Question about Canon PIXMA MP250 Inkjet Multifunction Printer - Color - Photo Print - Desktop

Open Question

The yellow alar and the display on the led is letter P and number 7 what is that... and the cartridge is not moving when i on the prnter

My printer is canon PIXMA MP258

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

old marine
  • 1923 Answers

SOURCE: installing new ink cartridge, canon pixma 1600

Go here. Type "how to install ink" in the search box. Click "Search", then select "How do I install the ink cartridge(s)". You will get instructions with pictures on how to prepare and install the cartridges.

Posted on Apr 17, 2008

  • 1 Answer

SOURCE: canon pixma ip1300 initialisation problem

service error 5100 on canon pixma ip1300

Posted on Sep 01, 2008

  • 1 Answer

SOURCE: I need a tool to reset my canon pixma iP4600 ink cartridges

I found the only tool I have seen at this url. http://www.patronenhandel.de/shop/index.php/cat/c13943_Canon-Chipresetter.html It is a German company, but I was able to order the resetter from them with no problems. It has worked very well, but was a little expensive. part of the problem was that the US dollar and Euro were not at a favorable exchange rate when I ordered. I didn't get any answers to my emails to them, but when I used there site to order, it took about a week to get the device. It is very simple to use.

Posted on Jun 14, 2009

antking
  • 51 Answers

SOURCE: Canon PIXMA MP145

E27 means waste ink absorbed is full need to clear out but you still can't print because only 80% or 70% are full.try this method to solve you problem.

Resetting Printer Canon MP140, MP160, MP180, MP210, MP220, MP460, MP470, MP500, MP510, MP530, MP600, MP610, MP800, MP820, MP810, MP830, MP960, MP970 procedure:

•Turn off the canon printer
•Hold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green.
•Hold the Power Button, release the Resume Button.•Not releasing the Power Button, double click “Resume” and release Both Buttons.after that wait the green flash will become light on then.
•Click “Resume” for Four times
•Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.

if this ok so u can print or can't. i still suggestion you bring you printer to computer shop for clear out inside spam printer.

Posted on Sep 01, 2009

  • 2427 Answers

SOURCE: printer canon pixma IP1000 does not work on windows 7 64-bit

here are the windows 7 64 bt drivers

http://software.canon-europe.com/software/0035868_0010104.asp?model=

click aomwin110ea24.exetriangle_right_gray.gif
4070.33 Kb. under the software label to the buttom if the page

Posted on Mar 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

EPSON L200 PRINTING BUT BLANK RESULT


take out your cartridges and check you have remove yellow tape over the air hole, if you don't remove this printer won't print.
Ensure the cartridge numbers are correct, all epson cartriges look the same but the green chips are different so they are not interchangableThe cartriges should fit into the holder with a click, if they are not pushed home fully the ink wont flow.

Jan 15, 2014 | Epson L200 All-in-One Inkjet Printer 27...

1 Answer

Canon MP700 Multifunction printer displays message "Wrong cartridge"


1. With the printer powered off but connected to a power source, press the Power button while

pressing and holding the Stop/ Reset button.
2. When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3. When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
4. When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in. (orange and green, starting with orange.)

Mar 24, 2012 | Canon MultiPASS MP700 All-In-One InkJet...

1 Answer

1. Replaced Color and Black ink cartidges on my HP D5160: Color cartridge - NEW Black cartridge - REFILL SYMPTOMS> Red flashing exclaimation LED, black ink cartridge appears empty (0 dots in the...


Black printer ink in HP Printer may fail to be recognized by the printer. Most times an error message will be sent indicating that something is wrong with the black print cartridge. Sometimes the printer may accept to print with the black ink, but the printouts may have horizontal lines and very illegible letters. In such a case a manual cleaning of the print head should be carried out. In doing the manual cleaning, one should spray Windex heavily on paper towel and wipe off the surface of the print head.

http://en.kioskea.net/forum/affich-40171-printer-not-printing-black

Oct 26, 2010 | HP Photosmart D5160 InkJet Printer

1 Answer

I have canon mp145 printer when power on the error e5 display what is the problem, how to solve.


Hi.. E5 means the cartridge is not installed or the cartridge is not recognized. Here are some possible solutions that will work on your printer.

First step
1. Remove the cartridge and clean the copper surface contact by a moistened cloth. Then return back the cartridge properly, you will hear a snapping sound to tell you its properly seated.

Reset the Printer to clear the error. This is done after refilling the cartridge with ink.
1. Disconnect the printer's power outlet.
2. Press and Hold Power button while connecting the power outlet back.
3. While holding the Power button, Press the Reset button twice (red circle with inverted triangle)
4. Release the power button.. wait until the printer shown number 0
5. Press + to change the value from 0 to 1.
6. when this value is 1, press the color button; this will light up two leds, one is for plain paper and the another for photo paper . at this point is feed the printer with paper.
7. Press the Power button
8. Press the Color button
9. Press the Reset button. The canon will print some stripped lines and some numbers and letters (all black if colored ink is empty). When you print this sheet the value in the display returns to zero.
10. Open the printer cover (not the scanner cover) and remove the cartridges.
11. With the printer stll open, disconnect the power outlet.
12. Close the lid
13. Re-connect the printer to the power outlet and turn on the printer.
14. Open the lid, return the cartridge and wait for the printer until it fully initialize.
Try printing again.

