Question about Panasonic KXDT343 Phone
When I press the button for the desired extension, it says line not assigned
From the idle phone, press PROG the button you want to make an extension, then dial 1+ext and ENTER or STORE. You can keep touching buttons and programming intercoms until you're done.
Posted on Oct 29, 2012
Testimonial: "thank you so much! It worked"
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: programe my phone KX-T7730
The phone you have (KX-T7730) requires a phone system to operate. This phone can be installed on a few different Panasonic phone systems. You need a "programming" manual for the phone system to do what you want (not a user guide) so you will first need to determine which system you have. Look for a part number on the system itself, it should start with "KXT" just like the phone.
Posted on Sep 16, 2007
SOURCE: Line connection
press sp-phone enter *71029, then enter the outside number, then #, you will hear a tone that means call forwarding is activated.
to cancel press sp-phone *7100# or simply dial 790 for extension data clear
Posted on Aug 07, 2008
You have a couple of answers, depending on which phone system the phone is connected to.
Pres PROGRAM and dial 1. If the display says PREF. OUT then dial 1 and press STORE then PROG. You now have no PREFERENCE so you get the intercom by default. You get it back or change it by PROG 12 for idle line, or 13x (1-8) for a specific line.
If you didn't get anything with those numbers, try PROG 19 STORE. Then the AUTO ANS key will step you through the choices. That's used on TDA TDE and TAW boxes.
Posted on Oct 22, 2008
It says "Not Stored" because you haven't stored anything in it. There are 12 buttons on the left side with lights and 12 buttons for feature dialing on the right. If you want to monitor extensions, the buttons on the left are the ones to use. If you want to store speed dial numbers and feature codes use the ones on the right.
Left button programming. Press PROGRAM and the button. For extensions, dial 1+ext and STORE. For CO's, press 0+line number, for inside codes press 2+code, for outside number press 2+9+number, all followed by STORE.
Right button programming. For inside codes dial the code, for outside number press 9+number followed by STORE.
Note that you could also dial "8x" or "80x" in place of "9" for specific line access. Also, you can store extension speed dial numbers on the right, you just won't get a light indication when they're busy.
Posted on Jun 04, 2009
Tips for a great answer:
Dec 18, 2013 | NorStar M7310 Corded Phone
The green lights next to the line or pool buttons show the current Line Ringing settings for all
lines or pools assigned to the extension. (If a line or pool is not assigned to a button, the green
light next to that button is off.) The following ringing options can be shown by the green light
next to the line or pool button:
? Immediate Ring - on steady
? Delayed Ring - flashes slowly
? No Ring - flutters quickly
3) Press the line or pool button until the button light shows the correct setting (the setting for the
currently selected line or pool also appears on the display).
4) Continue programming, or exit programming mode.
For incoming calls, the line selection (hunt sequence) is set by the local service provider). For outgoing calls....again....it depends on the system. For the Partner ACS:
1) Press FEAURE 00, SYSTEM PROG, SYSTEM PROG, CENTRAL PROG at extension 10 or 11.
2) Enter the number of the extension to be programmed for Automatic Line Selection.
3) Press **.
4) Press the line, pool, or INTERCOM buttons in the desired order. The valid entries for Automatic
Line Selection depend upon the type of extension:
? Key Extension: Outside system lines, Left Intercom (the factory setting)
? Pooled Extension: Pool 880 button 1, button 2, Left Intercom, Right Intercom (the factory
setting), Pools 881-883, individual lines
For each button pressed, a display similar to the following appears:
Automatic Line Selection
5) To exit Automatic Line Selection, press **.
6) Press CENTRAL PROG and enter a new extension number, or exit programming mode.
Changing line ringing and line selection are tasks that are normally reserved for the Administrator of the telephone system.
Jan 06, 2011 | Lucent 18D Corded Phone
Assign an Extension Number to Your Phone
1 Press program.
2 Press down arrow until the screen displays EXTENSION NO, then press right arrow.
3 Press the up arrow or the down arrow to select the desired extension number (from 11 to 22).
4 Press save store your selection.
NOTE: If you duplicate an extension number, you will hear a repeating
short ring. Repeat Steps 1-4 and assign a different number (from 11 to 22).
Oct 06, 2010 | AT&T 944 Four Line Intercom Phone
Feb 15, 2010 | AT&T 944 Four Line Intercom Phone
Jan 29, 2010 | AT&T 955 Corded Phone...
Dec 01, 2009 | AT&T Lucent MLS-12D Phone
Aug 31, 2009 | Lucent PARTNER18 Corded Phone
Aug 25, 2009 | Panasonic KX-T7730 Corded Phone
Feb 05, 2009 | Avaya Corded Phone avaparp18d
Jan 09, 2009 | Lucent PARTNER18 Corded Phone
368 people viewed this question
Usually answered in minutes!