Question about Kenmore Washing Machines

Open Question

417 kenmore washer cannot find filter

Model 417 48116700

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 89 Answers

SOURCE: Kenmore Washer/Dryer Stack -- Need to replace Washer

first of all. comming from a Sears Technician.. (don't yell) -- the delivery drivers only know about delivering stuff. they dont know too much,
if the two are the same size they can be stacked.
sometimes have to rig something up
and yes, for that model the top is removed, clips go on the rear and screwed at the front.
in some areas it is sold seperatly as a stacking kit

Posted on May 28, 2009

Ad
  • 109 Answers

SOURCE: Kenmore model #417 40042990 Front Load Washer is

I would firstly take the back cover off and check the belt has not come off. Then check that the drain pump is not blocked.

Posted on Jun 16, 2009

blueextc3221
  • 15935 Answers

SOURCE: we are getting an error code ddo on our wahser?

The DDO error is telling you that the detergent door is open. This error occurs when the detergent door has not latched properly when the unit is started.

There is a sensor that is dependant on a magnet, that is attached to the door, to trip it and send the proper door closed signal to the control oard. If this magnet comes off, or loose the signal will not be sent to the control board, and the error code will be displayed.

Now for the bad news. The magnet is in such a position that a considerable amount of labor is required to replace it.

Unless you are mechanicly inclined and handy with a box of tools I do not recommend that you attempt this repair. It is very involved and is not a DIY repair. It is best to let a tech handle this repair. An approximate price range for this repair is $175.00 to $275.00, or more depending on where you live.

Thanks for using FixYa - a Very Helpful Rating is appreciated for answering your FREE question.


Posted on Jul 27, 2009

  • 1122 Answers

SOURCE: kenmore model 417 94702300 stack washer dryer wont

bad lid switch-mike

Posted on Jul 30, 2009

GodBlessU
  • 3513 Answers

SOURCE: washer wont run spin cycle model 417

Hi,
The reason for your washing machine not to spin would be of a faulty motor coupling.

If the washer will fill and drain, but won't agitate or spin, you may have a broken motor coupling. The noise of the motor engaging, lack of agitation and ability to still drain are the usual symptoms. This is a common fail item with this model washer through normal wear and tear. Newer versions of the coupler are more resilient and resist breaking

The motor coupling is located between the drive motor and the transmission and takes the place of a drive belt. They do wear out and can break. The replacement part number is included in the link I provided and is an improved upgraded coupling that is more resilient. It should last longer. If you have questions, or require additional assistance, please let me know. I hope this helps you.

A replacement coupler can be purchased on line at appliancepartspros.com for about $11. Just use the part number in the link and "Search by Part Number" for your search criteria.

Thank you for contacting Fixya.com

Posted on Aug 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a stacked 417 Kenmore,what is the best way to get to the seal-tub


Here is a service manual for the stacked set. The model may be a little different but the repairs will be the same.

Oct 22, 2012 | Kenmore 98702 Stacked Washer/Dryer

1 Answer

Kenmore dryer,, looking for adiagram for the belt on a kenmore dryer


Below are the belt diagrams for Kenmore dryers.

jahn27_201.jpg
Figure 1. Whirlpool-made Kenmore dryers with removable back panel, filter on top, and model numbers starting with 110 or C110.

jahn27_202.jpg
Figure 2. Whirlpool-made Kenmore dryers with non-removable back panel, filter below the door, and model numbers starting with 110 or C110.

jahn27_203.jpg
Figure 3. Frigidaire-made Kenmore dryers (model numbers starting with 417).

Mar 01, 2011 | Kenmore Dryers

1 Answer

I have a model 417-44042400 front loader. I


See the following site for Sears manuals for your washer:

They are PDF files that can be downloaded and printed.

http://www.managemylife.com/mmh/owner_manuals/search?query=417.44042400

Apr 05, 2010 | Kenmore 44042 Front Load Washer

1 Answer

Neew lint filter


Your washer/dryer was made by Kelvinator / Frigidiare.
(This is the 417 prefix)

See the Sears parts list for your machine:

http://www.searspartsdirect.com/partsdirect/getModel!retrieve.pd?modelNumber=417.99175120&pathTaken=partSearch

Do a part search on Lint filter and you should see the part number 3204278

Although the Sears site says that this part is "no longer available", by doing a Google search on the part number itself, you should be able to find a number of places that have that part.

Mar 27, 2010 | Kenmore Washing Machines

1 Answer

Kenmore Washer/Dryer Stack -- Need to replace Washer


first of all. comming from a Sears Technician.. (don't yell) -- the delivery drivers only know about delivering stuff. they dont know too much,
if the two are the same size they can be stacked.
sometimes have to rig something up
and yes, for that model the top is removed, clips go on the rear and screwed at the front.
in some areas it is sold seperatly as a stacking kit

May 28, 2009 | Kenmore 43042 Front Load Washer

1 Answer

Kenmore 3.5 super capacity front load washer won't dispense fabric softener


Kenmore 110 front load washer wil not dispense fabric softner. Code 21. Have already checked pump and filter obstructions

Oct 10, 2008 | Washing Machines

3 Answers

HOW DO YOU TAKE THE DRYER OFF?


If it is stack from the factory (ie..came as one peice) you cant

Jul 24, 2008 | Kenmore 98702 Stacked Washer/Dryer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2180 Answers

fordexpert

Level 3 Expert

5520 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...