IF another error appears, do this reset.
1. While the errors appear in your printer...Press and Hold the Reset button (red circle with inverted triangle) and wait until it self restart.
2. Release the Reset button when the printer restart.

Take note of this as you will use this everytime you refill the canon cartridge.
Please comeback and rate this answer.
Thank you for using Fixya.

Aug 18, 2010 | Office Equipment & Supplies

1 Answer

Printers do not recognize yellow cartridges


http://www.fixya.com/support/r3845491-ink_cartridge

Check out there FIRST befoe you get into things too deeply

A lot of common tips that tend to help a lot of people.

Bob

Jul 22, 2010 | Epson Stylus Pro 9600 InkJet Printer

1 Answer

Toner sensor error


Hi


This error comes up when the printer detects that the toner of particular color is missing. This indicated that the indicated color toner is missing from the printer(eg-- C = Cyan, Y = Yellow, M = Magenta, K = Black).

C5150 may face a toner sensor error after installing used sets of toner cartridges and sometimes even after installing new toner cartridges as well. This error can be bypassed. This can be disabled by following these steps---

1. Turn machine on while pushing and holding the (+/-), menu buttons at same time.
2. Menu window will show OKI USER.
3. Scroll to Engine Dialog Mode is indicated Push Enter button.
4. Diagnostic Mode xx xx xx S Mode is indicated.
5. ( = 2 ) . Press (- or +) button until “ENGINE - PARAMETER SET =2” is displayed.
6. Push Enter button.
7. TONER SENSOR - ENABLE is displayed.
8. Push Enter button.
9. Press (- / +) TONER SENSOR = DISABLE is displayed.
10. Press ON LINE CANCEL buttons at same time.
11. (*) is displayed.
12. Restart the Printer.

Daniel Scott

Jun 22, 2010 | OKI C5150n Led Printer

1 Answer

How exchange cartridge for Epson C1100


Make sure that Ready or Sleep is displayed in the LCD panel.
Select Change Toner X (The letters C, M, Y, or K appear in place of X, indicating the colors Cyan, Magenta, Yellow, and Black.) in the Reset Menu on the control panel.While the cartridge X you selected above moves to the cartridge replacement position, Please Wait appears on the LCD panel.Replace Toner X appears in the LCD panel when the cartridge to be replaced reaches the cartridge replacement position.Then Open Cover A.Push up the right lever to unlock the toner cartridge. Then remove the toner cartridge from the printer.

May 15, 2010 | Epson Aculaser C1100 Printer

1 Answer

Printer says low level color ink fitted new ink printed ok at first but still said low ink order now and will not let me print or scan


Dear customer,
The most common solution is to follow the steps as follows
1. unplug the power cord
2. press and hold down the <ON/OFF> button and reconnect the power cord
3. press the <STOP/RESET> button 2 times and then release the <ON/OFF> button
4. Display LED show "0" press the <+> button 1 time Display LED show "1"
5. press the <Start Color > button 2 times and then press the <ON/OFF> button waitng for testing out 2 pages
6. Open the cover. The carriage that holds the ink will move to the left hand side. and then unplug the power to the printer
7. Push down on the end of the black cartridge. A clicking noise will be heard.
8. Slide the cartridge out of the holder towards you.
9. Push down on the end of the color cartridge. A clicking noise will be heard.
10. Slide the cartridge out of the holder towards you.
11. Once both cartridges are removed, unplug the power to the printer (without turning it off).
12. Reconnect the power cord.
13. Turn on the printer.
14. Open the cover. The carriage that holds the ink will move to the left hand side.
15. Place the black cartridge in the bottom of the printer.
16. Slide the black cartridge back until is cannot go back any further.
17. Push up on the end of the black cartridge, a clicking noise should
be heard.
18. Place the color cartridge in the bottom of the printer.
19 Slide the color cartridge back until is cannot go back any further.
20. Push up on the end of the color cartridge, a clicking noise should
be heard.

hope its udeful. thank you.

Jul 09, 2008 | Office Equipment & Supplies

1 Answer

Incorrect Cartridge


Hi,

As you mentioned you have already done a reset on the printer , may i know how u have done it ? In case u did a power reset like > turning off the printer and turning it on , you can also try the following steps as well .

1
Take out the cartridges from the unit .
2
Make sure the unit is connected to the wall jack directly without any surge protector.
3
Unplug the power cord from the back of the unit ( without turning off the unit ) .
4
Now press the # and 6 key together , while holding these keys down plug in the power cord back into the unit .
5
Do not release the keys after a few seconds u will find te hp logo or bars moving across the screen .wait while the unit turns off.
6
after one minute turn on the prnter . it will go into alligment phase > let it finish .
7
after its done > try to make a copy

thanks

Apr 22, 2008 | HP OfficeJet 7310 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA MP250 Inkjet Multifunction Printer - Color - Photo Print - Desktop Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1923 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...