Question about Apple iPod nano 4th Generation

1 Answer

Ipod nano chromatic reads error? will not turn on? Nano; 4th Gen;16Gig; When you attach the nano, to the USB port it shows up as a Mass storage unit; transfer music to I tunes and hit the sync button and the ; Mass Storage unit disappears, off of listing and after a while you get an error message. "UNKNOWN FAULT ERROR (-50)" Please help!!!!

Posted by on

  • Anonymous Jan 11, 2009

    Same type of problem happens to me too. A message pops up in the toolbar, something about a malfunctioned device.








  • hehehahahoho Feb 21, 2009

    yer, my ipod nanochromatic 4th generation 16G wont turn on at all. i havn't connected it to the computer yet, but it had full battery this morning and an hour ago it was working, i switched it off for mayby 15 minutes and i've just tried to switch it on and it won't turn on!
    also when i turn it sideways it won't go through the albums, the screen freezes!
    HELP!!!!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 92 Answers

Hi All,

try this out

  1. Disconnect the iPod from the computer and close iTunes.
  2. Highlight all of the following 10 lines of text that begin with regsvr32 and then choose Copy from the Edit menu of your web browser: regsvr32 /s softpub.dll
    regsvr32 /s wintrust.dll
    regsvr32 /s dssenh.dll
    regsvr32 /s rsaenh.dll
    regsvr32 /s gpkcsp.dll
    regsvr32 /s sccbase.dll
    regsvr32 /s slbcsp.dll
    regsvr32 /s mssip32.dll
    regsvr32 /s cryptdlg.dll
    regsvr32 /s initpki.dll

  3. Open the Notepad program by navigating to:
    Start > All Programs > Accessories > Notepad
  4. In Notepad, choose Paste from the Edit menu. Note: make sure that the text that appears in Notepad is the same as what is shown above.
  5. From the File menu, choose Save As.
  6. In the File name: field type appleipod.bat and save the file to the Desktop.
  7. Close Notepad and locate the appleipod.bat file. It should appear on the Desktop with the icon shown below: ipod nano chromatic reads error? - ts1539_1.jpg
  8. Double-click the file and you will see a black window appear on the screen for about a minute. Wait until the window automatically disappears and proceed to the next step.
  9. The appleipod.bat file can be deleted at this time.
  10. Open iTunes and connect the iPod.
  11. When the iPod appears in iTunes, restore the iPod and resync your content.

Posted on Feb 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I use JVC AVX810 with Iphone? Currently IPOD works fine with the USB cable but IPHONE is not recognised. Maybe there is an adaptor that can solve it?


JVC KS-PD100 iPod Interface Adapter (257KSPD100, sold separately). This optional iPod Interface Adapter supports audio playback for the following iPod models - iPod click-wheel (3rd gen), iPod photo (4th gen), iPod mini (1st/2nd gen), iPod nano (1st/2nd/3rd/4th gen), iPod video (5th gen), and iPod classic (80/120/160GB). The KS-PD100 is not compatible with the iPod touch (1st/2nd/3rd gen), iPod nano (5th gen), or iPhone (2G/3G/3GS). This iPod interface will also not charge the iPod nano (4th generation). *Apple firmware updates may change functionality results.

There u go.....

Jan 29, 2010 | JVC KW-AVX810 Car DVD Player

1 Answer

Won't download music from computer to i pod nano 4th gen


is ur i tunes able to detect ur ipod ... else try connecting using a different usb port ..............

Jan 03, 2010 | Apple iPod nano

1 Answer

Don't know how to reject the ipod nano when charging at computer


  1. Once the iPod is attached to the iPod and USB port in the computer, an icon will appear at the bottom of the computer desktop. The icon is from removing the USB Mass Storage Device
  2. Now, click on the enject icon and it will show which drive the USB cord is attached to. Once the icon is clicked on, the iPod will show an arrow going down and reading "OK to disconnect". Once able to disconnect, the USB cord can be removed from iPod.
  3. Another way to eject the iPod from USB cord is through iTunes. Once anything you want sync'd to your iPod is complete, a message will appear on the iPod reading, "OK to disconnect". Just like it did on the ejecting icon on your desktop.

Sep 24, 2009 | Apple iPod nano

1 Answer

Hi I've bought the new 5th gen ipod nano and


its impossile. you can only upload songs and games onto the ipod. sorry.

Sep 23, 2009 | Audio Players & Recorders

1 Answer

Ipod 4th gen showing music on pc but not on ipod


From the apple website:

"If you are experiencing these errors, begin by updating to the latest version of iTunes. When you have the current version of iTunes, try the following:
  • Disconnect and reconnect your iPod and then attempt to restore.
  • Restart your computer and then attempt to restore your iPod.
  • Disable or Enable Disk Use on your iPod and then attempt to restore.
  • Try connecting your iPod to a different USB port and then attempt to restore.
  • Remove any third-party USB devices you have connected to your computer (it is not necessary to remove your keyboard or mouse).
  • If you use Windows, re-register .dll files as described in article iTunes displays -50 error message when syncing iPod on Windows XP
  • For Windows users, update or reinstall your Windows USB drivers."

If this doesn't fix it, it might be a logic board issue or hard drive issue.

http://repair-scratched-ipods.blogspot.com

www.huskyipodrepair.com

Sep 10, 2009 | Apple iPod nano

2 Answers

New Ipod Nano 4th Gen 16GB has went blank and will not turn on


HI there,

worst case scenario is that a circuit has broken inside. But your ipod will be under warrenty for a year from purchase.

Otherwise, leave the ipod to charge for a long time. Just leave it connected directly to the computer USB port despite not having any change in appearance. Also, don't connect it via a usb hub or through your keyboard. You will need to plug it into your computer directly.

You can also try entering DFU mode. Here is a great step by step guide to do that. http://iphonefreakz.com/beginners-guide/howto-dfu-mode/

Then restore the ipod and update the firmware. Make sure you have the latest version of itunes installed. By checking through software update.


I hope this helps,

Nathan.

Apr 14, 2009 | Apple iPod nano 4th Generation

1 Answer

Ipod nano plugged in but only showing up as USB storage device


Yes you have to Itunes srry :(. But there is a way that you can plug the ipod into different computers just put the ipod in manual mode and that should work.

Jan 08, 2009 | Apple iPod nano

1 Answer

IPOD 8gig 4th gen will not charge via USB


hi :) it might be your software for you ipod. try to get the latest software for your ipod :) hope it helps :)

Jan 05, 2009 | Apple iPod nano

2 Answers

Compatability with 4th gen nano


I have had exactly the same problem having bought a JBL Radial Micro for my partner for Xmas for use with the Ipod Nano, i contacted JBL via their website and was advised to contact Harmen on 01707278100. I was advised that the new ipod nano (chromatic) would not charge on the JBL radial micro. They stated that this was due to Apple changing the charging pin in the new nano. I have since bought a JBL Stage III. I contacted Harmen before buying this and was advised that the Stage II would not work. Hope that this is of use.

Sep 26, 2008 | JBL (JBLRADIALWHT) Speaker System, Docking...

Not finding what you are looking for?
Apple iPod nano 4th Generation Logo

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple Audio Players & Recorders Experts

Sean Cole
Sean Cole

Level 2 Expert

250 Answers

kakima

Level 3 Expert

102366 Answers

TO Lady

Level 3 Expert

638 Answers

Are you an Apple Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...