Question about Gateway 5200S PC Desktop

Open Question

Forgot how to put face cover wires back on gateway 5200s motherboard

Power wire - power led wire and hhd led wire on faceplate to motherboard

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 121 Answers

SOURCE: gateway 5200s won't boot

try replacing the ram
if this does not works then there is surely a problem with the bios

Posted on Jul 09, 2009

Ad
  • 570 Answers

SOURCE: Need to reconnect (Power LED, Power SW, H.H.D LED)

Here is the diagram for your connection. It may vary but most probably there are names are written on the mother board for the connections

76c2eec.gif

Thanks.

Posted on Oct 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gateway 500GR Mother board Connector S Wiring


You are correct so far.

This is a perfect example of using deductive reasoning based on intelligent thought.

'Armed' with that I can see you will go far in life.

Gateway Support > Gateway 500GR Desktop PC > Main Support page,

http://support.gateway.com/s/PC/R/3724/3724nv.shtml

Click on Components in the list.
Scroll down. Under the bold black heading - Motherboards - click on
102007 - Intel (Augsburg) No CPU Motherboard R0

Click on Specifications.
Chipset: Intel 915G Chipset

http://www.ascendtech.us/gateway-augsburg-intel-915g-motherboard_i_mb4gwaugsburg.aspx

The front of your computer is the Front Panel.
The area of contact pins on the motherboard, that the wires from the Front Panel go to, is the Front Panel header.

In the photo the Front Panel header is marked by the letter S.

Let's go to Intel Support, and download the Product Guide for an Intel D915GAV motherboard,

http://www.intel.com/support/motherboards/desktop/sb/CS-012048.htm

Click on the blue -
Intel Desktop Board D915GAV Product Guide - (English) PDF
Scroll your mouse cursor to the bottom/middle of the page, to bring the 'ghosted out' navigation guide into view.

Click on the Adobe PDF icon to the far right.
(When you hover your mouse cursor over it, "Show Adobe Reader toolbar" is briefly shown)

Different design motherboard in the layout of certain headers, and connectors, but same Ol' Front Panel header pinout, Intel uses for 10 pin Front Panel header's.
Whether it is an Intel O.E.M. motherboard, or one they made for a pre-built computer manufacturer.

Front Panel header for Gateway 500GR, is next to the bottom edge of the motherboard, and all the way towards the right.
5 pins across the Top row, 4 pins across the bottom row.

Pins on the Top row are numbered ODD.
Pins on the Bottom row are numbered EVEN.

TOP row; Starting on the RIGHT side going towards the Left;
Pins 1, 3, 5, 7, and 9.

BOTTOM row; Starting on the Right side going towards the Left;
Pins 2, 4, 6, and 8. There is NO Pin 10.

A) Pins 1 and 3 are for the HarDDrive activity LED. (Light Emitting Diode)

Pin 1 is for the Positive ( + ) wire. If the HDD LED is dim when the Harddrive is active, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

C) Pin 9 is N/C. No Connection. Pin reserved for the factory.
(5 Volts DC)

D) Pins 2 and 4 are for the Power On LED.
Pin 2 is for the Positive ( + ) wire.
If the PWR ON LED is dim when the computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch.

F) Again, there is No pin 10.

Regards,
joecoolvette

Aug 21, 2012 | Gateway Computers & Internet

1 Answer

I cant find the case wireing connections on the motherboard led hhd rw led power and sound were do they go ...and can u send me a pic of how the wires look and were they go thanks


from the Compaq case / cabinet front pannel a single connector will connect to the board.

there will be set of pins / connector with mark" pannel SW / " on the board

It may not mention each seperatly.

May 19, 2011 | Compaq (277500-001) Motherboard

1 Answer

Need to reconnect (Power LED, Power SW, H.H.D LED) wires for eMachines MotherBoard D33007 VG33


Here is the diagram for your connection. It may vary but most probably there are names are written on the mother board for the connections

76c2eec.gif

Thanks.

Oct 22, 2010 | Gateway Computers & Internet

2 Answers

I cleaned my pc, and disconected the wires that are right downside corner. I cant remember how to put them back rightly. Any help? hdd led power led + power led - power switch (sw) reset switch (sw)


H57H-AM2 v2 Motherboard in a Gateway DX4840 wire connections for Front Panel are shown here in Photo. I took them before I disconnected mine so it works.3_3_2012_12_10_44_pm.jpg3_3_2012_12_10_56_pm.jpg

Jun 15, 2010 | EliteGroup ECS L4VXA2 (CDL4VXA2)...

1 Answer

Pwr s/w- pwr led- hhd led were disconnected how


here is guide PG 174 may be useful but it almost show nothing about leds and connections try find colors in connectors and it may help. It is official support page if find more will post.

Aug 05, 2009 | Gateway Computers & Internet

1 Answer

Gateway 5200s won't boot


try replacing the ram
if this does not works then there is surely a problem with the bios

Jul 09, 2009 | Gateway 5200S PC Desktop

2 Answers

Emachines t6522


I assume you are trying to connect the wires from the faceplate to the motherboard. Get a magnifying glass and see if the board is marked as to Power, Speaker, HDD LED, Reset, etc. Trace the wires to the faceplate and note what the function of each pair of wires is and attach to motherboard as necessary.

Jan 17, 2009 | E-Machines eMachines Desktop PC

1 Answer

FRONT control PANEL Wiring


You need to determine manufactuer of board go to there website and download the user manual ...

Jan 09, 2009 | FIC VI 13L Motherboard

1 Answer

Connections


sorry friend its not accessible here.
send it to my mail iqbal_delphidev@yahoo.com

Thanks
Iqbal

Apr 08, 2008 | Shuttle AV42 Motherboard

Not finding what you are looking for?
Gateway 5200S PC Desktop Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Gateway Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...