Question about Mitsubishi WS-55511 55" Rear Projection Television

1 Answer

Green light flesing all the time no mater what i do

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mitsubishi Master
  • 14,553 Answers

ONLY 1 of 2 things can cause this problem----

First thing to do is remove front speaker grill--it should pull out and is secured with plastic pegs--behind it you will find an inspection plate---

Notice the one or two pairs of wires coming from the front keyboard of the set---remove the inspection plate and follow the wires to the right--you can unplug both plugs(most have two and they are marked with letters and different s so you cannot get them wrong)

The idea here is to remove the front keyboard with its reset button etc from the circuit---You will still be able to try to turn the set on with the remote---

These sets have a Receiver that is called a DM board--(large metal box to the left as you look from the back) and if the power goes out the green light will blink for about 70 seconds and then go out---it is the Receiver booting up. It is called the DM board.

If disconnecting the keyboard allows the set to turn on--you have a bad reset switch and two choices---either operate the set only with the remote or to remove the front screen and get at the reset switch (it is tiny) and remove and/or replace it.

If disconnecting the keyboard does not restore the set to operation---the receiver is bad---there are 4 or more caps and some pico fuses that can fail in that unit---Mitsubishi no longer sells or repairs these--if it is bad and not the caps there is a company you can send the unit to and have it repaired--if you need to know their name let me know---

You can call them and get a quote for repairing the receiver.


Let me know what more information you need--I am here to help.
There are kits for sale on the internet for this repair that include the 4 caps that fail and some pico fuses on the board in that unit.

SD TECH

Posted on Oct 26, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My board on Tony Hawk Shred won't calibrate no mater what I do. I've tried everything and none of it works. Please help me.


i've got the same problem, as well do about 90% of other people who got this for christmass. like me. i'm about 2 monutes from saying **** it. i try like 20 times every other hours, i've done all the tricks, but they may work for you

use old batteries, try with no light on, try with alot of light on, try it on a stand, try it on green eggs and ham.( sorry humor to lighten the mood)

Dec 25, 2010 | Activision Tony Hawk: Shred

1 Answer

I dont have 24 volt to c g r w y but my transformar have secendary volt.indicet flesing light flikar on #6. ineed to fix out side condenssor unit cantol by the tharmostatebut idont have 24v in r


Check for a fuse in the unit. make suree you have power to the transformer. There might be a door switch not making. If power is there but no 24V replace transformer.

Aug 18, 2010 | Goodman Heating & Cooling

1 Answer

Control lite just blinks no mater what button i push wont start


HI,

If it is the green clean light flashing then you may have a problem with the water heating up. I have put together some instructions on what might cause that and how to reset the control so you can use the dishwasher again. Follow this link and let me know if it was helpful.

http://www.fixya.com/support/r4628906-flashing_or_blinking_green_clean_light_7

May 04, 2010 | KitchenAid 24 in. KUDI02IRBS Stainless...

1 Answer

Im trying to wire my radio to my car, but the colors on the inside of my car are different to the ones Im acustomed to...plz help


No mater what color sceme you have the wires all play the same roll. Ground/ power/ common. B/W , Red, Yellow, purple/wh, brown , some cases blue, blue /wh and green. Check all wires for power on and off circuit with test light. black to ground - side speaker rd to + side etc;

Mar 04, 2010 | Car Audio & Video

1 Answer

My scanner hp3570c has developed this problem since some time now, it scans but the white background is always in some megenta tone and the mater appears in green and blue. please advice what the problem...


you need to depress the original onto the scanner it could be the scanner is not fully resting on the flat surface, or not fully closed, say for example there is a big gap on the scanner and the white plate, try scanning a single sheet only and see if you have the same prob. i assume you are scanning a book or thick material or something, the colored images you see is the reflection of the scanner that goes astray from the actual images that needs to be scanned, the light that was exposed without the white plate reflected was converted into Green and Blue, pls try .

Jul 10, 2009 | HP ScanJet 2400 Flatbed Scanner

Not finding what you are looking for?
Mitsubishi WS-55511 55" Rear Projection Television Logo

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1208 Answers

The Knight
The Knight

Level 3 Expert

73691 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...