Question about DVD & Blu-Ray Players

1 Answer

Phase linear uv 9

When the vehicle is turned on the volume goes straight to 30 anyone how or what is causing this to it

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Yes, if it's the same as the UV8, get it to the desired volume and hold in the volume dial for 5 or 6 seconds. I had the same problem, only mine went to zero. Pushing in the button "sets" the starting volume.

Posted on Oct 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I improve the volume on recorded TV shows?


  • If you record from an outside source, turn up the source (e.g.digital receiver) volume. If recording sound from a VCR's own tuner, tape path, especially the drum(once you open the cover)and linear voice recorder post (to the right after the drum)must be cleaned. Get instructions from the web how to do the cleaning, otherwise you may damage the machine. Switch to hi-fi track if you have one and adjust the tracking.

Mar 04, 2015 | DVD & Blu-Ray Players

1 Answer

Volume always loud when vehicle is started. I turn it down before I turn it off.


You can save your default volume setting on the Audiovox. Normally the procedure is the same from storing a FM channel. Your manual will have the details for your specific model.

May 07, 2010 | Audiovox VM9311TS

1 Answer

Jensen Phase Linear uv10 dvd wont play while driving


When You installed it the pink wire that said to brake did you put it to an actual ground instead of the barking brake?

Jan 03, 2010 | Jensen DVD & Blu-Ray Players

1 Answer

Phase linear uv8 DOSE NOT PLAY DVDS


Remove cover of player, you will see glass eye which is laser eye. Take rubbing alcohol and cotton swab and clean the eye with the alcohol soaked cotton swab. If this player is self- fixable, than this will do the trick. If cleaning the laser eye didn't help, than they player will have to be repaired or replaced.

May 04, 2009 | DVD & Blu-Ray Players

1 Answer

Region free code for samsung HD-BD2E


Haven't tried it, but found this online somewhere....


1. Open tray and remove any disks in tray.
2. Close tray.
3. Switch Off Player and Unplug from mains wait 30 seconds (this clears RAM)
4. Reconnect to mains
5. Turn on player with remote.
6. Press ENTER on remote.
5. Press 8, 4, 2, 6, 9.
7. Press ENTER on remote. (The tray will open)
8. Switch off power from remote, then switch back on.
9. Player is now Region Free.

Jan 22, 2009 | Samsung BD-UP5000 Blu-ray and HD-DVD...

1 Answer

I have moved to the US from Ireland, and I have about $500 of Region 2 DVDs that I cannot play on my Samsung HT-X50. I can't find any region code hacks that work - can anyone help me?


1. Remove all discs from player.
2. Turn off the player
3. Unplug the power cord to the player
4. Wait 30 seconds, then reconnect the power cord.
5. Turn on player with the remote control. Wait until player LCD says 'No Disc'.
6. Press 'Enter' on remote control. (There will be No On-Screen Response.)
7. Press 8, 4, 2, 6, 9 on the remote control. (There will be No On-screen Response.)
8. Press Enter on the remote control. Player will power off.
9. Turn player on using remote control.
10. Open the tray.
11. Close the tray.
12. Turn player off then on.
13. Player is now Region Free

Aug 13, 2008 | Samsung DVD & Blu-Ray Players

1 Answer

Hi i need the hack code for my region 1 Samsung HTZ310 dvd player. Anyone can help please?


My brother got this one as part of a deal and I hunted around and found that most if not all HT variants have the same region free hack:

1. Remove disc from tray.
2. Switch off player and unplug from mains.
3. Wait 30 seconds, then reconnect mains.
4. Turn on player with remote. Wait for player to finish loading and display 'no disc'.
5. Press enter on remote. (There will be no on-screen response.)
6. Press 8, 4, 2, 6, 9 on the remote. (There will be no on-screen response.)
7. Press enter on the remote. Player will automatically shut off.
8. Turn player on.
9. turn off.
10. Turn player off then on again.
11. Player is now region-free.

Did this on a Samsung HT-Z310 and other than I think maybe the tray not opening when it said it worked fine and the player is now region free.

Jul 09, 2008 | DVD & Blu-Ray Players

1 Answer

Wharfedale CR1CD CD Clock Recently purchased from Argos the alarm goes off at full volume and can be set otherwise.


Had the same problem and returned it for a replacement. The new one doesn't go off at full volume, but instead switching bedside lights on/off cause it to turn on/off. Guess it's very susceptible to electrical interference. Going back again.

Jun 06, 2008 | Wharfedale DVD-M3 DVD Player

1 Answer

Need to by pass


Hi,

There are two ways of bypassing the brake sensor in a Phase Linear UV8:
1. ground the pink wire using a toggle switch;
2. Use the unit's built-in bypass software.
a. Select "Tuner" mode (AM/FM);
b. Press the "Setup" button;
c. With the use of the remote, press 5, 4, 3, 2, 1, and then press and hold 0 for a couple of seconds or until the menu changes. d. d. Display should show hidden menu. Among the options would be to turn ON the "Brake override";
e. Press th "X" on the bottom leftmost corner.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FIXYA.

Feb 15, 2008 | DVD & Blu-Ray Players

32 Answers

Phase linear uv8=jensen brake bypass code


from remote setup, 5 4 3 2 1 0(hold "0" for 4 seconds) let go. look for the brake override option and turn it on.

Nov 16, 2007 | DVD & Blu-Ray Players

Not finding what you are looking for?
DVD & Blu-Ray Players Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top DVD & Blu-Ray Players Experts

kakima

Level 3 Expert

96683 Answers

The Knight
The Knight

Level 3 Expert

68368 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...