Question about Kodak EASYSHARE 5500 All-In-One InkJet Printer

1 Answer

My kodak 5500 will not turn on. I worked one day and now it gets no power. The light is green on the cord. The lights come on for a second and then go out. The screen will not come on anymore. I have had to replace the print head twice! What is wrong with these printers!

Posted by on

  • Anonymous Jan 03, 2009

    i had the sam e problem with my and ended up calling the kodak company and now they are going to send me another one, because the one i had did not work, correctly-try calling them

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 60 Answers

Make sure the power cable is plugged into the power outlet directly and not to any power strip or surge protector......if still the same issue then call tech support and printer would be replaced without any charge if its in warranty........warranty is for one year from the date of purchase.......

Posted on Jul 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i plug in the power cord in the back of the peinter the green light turns off. the printer will not turn on


It is a clear issue with the power cord and the printer.

You can get the power cord replaced free from Kodak.

As far as the printer goes, you can check with Kodak about the warranty period.

Oct 07, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Pictures are green and yellow


Try this one Take out the inks and printhead Leave the cartridge door open, then unplug the power cord from the back
of the printer while the access door is open Close the cartridge door once the cord is unplugged Reconnect the powercord, turn on the printer, then your printer will
look for your printhead "Printhead missing or not installed
correctly..." Then put everything back. make sure it will snap in to place. Then
print a calibration page, then scan it. This is just over writing the
error message. Thanks Josh - Kodak Tech Support

Aug 05, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

2 Answers

Paper jam error light on kodak esp 5


  1. Remove the paper tray.
  2. Disconnect the power cord, wait 5 seconds, then reconnect the power cord.
    NOTE: The printer will reset and eject the paper. If the paper does not eject, try to remove it manually.
  3. Replace the paper tray.
  4. Press the Print button on the printer to resume printing.

Apr 01, 2009 | Kodak ESP 5 Printer

1 Answer

Kodak esp 5 printer wont turn on


Make sure that you have green light on the power cable, which goes to the back of the printer. if it is not lit up,the power cord is bad.If you have light there and the printer is still not turning on,make sure that the power cable is inserted properly to the back of the printer. is still issue is not resolved, call kodak @ 1800 421 6699 and they will replace the printer for you free of cost.

Mar 23, 2009 | Kodak ESP 5 Printer

1 Answer

Cannot get machine to callibrate


unplug the power from the back of the printer, wait 15 seconds and then plug it back in for a reset, Rob

Feb 18, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

2 Answers

5500



This error message indicates that a problem occurred with the scanner. To resolve this error condition, do the following:
  1. Turn off the printer, then disconnect the power cord.
  2. Wait 30 seconds, then connect the power cord.
  3. Turn on the printer.

May 13, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

2 Answers

Kodak 5500 All in One Printer


Error code 3809 refers to the printhead. You may try reinstalling it to make sure that is not the problem. Take it out, reinstall it, disconnect power cord from back of printer and wait for 2 mins. Then, re-connect power cord and wait until the memory card and photo tray lights go off. Turn printer on. If not solved, contact support

May 11, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Kodak 5300 Power


talked to kodak servcice and they are sending replacement.

Apr 27, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

2 Answers

New kodak easyshare5500


Maybe you can re-stall / go to start /control panel /go to add remove , find Kodak Easyshare remove and ...restart your computer and re-install the cd's to the Kodak Easycare, Dont for get to re-boot at any time you install any cd's that came with your computer.

Nov 27, 2007 | Kodak EASYSHARE 5500 All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5500 All-In-One InkJet Printer Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Printers & Copiers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...