Question about Lexmark E260dn Laser Printer

Open Question

How to print out Lexmark E360dn config page - Lexmark E260dn Laser Printer

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

webmaster21
  • 803 Answers

SOURCE: how do I print config pages for Lexmark T630,

1 Make sure the printer is on.
2 Press Menu until you see Utilities Menu, and then press Select.
3 Press Menu until you see Print Menus, and then press Select to
print the page. The message Printing Menus appears on the
display.
4 Verify that the options you installed are correctly listed under
“Installed Features.”
If an option you installed is not listed, turn the printer off, unplug
the power cord, and reinstall the option. See Step 3: “Install
memory and option cards” on page 30 for more information.
5 Verify the amount of memory installed is correctly listed under
“Printer Information.”
6 Verify that the trays are configured for the sizes and types of
print media you loaded.

or

1 Make sure the printer is on.
2 Press Menu until you see Utilities Menu, and then press Select.
3 Press Menu until you see Print Net Setup, and then press
Select to print the page.
4 Check the first section on the network setup page and confirm
that Status is “Connected.”
If Status is “Not Connected,” your LAN drop may not be active
or your network cable may be malfunctioning. Consult your
network administrator for a solution. Afterward, print another
network setup page to verify connection to your network.

or

1 Launch the CD.
2 Click Quick Reference.
3 Print the documents.
The same Quick Reference pages are stored in the printer. To print
them:
1 Make sure the printer is on.
2 Press Menu until you see Help Menu, and then press Select.
3 When you see Quick Reference, press Select.

Posted on Sep 25, 2009

printmastert
  • 3344 Answers

Creating Customers For Life

    Verified Fixya Pro

    SOURCE: message on screen replace pc kit but everything

    If you have just replaced the pc (photoconductor) kit, you also need to reset the pc (photoconductor) counter. Here's the link for instructions on how to reset the page count: http://bit.ly/agYtVo . Or simply press and hold the CANCEL button while the printer is on and the front cover open until all lights are flashing. Hope this helps. If you need more assistance, leave a comment and I'll get back to it. Thanks.

    Posted on Jun 23, 2010

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    How do we correct a 900.57 firmware error. What does this mean and how do we get printer to print?


    Windows 7 is the operating system on your computer. Firmware is the operating system on your printer. You need to update the firmware on the printer.
    Firmware update instructions:

    1. Download the appropriate update file below
    2. Unzip the downloaded file
    3. Read the README file (located in .zip file) before updating

    support lexmark com

    Nov 22, 2014 | Lexmark E360DN LASER PRINTER N Laser...

    1 Answer

    How will I know when the photoconductor is not working on a Lexmark E360dn


    Either the printer will stop and not work until you replace it or the print quality will degrade to the point where you get frustrated and replace it.

    Sep 15, 2014 | Lexmark E 360dn - printer - B/W - laser

    1 Answer

    Printer has error that says - "900.00 Firmware Error"?


    It's a non-specific error, probably does not like what you are trying to print.
    There's a page on it here:

    support lexmark com

    Jun 26, 2014 | Lexmark E360DN BUNDLE - QTY 4 - LMB OFFER...

    1 Answer

    PC life warning on Lexmark e360dn


    You need to change the photo conducter... its the 2nd tray that pulls out under the toner cartridge I think its a green handle same as toner

    Jul 27, 2012 | Lexmark E360DN LASER PRINTER N Laser...

    2 Answers

    I need a Lexmark E360dn manual. I replaced the pc kit but the warning message still indicates a problem.


    You need to do a Photoconductor RESET:

    Turn off printer, press and hold the CHECK MARK and LEFT ARROW buttons down, while turning on printer.

    Hold them down until you see the little dots go all across the display.

    That should take you into the service mode. The first thing you see should be RESET PC, press CHECK MARK and it should reset, then press the left arrow button until you get to exit.

    Sep 20, 2011 | Lexmark E360DN LASER PRINTER N Laser...

    1 Answer

    I replaced the PC kit (have done this many other times) but the Warning message still indicates "Replace PC kit" and my copies are not clear. Don't know what to do.


    You need to do a Photoconductor Reset

    To do that, turn off printer.

    Press and hold down CHECK MARK and RIGHT ARROW, while turning on printer

    Keep holding down until you see the CONFIG MENU, if you see READY, do it again.

    The first option will be Reset PC cnt, press CHECK MARK.

    After it resets, press LEFT ARROW button, this takes you to exit. Press CHECK MARK.
    Printer will restart and your error should be cleared.

    Sep 20, 2011 | Lexmark E360DN LASER PRINTER N Laser...

    1 Answer

    Message on screen replace pc kit but everything works fine. Lexmark E360DN


    If you have just replaced the pc (photoconductor) kit, you also need to reset the pc (photoconductor) counter. Here's the link for instructions on how to reset the page count: http://bit.ly/agYtVo . Or simply press and hold the CANCEL button while the printer is on and the front cover open until all lights are flashing. Hope this helps. If you need more assistance, leave a comment and I'll get back to it. Thanks.

    Jun 23, 2010 | Lexmark E330 Laser Printer

    Not finding what you are looking for?
    Lexmark E260dn Laser Printer Logo

    Related Topics:

    926 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Lexmark Office Equipment & Supplies Experts

    Roopesh S
    Roopesh S

    Level 2 Expert

    228 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18389 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...