Question about Lanzar (STDIN70) Car Video Player

1 Answer

Cannot align the touch screen

When i tap on any of the on screen buttons, it registers as me tapping somewhere else, i tried to realign the screen. i can align the top two corners but as i go to touch the bottom right it constantly says to point again and no matter where i touch on the screen it satys point again. how can i realign the screen so it functions properly.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 883 Answers
Re: cannot align the touch screen

Look for a tiny pinhole and insert a pin while powered up to reset the device

Posted on May 27, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Don't know how set up the navigation systen AVIC-X910BT

use a stylus or your fingernail when tapping the screen.

Apr 08, 2013 | Car Video Players

1 Answer

The touch screen if slightly off when you touch the screen. You would have to touch to the left of the button.

see if there is a "calibration setting" on the radio through a settings menu so you can reset the alignment on your screen

Jul 26, 2009 | Pioneer AVH-P5700DVD Car DVD Player

1 Answer

Touch points off

Hi, if you go to and search the forum. There are full instructions there to show you how to re-calibrate your touchscreen. I learned from them and did my a while back, but I forgot how. I am sure it still there. You just have to look at the whole forum on the Avic N series. Good luck.

Jan 03, 2009 | Pioneer AVIC-N2 Car DVD Player

1 Answer

Touch screen is out of alignment

sounds like the display has taken a hard hit or alot of shakin!! you might have to send the unit off to be realigned

Dec 07, 2008 | Pioneer AVH-P5700DVD Car DVD Player

1 Answer

Some buttons don't work

Pioneer AVIC-D1 Touch Screen Recalibration

If your pioneer AVIC car navigation unit does not register your touches or the wrong button is “pressed”, you need to re-calibrate your screen’s digitizer.

1-Hold the Eject button down until the face of the unit drops all the way
2-Using a pen hold down the reset button (just above the joystick) and the navigation disc eject simultaneously.
3-Release the reset button.
4-Release the dvd eject button next. The display will read “press reset”
5-Push the joystick up two times.
6-Push the joystick down twice.
7-Press the joystick in.
8-The service menu will appear after a short pause. You can navigate the service menu using the joystick.
9-Chose the first menu option and press in on the joystick.
10-Trace the screen with a stylus.
11-"P.ADJ" is the back button
12-Chose the second menu item in order to calibrate the touch screen. Use a stylus again and tap the "+" sign on the screen. (You may have to touch slightly off center if the digitizer is damaged. In which case things will still be off but it will be much better.)

Jul 27, 2008 | Pioneer AVIC-D2 In-dash Car Audio Stereo...

1 Answer

Cd won't eject

After you hit the button...and it beeps....tap on the screen...where the color display is....not too soft but not so hard that you crack it....then it should open after a few times of tapping it and hitting the button. I found this at another forum, and it worked for me.

Jun 10, 2008 | Pioneer AVH-P6600DVD Car DVD Player

9 Answers


turn on the player, start the radio option, go into the setup menu, tap the language tab, ON THE REMOTE press "stop, stop, 5,4,3,2,1" This will bring up the secret menu, you do not need to connect the pink wire

Mar 10, 2008 | Audiovox VM9512 Car DVD Player

1 Answer

Bottom row of touch screen won't work

may have a sollution for ya. i cant spell. try to reset the alignment on the screen. i had the same problem once and somewhere in settings you can RESET the screen alignment. good luck

Dec 29, 2007 | Alpine IVA-D300 Car DVD Player

7 Answers

Avic-N1 touch screen calibration...

1. Take disc out. 2. Press and hold eject and push the reset button. (don't release the eject button 'till screen closes and opens again. 3. Sceen will ask you to push reset.(don't) 4. With right knob... up,up,down,down,push 5. Perform steeps 1,2,3,and 4 only: The first outlines the screen The second has you push hash marks The third verifys The fourth Saves 6. Use "Band" buton for "back" 7. Press reset Be carefull......

Aug 07, 2007 | Pioneer AVIC-N1 Car DVD Player

Not finding what you are looking for?
Car Video Players Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lanzar Car Video Players Experts

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

The Knight
The Knight

Level 3 Expert

66638 Answers

Doug Adams
Doug Adams

Level 3 Expert

642 Answers

Are you a Lanzar Car Video Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides