Question about Eureka Luxury Family 8-Person 2-Room Titan Tent

1 Answer

Changing the belt

How do i change the belt on my eureka altima upright vacum?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 148 Answers

Flip over

remove 3 phillips head screws and remove cover

pull agitator roller out of groove opposite end of drive belt area

install new belt by putting loop around silver drive shaft then putting over belt roller
put roller in appropriate grooves( belt will feel stiff make sure belt stays on roller and under drive shaft put cover back on

You are ready to go!






Posted on Jan 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking for a repair manual, for free, for a eureka vacuum model 4351---having an issue with the belt and a clog


Contact Ozark Vacuum in Rolla, MO. Don't know if a repair manual, per se, is available or will be free but their knowledge should be able to help with your issue.

Apr 06, 2011 | Eureka Luxury Family 8-Person 2-Room Titan...

1 Answer

9140


if u dont kno how to change a belt then get a life

May 26, 2010 | Eureka Luxury Family 8-Person 2-Room Titan...

1 Answer

How do I change the belt on a Eureka Victory model 4335 b? I have the belt.


You need a phillips screwdriver. Undo the two screws, either side of the height adjustment dial. Lift off the cover. Now you should be able to see instructions and the old belt..

Remove the brush roll..put the new belt in place around drive pulley and brush roll pulley.. reinsert left end of brush roll first then pull to stretch the belted end back into it's place.

Replace cover.

Mar 08, 2010 | Eureka Luxury Family 8-Person 2-Room Titan...

1 Answer

Eureka Solutions for handicap accessible


eureka doesent make tents specific to handicap vans, im not sure many companies do

Sep 30, 2009 | Eureka Luxury Family 8-Person 2-Room Titan...

2 Answers

My Eureka won't pick up. I've checked the belsts


If this is a central vac with a hard plastic dirt reservoir, check the reservoir mounting gasket. If it leaks and sucks air, you won't get any pickup.

Sep 13, 2009 | Eureka Luxury Family 8-Person 2-Room Titan...

1 Answer

Please e-mail instructions for use of Eureka dream machine Model #2440, Serial #9635083127 carpet shampooer.


I cannot email you intructions but is you call Eureka at 1800-282-2886 they can mail you a copy

Jul 14, 2009 | Eureka Luxury Family 8-Person 2-Room Titan...

1 Answer

I have a Eureka Whirlwind big cup bagless. How do I remove bottom


I had to lay the sweeper down as if I were going to sweep under a bed then on the top of the sweeper on either side is a screw, Mine had dirt in there so I didn't see them. Unscrew but don't remove the screws and then lift the cover off. You can down load a manual for free at the Eureka site http://www.eureka.com/customer-service

Jun 11, 2009 | Eureka Luxury Family 8-Person 2-Room Titan...

1 Answer

How do I change belt on Eureka Capture


lay your vacuum completely on its back on the floor, like you are going to vacuum under a bed, then turn it over on its "belly", you should be able to see the bottom of the unit, where there are 2 small wheels ..... look where embedded in the plastic are #'s 1-4 there are 4 screw pockets, 2 in front and 2 in rear, those are deep, so you need a phillips screwdriver with a long skinny barrel to get in the deep pocket.remove those 4 screws, stand the unit upright, then grasp both sides of the "hood" of the unit remove the the plastic cover, you should see the belt on the right side as you face the vacuum. If the belt is broken, just pull up on the brushroll , removing it from the base. Clean any hair,thread, etc.. from the brushes, and ends , place new belt over the motor shaft (looks like a nail sticking out toward the back of the belt area) slide the brushroll through the other loop of belt in the belt groove, then slide the stop sign shaped end pieces in the grooves in base , pressing down until it is seated in place, gently turn the brushroll with fingers watching the belt making sure it is staying straight , then place the hood of vacuum back in place, make sure it fits correctly, recline handle again all the way down, roll vacuum over again to place screws back in bottom of unit.

Jan 11, 2009 | Eureka Luxury Family 8-Person 2-Room Titan...

Not finding what you are looking for?
Eureka Luxury Family 8-Person 2-Room Titan Tent Logo

Related Topics:

381 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eureka Sport & Outdoor Experts

yadayada
yadayada

Level 3 Expert

61289 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

kakima

Level 3 Expert

96731 Answers

Are you an Eureka Sport and Outdoor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...