I have a Meridian M7324 telephone and would like to know how to change my display name on internal calls within the office. I am unable to find a memory button for my own phone. Thank you for your time and help.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
AvayaNORTEL NETWORKS is a trademark of Nortel Networks. ... All other trademarks and registered trademarks are the property of their ... One-line and two-line displays . ...Memory buttons . ... Call anomalies for telephones without line buttons . .... Select how you dial your calls . ... Receive a busy signal on an internal call .
Nortel Networks Meridian Norstar How to program voice mail phone feature codes ...Modular ICS KSU must be programmed with an M7310 or a M7324 telephone. ... Lift handset, press Voice Call key or press the Feature button, then press 66 2. .... At the LOG: prompt, enter your mailbox#(extension #. and your password all ...
Have you misplaced your Nortel M7324 Telephone User Card Manual?
Would you like a digital, searchable, pdf version of the Nortel M7324 Telephone User Card Guide? Follow this link (& click FREE) to download a pdf version of the Nortel M7324 Telephone User Card manual.
Programming is done on M7310, M7324 and T7316 sets. To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344. The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming. At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you wish to program ringing on. Press the show key (top right arrow) The display should sat LINE ACCESS Press the show key (top right arrow) . The display should say LINE ASSIGNMENT. Press the show key (top right arrow) . The display ask for a line number. press list The display should say line 001: appear& ring
press the Chng key till it says appear only press next key (lower right arrow)
The display should say line 002: appear &ring repeat the procedure the same as line 001 for the remaining ringing lines
Programming is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344. The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming. At the terminals&sets prompt, press the show key (top right arrow).
The display should now ask for an extension number. Enter extension number you want to change the name on. Press the show key (top right arrow) The display should say LINE ACCESS Press the next key (bottom right arrow) . The display should say CAPABILITIES. Press the next key (bottom right arrow) . The display say Name. press the Chng soft key. use the dial pad to enter the name. advance using the arrow soft key to go to the next letter ex. Bill = 2,2 -> 4,4,4 -> 5,5,5 -> 5,5,5 Press the next key (bottom right arrow) to enter the name. Press the release key when finished
1. Press the Rls button then ** FEATURE 266344 (CONFIG)
2. Password is 23646 (ADMIN) The display reads Terminals & Sets
3. Press SHOW ans enter the Extension for which you want to enter a name.
4. Press SHOW, again
5. Press the NEXT key until the display reads NAMES at the top left corner.
6. The bottom right corner reads CHANGE, press the far right soft key.
7. To move from one letter to the next use the far right and far left soft keys or the # key.
8. When you are finished Press next.
9. Press the HEADING key to get back to TERMINALS & SETS and start again!
Navigation Keys: Line 1 = HEADING Speed Dial = SHOW
Line 2 = BACK Last No. = NEXT
This can only be done from the main handset and only one at a time. The Soft Keys are the three small buttons right bellow the screen.
try this website. You need to first release all the calls, then do Feture **ADMIN or **23626 ... that should get you into the system, I'm just having trouble because my office phone won't let me enter the password once i'm in. The password should be ADMIN or 23646 as well.
If you have a different phone, try Feature **CONFIG or **266344 and play around with it from there.