Question about Husqvarna 22 Hp 46" Deck Yard Tractor

1 Answer

I have replaced the mower belt on my husqvarna lawn tractor but the belt is too tight and the blades are engaged all the time. I cannot find a tension adjustor, is there some way of adjusting as I suspect the old belt had stretched and the deck has been adjusted during services to take up slack. Now I have put on a new belt as per manufacturers recommendations it is too tight . Any ideas pls?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

  • Expert
  • 100 Answers

There should be a adjuster on the spring

Posted on Oct 27, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dgjtex
  • 405 Answers

SOURCE: I NEED BELT DIAGRAM FOR MY HUSQVARNA RIDING MOWER

http://www.usa.husqvarna.com/home.aspx try this out for your answers, I hope this helps you. MERRY CHRISTMAS!

Posted on Dec 23, 2008

lester482529
  • 226 Answers

SOURCE: Knocking in mower deck or belt clutch when engaging blades, motor bogs / slows down

YOU MAY HAVE A BENT BLADE OR EXESSEIVE BUILD UP UNDER THE DECK

Posted on Jun 01, 2009

  • 376 Answers

SOURCE: knob on lawn tractor for blade engagement

Sounds like you need a new PTO switch.

Posted on Jun 15, 2009

  • 3911 Answers

SOURCE: i cant replace the deck belt on my husqvarna ct151 lawn mower

The manual shows how the belts are put on, if you do not have one they may be purchased through dealers or small engine repair shops or online. On mine there is also a little diagram on the top of the mower deck. Another way to check is find an identical one that is functional and look at its belt. There are only so many ways it could fit and these are all made by just one or two manufacturers so there is not much variance.

Posted on Jun 01, 2010

  • 1 Answer

SOURCE: Blades will not engage on Husqvarna riding mower.

I have a Husqvarna GTH2548 and the blades will not engage. It is free from all debrie

Posted on Sep 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 52" Husqvarna LGT 2654 riding lawn mower and when I engage the blades, the belt does not turn the pulley system. What could be causing this, the pulley idlers, or the belt?


depending on the age of the machine, there could be several possibilities
1-- belts are not tight enough--- belt tension system is not correct, wrong length belts
2--bearings for the shafts for the blades are rusted up and seized - preventing the blades from moving--- switch the machine off , disengage the belt drive and see if you can turn the blades by hand
3--- if you have an electric pto system to drive the belts to the blades then that system is not getting full power to engage the PTO or the clutch is not working--worn facings
take it to a service dealer and have a proper diagnosis done

May 09, 2016 | Husqvarna Garden

1 Answer

BY pass red blade engage of quick check for a 2013


Are you sitting in the seat? Usually you can't engage blades if you're not in the seat.

Jul 28, 2014 | Husqvarna 46" Zero Turn Lawn Mower...

1 Answer

Stalls When engaging the blade clutch


Check that the blade brake is disengaging. Slip belt off blade spindles and check that they spin freely. Check underside of deck for clogged grass, ropes, wire, etc.

May 07, 2012 | Husqvarna Riding Lawn Mower Yth24v48ls 48...

1 Answer

The blades will no longer engage on my Husqvarna 1842 lawn tractor....all the belts seem to be in good condition. Any ideas on what the problem is?


Start by making sure the belts are actually on the pulleys and the tension pulley that engages when you go to engage the blades is functioning properly.

Nov 19, 2011 | Husqvarna Garden

1 Answer

Ihave a yth2448 husqvarna lawn motor. mower stall out as soon as i engage it. i have noticethe battery is discharging even when mower is not engage. any suggestion. i justv replaced the starter and...


check the belt as it bound, if you do not think so then take it off(the belt) and engage the PTO if it does not die then it is: the belt, pulley, or blades are/is the reason why it is stalling Tim

May 29, 2011 | Husqvarna Lawn Tractor 48" Deck, 23 Hp,...

1 Answer

I have a husqvarna riding mower that when i engage the blades the engine stops running


Could be something jamming a blade or belt. With the engine OFF and the key OUT make sure the blades and belts all move freely by hand. Clear out all grass and c**p from the blade and belt areas. You may have to remove the blade deck to do this - instructions are in your manual or download a manual from the Husqvarna website. Good Luck!

Sep 07, 2010 | Husqvarna Lawn Tractor 48" Deck, 23 Hp,...

1 Answer

When engaging the blade for my Husqvarna riding mower, nothing happens. I recently had the mandrel assembly replaced for the left blade, and this is the first time I've tried to start it up.


It's possible the repair folks didn't properly reinstall the mower deck belt. Check that it's in place, and under good tension. If that's OK, look at the wires to the mower engagement switch (PTO switch) and make sure the connections are on tight. Then check the motor pulley where the PTO clutch is, making sure those wires still in place.

Jun 10, 2010 | Husqvarna 165HP 42" Lawn Tractor

2 Answers

Blades will not engage on Husqvarna riding mower.


Could be a broken belt, loose belt (stretched) or something is under the mower deck jamming the blades. (stick for an example)

Apr 14, 2010 | Husqvarna Lawn Tractor 48" Deck, 23 Hp,...

Not finding what you are looking for?
Husqvarna 22 Hp 46" Deck Yard Tractor Logo

515 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Phil Walker
Phil Walker

Level 3 Expert

605 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...