Question about Panasonic KX-TG1033S Cordless Phone

1 Answer

KX-TG9344 Programming problem. Cannot turn off the talking callerID handset and base unit.....I have tried to understand your instructions and am at a loss..........if I call the home phone using my cell phone(which is in the phone book)it will announce my name......how do I turn this feature off on both handset and base unit? Joel

Posted by on

  • jejshap Jan 08, 2009

    I have exactly the same problem as jjwey. I cannot turn off the talking caller ID. Help



    jejshap@yahoo.com

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 94 Answers

This is the info from the users manual, it seems a bit strange,
but claims if you set the number of rings before it answers, (for the answering system) to "2" it will stop the audible caller ID.
Here it is from the manual.

If you turn on the answering system
and set the number of rings “2” (page
38), the unit does not announce the
caller information. If “Toll saver” is
selected and there is a new message,
the unit does not announce the caller
information.
When you receive a call while on the
phone, the 2nd caller’s name is not
announced even if you subscribe to
both Caller ID and Call Waiting with
Caller ID services

Posted on Jan 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Want to register an additional handset for panasonic kx-tga9341t


You need to contact Panasonic's customer service.

May 01, 2012 | Panasonic Phones

3 Answers

Panasonic KX-TG2740


u have to try change battry its might be week so try it

Sep 08, 2008 | Panasonic KX-TG2740 Cordless Phone

1 Answer

Difficulty adding a fifth KX-TGA939T handset to the system


The Best Buy store sold me the wrong model for that system !

May 19, 2009 | Panasonic KX-TG1033S Cordless Phone

1 Answer

Talking caller ID Want to turn it off on base unit!!


You have to press "Menu" "#" then 1 6 2.
You can also just press menu and then scroll to talking caller id, select it and then choose to turn it off. Be sure to press "save" or the your choice will not be saved.

May 17, 2009 | Panasonic KX-TG1033S Cordless Phone

1 Answer

TOO FAR FROM BASE


Hi! This may cure your problem!
Re-registering the handset
If “No link to base. Move closer
to base, try again.
” is displayed
even when the handset is near the base
unit, you may need to re-register the
handset to the base unit.
Important:
LMake sure the base unit is not being
used.
LHave the handset and base unit near
each other when re-registering the
handset.
LKX-TG5422 and KX-TG5423 only:
Confirm the extension number of the
handset which has lost its link to the
base by placing the handset on the base
unit or charger.
If you accidentally assign another
handset’s extension number to it, the
other extension will stop functioning.
1 Handset:
Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Registration” by pressing
{V} or {^}, then press {>}.
4 KX-TG5421 base unit:
Press and hold {HANDSET
LOCATOR
} until the CHARGE
indicator flashes.
KX-TG5422 base unit:
Press and hold the handset locator
button that corresponds to the handset
you want to re-register ({HANDSET
LOCATOR
1} or {HANDSET
LOCATOR
2}) until the CHARGE
indicator flashes.

Below is a link that will take you to the instruction manual for your phone.

http://www.phone-manuals.com/panasonic/KX-TG5422M.shtml

Hope this helps! Hal

Feb 27, 2009 | Panasonic KX-TG5422M Cordless Phone

1 Answer

TALKING ID


This is from the manual on pages 25/26. After the info below is the link to the manual.

1
{MENU} i {#}
2 Enter the desired feature code.
3 Enter the desired setting code. i {Save}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.

Talking
CallerID
(Handset)
{1}{6}{2} {1}: <On> {0}: Off

Talking
CallerID
(Base unit)
{*}{1}{6}{2}
{1}: <On> {0}: Off

http://service.us.panasonic.com/OPERMANPDF/KXTG9331.PDF

Jan 22, 2009 | Panasonic KX-TG9331T Cordless Phone

1 Answer

Sync a new handset to kx-tg5632 phone


This works on MY panasonic; May work on yours too!

Registering a handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base
unit, register the handset.
1 Handset:
{MENU} i {0}{0}{1}
2 Base unit:
Press and hold {LOCATOR/
INTERCOM} until the IN USE
indicator flashes.
LAfter the IN USE indicator starts
flashing, the rest of the procedure
must be completed within 1
minute.
3 Handset:
Press {OK}, then wait until a beep
sounds.
4 {OFF}
Registering an additional handset
See page 5 for information on the
available model.
Start from step 2.

Dec 29, 2008 | Panasonic KX-TG5632 Phone

1 Answer

Talking Caller ID


This is from the manual on pages 25/26. After the info below is the link to the manual.

1
{MENU} i {#}
2 Enter the desired feature code.
3 Enter the desired setting code. i {Save}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.

Talking
CallerID
(Handset)
{1}{6}{2} {1}: <On> {0}: Off

Talking
CallerID
(Base unit)
{*}{1}{6}{2}
{1}: <On> {0}: Off

http://service.us.panasonic.com/OPERMANPDF/KXTG9331.PDF

Oct 24, 2008 | Panasonic KX-TG9331T Cordless Phone

2 Answers

Model#kx-tg6071b when talk button is pushed, screen shows" no link to base move closer, try again". That is what appears on both handsets.


Press MENU, scroll down to INITIAL SETTINGS (press select), scroll down to REGISTRATION (press select), then select HS REGISTRATION, and follow the instructions on the handset screen. This is for the KX-TG6071B, but is similar for most Panasonic Cordless phones. That will link the handset to the base, and YOU MUST DO IT WITH EACH HANDSET.

Jun 22, 2008 | Panasonic KX-TG2313 Cordless Phone

3 Answers

KX-TG6052 two handsets. Can't get Talking-Caller ID to turn off!


to turn the talking caller id off go to the menu press 0 then * then 4, then press 0 again to select off.

to turn the ringer on the handset back on, go to the menu, prees 1, 1, then press 1 for a low ringer, 2 for medium and 3 for high.

Mar 15, 2008 | Panasonic KX-TG6052B Phone

Not finding what you are looking for?
Panasonic KX-TG1033S Cordless Phone Logo

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Phones Experts

kakima

Level 3 Expert

96576 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

guyvstewart

Level 2 Expert

82 Answers

Are you a Panasonic Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...