the laptop for several minutes after the main battery goes dead. This feature allows you to save your work and shut down safely. If you run the laptop until both batteries are dead, even a brand new battery can't start the unit again. You have to follow this procedure:
1.Unplug power cord
2. Remove any attached periphal components including the cd rom and/or floppy disk module if you have one. Both remove with a push button switch located on the bottom of the unit.
3. Plug in power cord and charge the unit for a minimum of 24 hours straight. 30 hours is better. This whole time will be spent slowly recharging the internal back up battery.
4. Once that is done, unplug power cord again and reinstall any floppy/cd drives. Plug power cord back in now and charge for at least 24 hours again.
If your backup battery is dead, you can't charge the main battery or turn the unit on. The longer you charge, the better. We had one unit here that had to be on the initial battery backup for 72 hours before it finally took hold. Then, one overnight recharge on the regular battery and all was well.
If you need drivers or manuals for the 2300, all are available on cd at email@example.com for around $9.50 including shipping, handling, and owners manual
Posted on Apr 14, 2009
LOOK where your speakers are , just in front there is a cover where your font keys are talk a small screwdriver pull cover off you will see two screws that it put out the keyboard the pull you cable , note reinstall just backward...good luck.....
Posted on Aug 15, 2009
FN is not related to any software it is bacially the direct Key which operates ....in any case check in the device manager for any red X mark or ! mark for malfunction
Posted on Feb 06, 2010
SOURCE: How do i get my
Did you enroll your finger print first?
If not, log onto your account, and start the protector suite
go to the passport section, and set up a passport for your account.
Sorry if this isn't very clear, but I don't have the suite anymore, I'm running windows 7 on my t2300
Posted on Nov 09, 2010
You can get the item needed for your device at ebay.com, it is a convenient place to buy computer and laptop accessories.
Posted on Nov 19, 2010
Tips for a great answer:
Dec 10, 2012 | MPC Computers TransPort T2300 Notebook
Jun 03, 2012 | MPC Computers TransPort T2300 Notebook
Mar 15, 2011 | MPC Computers TransPort T2300 Notebook
Feb 25, 2011 | MPC Computers TransPort T2300 Notebook
Nov 19, 2010 | MPC Computers TransPort T2300 Notebook
Oct 12, 2010 | MPC Computers TransPort T2300 Notebook
Feb 06, 2010 | MPC Computers TransPort T2300 Notebook
Aug 15, 2009 | MPC Computers TransPort T2300 Notebook
33 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: