Question about Welding Tools

Open Question

Where can I Purchase New Decals and Paint for the Hobart 16 Champion Welder?

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: I have a Hobart 135 Handler wire feed welder that

Get a volt meter, go to ohms setting , check transformer to ground for low to zero ohms reading. also look closely at transformer windings for foreign objects in between them, never know what you my find. If transformer is shorted to ground probably time to say some nice words over it before burial. Also just for kicks try a new gun on it, (there is a reason i'm asking you to do(this) see if you can find someone that has spare. A good honest repair shop would probably be reasonable if all else fails. to a least let you know if the transformers a problem. good luck

Signed
Former Miller Certified Tech.

Posted on Aug 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need Q1 transistor for 135 hobart welder


The transistor is mounted on the main circuit board, you cannot buy the part from Hobart or Miller, they only sell the complete circuit board.
If you can read any part numbers from the transistor you can purchase the part from a electronic parts supplier.

Jul 13, 2014 | Hobart Handler 140 Mig Welder

1 Answer

I have a champion 10000 watt gen welder won't bur


Make sure the switch for remote power or control at machine is on the right setting. It will arc but very faint if this switch is not on the right setting.

Mar 17, 2012 | Hobart Welding Tools

1 Answer

I have a hobart champion 16 and it will barely arc it will not make a weld it went from welding fine to doing this.


Could be something as simple as worn brushes, dirty slip rings, or a bad bridge rectifier. If you know how to check them, these are all something you could fix. If it's anything beyond those, you're best bet would be take it to a repair facility. I repaired welders for 18+ years. (just an FYI)

Jan 04, 2011 | Hobart Welders 500545 Champion Elite 11000...

1 Answer

I have welder Hobart Champion 10,000. I need an electronic board. The welder doesn't send electricity


It looks like Hobart made 3 different versions of the 10,000. If you go to their website and enter the model # (and serial #), you can download the exact owners manual with complete parts listing (according to their site). The website is: http://www.hobartwelders.com/service/owners-manuals

The part should be available from them..or with the part number, you can google it and see what is out there in the secondary market.

Hope this helps

Jul 24, 2010 | Hobart Welders 500433 Champion? 10,000...

1 Answer

I have a Hobart Champion 10,000 welder generator. It runs but I am getting no juice out of it. Won't weld or put out power to run anything.


measure ouput on ALL available sockets - anything?
Take cover off electric motor-generator, visually inspect windings.
Measure continuity of all stator windings (2 or 3 points usually)
Measure continuity of stator thru brushset.
If all measures ok - has to be AVR module.

There is no mistery in generator - just stator to induce and rotor to obtain voltage.

Jan 01, 2010 | Hobart Champion 10,000 All-in-One...

Not finding what you are looking for?
Welding Tools Logo

Related Topics:

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Welding Tools Experts

Brad Brown

Level 3 Expert

15557 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Bill Boyd

Level 3 Expert

42042 Answers

Are you a Welding Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...