Question about Electric Razor Pocket Rocket Ride-on Motorcycle

Open Question

Need wiring diagram for a razor pocket rocket

I just bought a razor pocket rocket for my son off craigslist and one of the wires from the charging port is missing and i don't know where it is or where it goes, please help before i do launch it like a rocket

Posted by on

2 Suggested Answers

  • 532 Answers

SOURCE: We purchased a multi-launch sky

Hi,

It will better to get the manual so that it will help you a long way.

To download this manual go to the website listed below.

Target.com/Freeonline
512k - 73 sec @ 56k
skylighter.com

thanks

Posted on Jun 20, 2010

  • 1 Answer

SOURCE: i got a razor pocket rocket and my back wheel blew

Replacing the rear tire is a real nightmare.....you are much better off purchasing the entire rear wheel assembly which you can do from the Australian distributors Funtastic for only about $10-$15 more than if you just bought the tire.

To replace the tire you need to use a bench vice which a couple of bolts clamped into it to hold the hub in place.....you then need to remove the sprocket assembly which is a reverse thread......i had to use a hammer and a large flat head screw driver wrapped in a rag so as not to tear up the teeth.

Once you've loosened the sprocket assembly you have to undo the bolts the hold the two sides of the wheel together and the tire will come right off.

All of this would be totally unecessary if they used a tire that you could remove just like any other mini motorcycle tire.

They don;t and so it is what it is.

As I said, next time just buy the whole assemble and then it's very straight forward.

Hope that helps!

Posted on Feb 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does switch need to be on when charging a razor pocket rocket?


No. The switch should be off before connecting the charger.

You can download a manual from Razor here...
http://www.razor.com/customer-care/owners-manuals/

Jul 14, 2014 | Razor E100 Electric Scooter

1 Answer

How do you charge a razor pocket mini motorcycle


You use the supplied charger, or if you got it used without a charger, you can buy one here: Replacement Razor Pocket Rocket PR200 Scooter Battery Charger Adapter... After that, you plug the charger into the wall securely, and pull down on the round cover next to the motorcycles power button until it opens. Then plug the other end of the charger into the motorcycle.

Jun 21, 2014 | Electric Razor Pocket Rocket Ride-on...

1 Answer

Razor pr200 pocket rocket. the tire is moving when i lift it up but when i sit on it it wont move


#1 check your power voltage on your batteries #2 you need to check the power to the electric motor - #3 possibly replace the control module - #4 possibly replace the throttle

Sep 06, 2013 | Electric Razor Pocket Rocket Ride-on...

1 Answer

Switch is on and red lite is on but will not run.


Use an allen wrench and remove the seat. check to see all the wiring connectors are joined to each other properly.

Dec 28, 2010 | Electric Razor Pocket Rocket Ride-on...

1 Answer

No power on back wheel just a red light on the off and on switch


try unplugging the brake wires. if this does not work, it is prob. your throttle.

Aug 05, 2010 | Electric Razor Pocket Rocket Ride-on...

2 Answers

I got a razor pocket rocket and my back wheel blew up. i have the replacement but i dont know how to do it pls help


Replacing the rear tire is a real nightmare.....you are much better off purchasing the entire rear wheel assembly which you can do from the Australian distributors Funtastic for only about $10-$15 more than if you just bought the tire.

To replace the tire you need to use a bench vice which a couple of bolts clamped into it to hold the hub in place.....you then need to remove the sprocket assembly which is a reverse thread......i had to use a hammer and a large flat head screw driver wrapped in a rag so as not to tear up the teeth.

Once you've loosened the sprocket assembly you have to undo the bolts the hold the two sides of the wheel together and the tire will come right off.

All of this would be totally unecessary if they used a tire that you could remove just like any other mini motorcycle tire.

They don;t and so it is what it is.

As I said, next time just buy the whole assemble and then it's very straight forward.

Hope that helps!

Oct 10, 2009 | Electric Razor Pocket Rocket Ride-on...

Not finding what you are looking for?
Electric Razor Pocket Rocket Ride-on Motorcycle Logo

Related Topics:

1,219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electric Dolls, Playsets & Toy Figures Experts

Brad Brown

Level 3 Expert

13531 Answers

Tom Chichester

Level 3 Expert

24540 Answers

 Russ Hill
Russ Hill

Level 3 Expert

2024 Answers

Are you an Electric Doll, Playset and Toy Figure Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...