Question about Office Equipment & Supplies

Open Question

How to enter the Service mode in Sharp LC32Af10N to change some settings

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 148 Answers

SOURCE: Service Mode On Sharp SF2530

A little rusty on this machine, but try this.

This code means you have had to many paper jams in the fuser without removal. Make sure all is clear in the fuser and exit sections.

Then on the control panel you will press a series of buttons as follows.

Press the Clear, Press interrupt, Press Zero, Press interrupt, Enter # 14, Press start, That should reset the machine...

Hope that helps...
Lbcoaster

Posted on Jul 02, 2008

Ad
  • 1 Answer

SOURCE: Service Mode On Sharp SF2530

i don no

Posted on Jul 08, 2008

  • 255 Answers

SOURCE: how i can enter in service mode of sharp AR 5316

On the panel display, press #, interrupt,0, interrupt keys in that order. Display will go off then enter the desired number and press Print. If the command has subcode, enter it and press Print to execute.

Posted on Nov 13, 2009

rezazadeh
  • 328 Answers

SOURCE: sharp copier AR5316 how to enter simulation mode

# interrupt C interrupt 26 start 6 start 4 start then turn off then on

Posted on May 23, 2010

  • 255 Answers

SOURCE: hello, how to enter SP mode at copier SHARP AR122

Hallow, mostly when you see signs on the machine, its always good to obey their meaning for copier reliability. When the copy quality is good and the service and developer signs appear, you can continue working and ignore them but if they offend you, then here is the way to reset;

  1. Press C then density then C then density keys in that order. Display must go off if not repeat till it does.
  2. For service call reset, enter 20 then press copy key then 1 then copy key.
  3. For developer reset, repeat 1 above and enter 24 then copy key then 3 then copy key.
  4. Turn the copier off then on and the signs will not appear.

Posted on Dec 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to change my sharp TV from Spanish to English


You have to enter its service mode option to select language. If you wish to get some details; visit the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
NB: Please read and understand well, the instructions to enter the service mode, before you begin. Be very careful. Note how to "EXIT" the service mode; after entering and adjusting data. This is very important.
Search the site by type in the "brand name" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Sep 15, 2017 | Sharp Televison & Video

2 Answers

HALO I Wanna to know sharb service mode?


Yes the Sharp Mx2300n has service mode. To enter service mode you will need the original admin password, this password 9 times our of 10 is admin.

Step 1: press SYSTEM SETTINGS button on printer

Step 2: At the top right side of the screen is two buttons 1 Admin Password 2 Exit. Press Admin Password.

Step 3: Press password button

Step 4: type admin (no caps)

Step 5: press OK

And remember to sign out when your done. I hope you enjoy your sharb printer, I certainly enjoy my sharp it's a good one yes.

McHaggerty out

Feb 23, 2015 | Sharp MX-2300N Color Copier

1 Answer

SHARP LCD TV DEFAULT SETTING


To make it a factory reset, you have to enter its service mode option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
NB: Please read and understand well, the instructions to enter the service mode, before you begin. Be very careful. Note how to "EXIT" the service mode; after entering and adjusting data. This is very important.

Jan 15, 2015 | Sharp LC-19SB25U 19 in. LCD HDTV

1 Answer

Need to remove the pass word of my tv sharp 21inch slim type


You have to enter its service mode option window to unlock it. If you wish to get more details about how to enter service mode to Sharp TV, check this link.

Mar 13, 2013 | Sharp Televison & Video

1 Answer

Sharp LC32AF10N . This TV does not switch ON.It goes always to Standby


Send your email address to me by Fixya, and get a copy of the schematic by return mail.

Oct 16, 2012 | Televison & Video

1 Answer

Factory Reset for Sharp ar-m550n


If all you need to reset are user settings, the easiest way is to press #*C* on the control panel to enter service mode. Ener 26 using he number keys and press the copy button. Then enter 6 and press copy again. Change the language from USA to Canada by pressing 2 and copy. Press CA to reboot the machine. After reboot repeat the proceedure to change the language back to USA and press CA again. This will clear out user settings and some service settings.

Jul 20, 2012 | Office Equipment & Supplies

1 Answer

How to enter in the simulation mode for a sharp AR-5316 digital photocopier and change the settings


Try pressing #, *, C, *, to get into the simulation mode. To change user settings, try the menu feature. Good luck.

Feb 27, 2011 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

Sharp service code H5-01


To enter simulation mode to reset errors enter this sequence on keypad.
P, * , CA , P then enter sim # 14 to reset code.
press " custom settings" button to return to previous menu and CA to exit sim mode.

Dec 10, 2008 | Office Equipment & Supplies

4 Answers

Looking for a reset code for sharp ar-bc320


The default key operator access code on that machine is 00000
with this code you can enter network settings and change ip and subnetmask to your new requirements.

If this doesnt work you can get keyop password by entering simulation mode and get service report which has user code on it.

Apr 12, 2008 | Sharp AR-BC320 All-In-One Led Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...