Question about RCA D61130 TV
I have an RCA model number d61130 everytime I turn it on it shuts right back off and does this three or four times, I can't get it to stay on, can anyone tell me whats going on? thanks single mom with no tv skills
SOURCE: rca hd model #d52w15
That flashing means that the sweep power supply didnt start up along with the main power supply. It could be a shorted horizontal output transistor or a bad flyback transformer. Youll need a service manual to scope out the horizontal drive and see why itsnot starting up or staying on. if your not a servicer then there are no real user serviceable parts inside so contact your local AUTHORIZED servicer as they will have all the right service manuals as well as acess to all the proper parts. Not that an unauthorized shop is a bad thing its just they the unauthorized usually are not aware of troubles that rca sends there peeps. Good Luck
Posted on May 28, 2006
I AM SORRY ABOUT YOUR PROBLEMS WITH YOUR TV... AS IT IS YOU BOUGHT YOURS AT APPROXIMATELY THE SAME TIME THAT I BOUGHT MINE. I STARTED HAVING PROBLEMS WITH THE SAME THING YOU DID ABOUT 6 MONTHS AFTER I PURCHASED IT. BUT THEN I THOUGHT IT WAS DUE TO SOMETHING MY NIECES HAD DONE TO THE TV. MY DAD TRIED TO FIX IT AND IT WORKED FOR A WHILE AND THEN ON CHRISTMAS EVE 2006 IT WENT COMPLETELY BISERK!!! NOW I DONT EVEN KNOW WHERE TO GET THE CONTROL PANEL.
Posted on Feb 12, 2007
SOURCE: TV Turns Itself Off
That set is a CTC197 chassis with a common problem - flyback or more commonly referred to as the FBT...
The FBT is a high voltage transformer which delivers a great deal of voltage to the crt to light the tube. The FBT is RCA p/n# 237502 and a ring test can confirm its failure. Another shortcut technicians use is to unsolder the collector of the HOT and power the set. If it powers with up and has audio you're in business, just replace the FBT and it's recommended to replace R14704 its an 82k ohm- 1/2w resistor and C14710 a .01/1kv cap as well. I believe if you order these as a kit, (ie: original RCA FBT), the two other parts are included - but ask to make sure.
You might also check for continuity across E & B of the HOT with a multi-meter while you're in there and if you get any resistance at all the HOT is shorted also... Or for simple reliability just replace it anyway.
Hope this helps!
Posted on Nov 13, 2007
SOURCE: 36 inch RCA 36v430t
Mike-It looks like the power supply is going on your tv-it can be replaced. This happens, usually, when little kids are playing wth the remote or power button on the tv. Turn it off and on a whole bunch of times in a row, kids love to do that, and it burns out the power supply part- to make a CRT tv like your RCA36 incher- which is a beautiful machine- I have the RCA/PROSCAN 36 incher-LAST longer...You should always wait 5 min between turning it off and on. Don't ever sell it. This one is worth fixing. It has better color and sound Than the new plasmas and lcds-The Pros know this. Be carefull, they might try and talk you out of it-so they can fix it and have it for themselves. So what if it's not High Deff. It's a great set.
Posted on Jul 02, 2008
Tips for a great answer:
Sep 25, 2015 | Symphonic Standard (CRT) Televisions
Aug 30, 2008 | RCA Standard (CRT) Televisions
May 20, 2013 | RCA Standard (CRT) Televisions
May 18, 2012 | RCA D61130 TV
May 18, 2012 | RCA D61130 TV
1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
Sep 23, 2011 | RCA TruFlat 27F520T 27" TV
Jul 15, 2011 | RCA D61130 TV
Feb 24, 2009 | RCA 32V550T 32" TV
30 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: