Question about Canon imageRUNNER 3300 All-In-One Laser Printer
Hi you need to enter in service mode first
in the control panel press the next secuence:
press adittional function
press 2 and 8 at the same time
press again adittional function
service mode should appear in the screen. if don't repeat the procedure until it does
in service mode press
COPIER, then FUNCTION, then CLEAR
select ERR and press ok
turn off the machine from the main switch for about a minute.
restart the machine and try to make some copies, if problem persist there is a malfunction in the fixing unit. get technical support. i hope this can help you
Posted on May 02, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Error E000001-0000
e001 is a fuser error. it might be able to be reset, but should be looked by a tech.
*28*-press the additional func button, 2&8 at the same time, and the additional func button again.
when you have done it correctly, the screen will change and it will say service mode across the top.
press the done or ok button on the lower right side of the screen.
turn the machine off at the black switch on the right side, wait 10secs, turn back on. should work.
****DONT MESS WITH ANYTHING ELSE IN SERVICE MODE YOU CAN REALLY SCREW UP THE MACHINE.!!!!!!!!!!!!!!!******************
Posted on Apr 23, 2009
SOURCE: I receive an error E000013-0000
Check your toner waste bottle it may be full. Also the tube that transports the wast toner may be clogged. In which case its time to call a tech. John
Posted on Jul 03, 2007
Here's a link for your manual. Good luck. If this helps you plz rate this as 'fixya'. If you need more help leave a comment & I'll be happy to help. Thank you kindly.
Posted on Mar 06, 2009
SOURCE: error code E000019-0000
Hi this is only indicating a dirty waste toner bottle neck.
It is easy to solve.
Take a star screwdriver,remove the one screw of the left lower panel.You will find the panel at the left-lower side of the machine,the side were you have to open to remove paper jams on the fixing side of the machine.
After removing that panel,remove the bottle remove the toner inside the bottle clean the NECK of the bottle inside and outside and put the bottle back in it's place.Put the panel back and switch machine on and off.
THIS WORKS ALWAYS
Posted on Mar 10, 2009
Could try MMI clear to reset user settings to factory default. In Service Mode go to Copier > Function > Clear > MMI
Then press ok.
To get into Service Mode Additional Functions (has * on it) > 2, 8 > Additional Functions.
Posted on Jul 26, 2009
Tips for a great answer:
Aug 27, 2016 | Canon Ir 3300 Black & White Copier
Feb 11, 2015 | Canon 2 Ir3300 Ir3300i B/w Copier/ Network...
Nov 22, 2014 | Canon 2 Ir3300 Ir3300i B/w Copier/ Network...
Sep 02, 2014 | Canon 2 Ir3300 Ir3300i B/w Copier/ Network...
Your Canon copier ir3300 shows front cover open, but actually it is not. It could be the sensor problem, try with this Power off the printer then unplug the printer's power cord, wait 5 seconds then replug the power cord in. Hold the Power button for 6 Beeps and release the Power Button. This will reset the printer and should resolve your problem.
Mar 26, 2011 | Canon imageRUNNER 3300 All-In-One Laser...
Jul 30, 2008 | Office Equipment & Supplies
3,995 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: