Question about ASUS Eee 900 Notebook

2 Answers

How to load new ssd for eee pc

Getting new ssd and dont know what ill need to put on it to get pc working again

Posted by on

  • helen_doodso Jan 02, 2009

    thank you thats the first reply on this ive had today. it should be helpful.

  • helen_doodso Jan 03, 2009

    my old hard drive is in such a mess I wonder if its worth trying to get aything off it. Thanks for your help i wondered if i could use the linux cd

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 221 Answers

By SSD I assume you are refering to a Solid State Drive to replace your existing hard drive. If this is the case you need to install the drive and then boot off the CD that came with your computer and reinstall the operating system. Note that all you old info will still be on the original hard drive but you can still access it by purchasing a 2.5 inch USB hard drive enclosure. When you plug it into a USB port it will be detected as a second hard drive.

Posted on Jan 02, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 37 Answers

When you set up a new SSD you should create a WPA or WEP password for access to it.

You start the Asus minibook. You should get an icon for Wireless Networks on the home page.

Select it. Your new SSD should be detected. You click to Connect. You will be prompted for a WPA or WEP password. Select one or the other and enter the password. Then you should be able to connect.

Posted on Jan 02, 2009

  • dukyana Jan 03, 2009

    Hi I'm not sure I understood your original problem. What did you mean by SSD? Is it a new system disk? What is wrong with the hard drive of the PC? Could you give me more detail on this.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Satellite S50-B-15P Hi I want to find out what type of SSD drive is installed in my laptop. I want to up-grade to higher capacity. Thanks


Download SiSoft Sandra. It will tell you exactly what you have and also test every component. The best program by far and has been since Windows 98.

http://www.sisoftware.net/

Jan 11, 2017 | Computers & Internet

2 Answers

Are 2002 Aztec computers compatible


I am assuming you are discussing the 2002 Pontiac Aztec, the early crossover with the rather distinctive look. I would assume that since they were made by the same manufacturer and they used the same parts that their computers should be compatible. I can't say so for certain as you haven't provided much information, but, unless one of the Aztec owner swapped out the original computer and replaced it with an updated device, the computers should be compatible.

If you are thinking of trying to swap computer chips, I would advise you to wait and let a professional do it at an independent shop. The reason I suggest this is simple, unless you know how to access the computer chip correctly, you risk accidentally ruining it. If you handle the replacement chip incorrectly it is entirely possible that for a stray static charge to ruin the chip by blowing out a trace. Also, if you damaged the socket from which the original chip was removed then it is possible that you will not be able to reinsert the new device without bending any leads on the bottom. If the leads are damaged, then the new computer won't work.

Even if the new computer chip and the original chip were already installed in installable cases (the way most desktop computer chips are installed), it is possible that when you removed the computer, you might have damaged the receiving socket which means that when you go to insert the new computer carrier it won't work correctly because a few or many of the pins on the bottom of the board won't sit correctly.

Jan 03, 2015 | Computers & Internet

2 Answers

How do I get the battery out of my acer laptop


Your Model of Aspire has a different battery release method, see attached pic on how to do it. This is a pic from your User Manual, you can download it from here Download Acer Aspire E1 572
Manual
. I suspect that the information you have been given regarding battery removal and passwords refers to removing the cmos battery as in a PC in the hope that it will clear Bios activated passwords.

1f8d6221-e1cf-4930-b562-78dc8560ceb4.jpg

May 04, 2014 | Computers & Internet

1 Answer

Error code 0151


hard drive failure. replace with new drive and reinstall whatever os you choose. i recommend 240-480 gb ssd.

Apr 12, 2014 | Dell Vostro 1015 Laptop Computer (Intel...

1 Answer

I've a acer laptop model no 4820T. In this touchpad option not working but left and right button was working.... wats the problem n wat to do? tel me soon............."


Try the following: Using your FN key and the F7 Key together it might work again. You could have toggled the touchpad off. If that does not work you have issues with either the touchpad or the operating system. Best of Luck.

Sep 14, 2013 | Computers & Internet

1 Answer

Removing bluetooth chip


Without knowing what the desktop computer motherboard is, I\'d only be guessing as to location of Wi-Fi chipset.
However even if I knew the motherboard manufacturer name, and model number; the point is Moot.

A) You remove that Wi-Fi chip, and kiss the motherboard goodbye.
It\'s designed into the circuitry of the motherboard.

Isn\'t going to be jumper wires taking it\'s place, and making connections to circuit traces on the motherboard.

B) Do you have a wireless router?
Dunno.
Do you have a wireless connection set up?
No.

You can use just a LAN connection. (Hard wired)

C) Suggest if having a Bluetooth option on your motherboard is not an option then use a different motherboard that doesn\'t have that option.

Regards,
joecoolvette

Apr 06, 2013 | Computers & Internet

1 Answer

How do i reset my computer to an earlier date?


Most computers have a RTC or "real time clock" in the BIOS. BIOS (or "Basic Input Output System") controls how data gets into and out from the processor (via keyboard, disk, etc.). Be careful making changes. The BIOS is normally only accessable when the computer is powered on or reset, and then only while performing the POST (or "Power On Self Test"). At this time your screen may display text describing memory, drives, controllers, etc. Some machine have a "silent boot" enabled which displays a manufacturer's graphic or logo instead of this data. It is during this time the the BIOS may be accessed. Depending on the manufacturer of your computer, a key (Delete, Escape, F1 or some other) or key combination (ALT + F1, ALT + S, or some other) will be needed. It is required to press the key or key combination prior to the Operating System loading message(s). This can be done be repeatedly pressing the key (or key combination) once every second (or two) during the POST. Holding the key(s) down the entire time - or pressing them too often will result in an error, and require starting over again.

Once the BIOS screen is presented, you will have to scroll the entire page(s) to find the clock. Most BIOS brands have more than just a single page of settings. Using the the up, down, left, right, PgUp, PgDn & Enter keys - navigate to the clock hours and minutes and adjust as needed. Make sure that you SAVE changes before exiting the BIOS screen. Upon exit, the computer will reboot with your settings.

Your Operating System may also provide a way for you to change the system time (and date) as well. Try clicking on the time / date to see if it will bring up a dialog box that allows you to make the change.

I hope this helps and good luck! If my answer was helpful, please rate it "4 thumbs up" Thanks!

Jul 27, 2011 | Computers & Internet

2 Answers

Using bluetooth on Vista with Itunes


Apple update to Itunes 9-there's a bluetooth link on it

Sep 20, 2009 | Toshiba Tecra 8100 Notebook

1 Answer

I can't get my computer to accept my user password to logon to my computer; password is correct and is being typed correctly. I get that wrong username or password message. In addition to this, my...


Please download the ERD Winternal Image from http://www.mininova.org/tor/857048 and burn it in a CD.
Thenboot your PC from the CD. Select your Windows Media Edition for whichyou have forgot password. Without asking for any password you will getinto Windows. Then goto control panel->User Accounts->Select theUsername[for which u want to change password]. Then use change passwordoption to change password. Then Reboot the PC and remove the CD. Nowyour windows password will be reset.
Thanks.

Mar 08, 2009 | Computers & Internet

Not finding what you are looking for?
ASUS Eee 900 Notebook Logo

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

David
David

Level 3 Expert

756 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...