Washing Machines Logo

Related Topics:

A
Anonymous Posted on Oct 24, 2012

SAMSUNG WF328AAR/XAA WONT PUMP ALL THE WATER OUT

1 Related Answer

Paul

  • 381 Answers
  • Posted on Dec 23, 2009

SOURCE: HAVE LE CODE ON SAMSUNG WF316LAS/XAA WASHER LE CODE AND BEEPS

LE is a water level issue.


- The part of the hose where the water level sensor is
located is damaged (punctured).
- The hose is clogged with foreign material.
- The hose is folded.
- Too much lubricant has been applied to the insertion
part of the air hose.
- Hose engagement error (disengaged)
- Part fault (Faulty internal soldering)
- The water level sensor terminal is disengaged.
- Main PBA fault.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

On Samsung RF265ABPN Refrigerator needs JUST mechanical portion. Label on unit shows: Sankyo NTGN016TD1/Code No. DA97-05037A. Is this part avail & where, or do I have to buy the entire ice maker unit?

Here are all the available parts

https://www.searspartsdirect.com/model/2sbfuo92w6-001482/samsung-rf265abpn-xaa-00-bottom-mount-refrigerator-parts?page=2

Or from Samsung direct

RF265ABPN - Original Samsung Parts & Accessories and ...

www.samsungparts.com > RF265ABPN > XAA > Default
This is the one and only genuine Samsung Aqua Plus water filter. For guaranteed performance, purchase only authentic Samsung water filter DA29-00003G ...

- Original Samsung Parts & Accessories and Products

www.samsungparts.com > ExplodedView > XAA
Model #: RF265ABPN ... Exploded View & Parts List ... on the image and the number in the parts list are exactly same, and check the part description carefully for ...
..
0helpful
1answer

Samsung wf306law/xaa Had a ND code. drained lines, pump etc. But won't Spin, nor do i get a error code.

If all of the water has been drained from the washer, check the hose to the water level sensor is not plugged. You can find information on the nd error code here

https://appliancerepairinfo.com/samsung-washing-machine-nd-code/
0helpful
1answer
1helpful
1answer
0helpful
1answer

Samsung wf337aal/xaa wont pump out water

I have the same washer..same problem..pump tested ok on the bench when connected to power. All lines r free from any obstruction. Any clues r much appreciated.
0helpful
1answer

Samsung washer ND code and not drain and spin

Sounds like control Board isn't sending voltage to pump. Most likely a control issue.
0helpful
1answer

How do i remove the top so i can see were the leek is at on my samsung model # wf328aar/xaa

There are screws that are located in the back of the machine at the top that hold the top on and pushes it forward. Remove these top screws and slide the top back then lift up.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_4570d45317834dd3

0helpful
1answer

Hello i have a samsung washer model# WF306BHW/XAA and will not drain the water i check the pump and is clean and it works ! what cut be wrong?

if the pump is clean and the motor works,it could be a blockage in the outlet pipe or the impeler in the pump is damaged,make sure there is some water in the machine, take the end of the oulet pipe and hold it over a bowl of some description if theres no blockage water should cone out of the pipe.if do not then its blocked,if it does then the pump is probably damaged.
0helpful
3answers

Samsung lnt 4665fx/xaa lcd wont turnon just makes clicking sound

Sounds like the power supply board has failed, VERY common problem. You can call 1-800-samsung for the nearest service center.
Not finding what you are looking for?

126 views

Ask a Question

Usually answered in minutes!

Top Samsung Washing Machines Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Are you a Samsung Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...