Question about Siemens 24 in. SE64A630GB Built-In Dishwasher

Open Question

At the end of the cycle, the machine starts bleeping

This has only started since the engineer replaced the control board

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Ajkill
  • 2035 Answers

SOURCE: Siemens full-integrated Dishwasher SE65E330EU: Dispenser cup opens after 10 sec

This is the problem with control panel if its within warranty get it serviced by the company and if you want to buy the parts for dishwasher you can use this link:


https://www.siemens-eshop.com/eshop(bD1lbiZjPTAwOQ==)/siemens/gb/prodp.htm?prod=SE65E330EU%2f23



Good luck...

Posted on Aug 12, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my machine go straight to no spin and end cycle. When I try to start it


faulty timer or control board
switch of at the wall
try to start a new wash cycle

if no better it will be that timer or control board

Jul 29, 2016 | Washing Machines

1 Answer

When using the dryer it stops working and bleeps saying e10?


From Sears' site: Unplug the dryer for 5 minutes to reset the control board. Plug the dryer in and start a cycle. If the code appears, replace the electronic control board.

Mar 10, 2015 | Washing Machines

3 Answers

Can't get a Bosch MAXX 5 WAA24161GB to start. Changed fuse and socket, but machine still won't work?


hello, have you checked the glass fuse inside the washer make sure you use the same rated fuse the value will be on the end of the fuse hope it helps


regards
shaun

Mar 06, 2011 | Bosch Washing Machines

1 Answer

Washing machine error code F1 bleeping this shows up after selecting power and start AND in mid cycle with approx 20 minutes left... the washer does work if you hit stop start stop start stop start up to...


The F1 error code on this washer indicates a Primary Control Board failure.



It is likely that the machine control board will need to be replaced to correct this problem.



The part number for the machine control board is undetermineable because you have not provided me with the exact model # of your washer.



The procedure for replacing the machine control board is provided HERE

LINK: http://media.fotki.com/1_p,wfgstgtftbtkrrdxgtqsskgwtqkq,vi/gfsfgfsgqxgfqtqtgwf/1/1303472/5961857/image55806img-or.gif



NOTE: Be sure to unplug the washer to disconnect electrical power before accessing internal components.



There is a slight possibility that a problem with the pressure switch hose could be causing this problem.

A pinched or twisted air hose can cause this fault code.

When you open the console, check the air hose connected to the pressure switch on the machine control board.

If it is pinched or crimped, I recommend rerouting the hose to resolve this problem.

This may fix your problem without replacing the control board.



NOTE: You may want to check for this condition before ordering the control board. Most electronic control boards cannot be returned for a refund or credit.



If you find no apparent problems with the air hose on the pressure switch, then replacing the machine control board on this washer should correct your problem. There is a risk involved in replacing this part yourself.

As noted above, you could have a problem with the air pressure hose that is not apparent upon your initial inspection. A service technician would normally need to properly and thoroughly diagnose this problem before replacing the control board.





Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question!!!!

Feb 16, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Washing machine zanussi 1600


Most likely you need to replace the timer.

Aug 21, 2009 | Washing Machines

1 Answer

F1 error message wash cycles and rinse cycles


The F1 error code on this washer indicates a Primary Control Board failure.



It is likely that the machine control board will need to be replaced to correct this problem.



The part number for the machine control board is undetermineable because you have not provided me with the exact model # of your washer.



The procedure for replacing the machine control board is provided HERE

LINK: http://media.fotki.com/1_p,wfgstgtftbtkrrdxgtqsskgwtqkq,vi/gfsfgfsgqxgfqtqtgwf/1/1303472/5961857/image55806img-or.gif



NOTE: Be sure to unplug the washer to disconnect electrical power before accessing internal components.



There is a slight possibility that a problem with the pressure switch hose could be causing this problem.

A pinched or twisted air hose can cause this fault code.

When you open the console, check the air hose connected to the pressure switch on the machine control board.

If it is pinched or crimped, I recommend rerouting the hose to resolve this problem.

This may fix your problem without replacing the control board.



NOTE: You may want to check for this condition before ordering the control board. Most electronic control boards cannot be returned for a refund or credit.



If you find no apparent problems with the air hose on the pressure switch, then replacing the machine control board on this washer should correct your problem. There is a risk involved in replacing this part yourself.

As noted above, you could have a problem with the air pressure hose that is not apparent upon your initial inspection. A service technician would normally need to properly and thoroughly diagnose this problem before replacing the control board.





Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Jun 28, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

2 Answers

Child lock and spin/end lights on and stuck need to reset


Hard Reset - In some cases the control can be non-functioning or may not accept activation from the control panel. To clear and restart the control follow the these steps:

* Unplug or turn the circuit breaker off for 30 seconds.
* Reconnect the unit to the power source by turning the breaker back on or plugging the unit back into the wall outlet.
* Press the Pause/Cancel/Stop button twice to clear the "PF" in the display.
* Start a short cycle to check the operation of the machine by selecting a cycle and pressing and holding the start button until the machine starts.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Apr 12, 2009 | Washing Machines

1 Answer

Starts bleeping 10mins into cycle


http://www.manualnguide.com/dl/12334/ Check on the troubleshooting page as to what certain flashing sequences mean and that may help

Jan 08, 2009 | Baumatic 23 in. BDW5 Built-in Dishwasher

1 Answer

SMEG DI 612CA. Dishwasher


Pisss!!! Comin from my asss!!

Mar 04, 2008 | Smeg Dishwashers

1 Answer

Ignis dishwasher model no. adl 347


I have the same problem. Having spoken to an engineer I have been told that the controller has gone. £120 for a new one plus fitting. So you are looking at a £200 bill to repair. Not worth it ???

Jun 14, 2006 | AEG 24 in. Favorit 40310 Free-standing...

Not finding what you are looking for?
Siemens 24 in. SE64A630GB Built-In Dishwasher Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

valuesrespec

Level 2 Expert

89 Answers

aliasger yq

Level 2 Expert

218 Answers

Are you a Siemens Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...