Question about HP (DY674A) for dx6100 dc7100

1 Answer

HP dx6100 making beeping noise and read light flashing? Is Mobo faulty or is it the power suppl? Please help!!!

Posted by on

  • 2 more comments 
  • yanni854 Mar 11, 2009

    I have the same problem, however I don't get a post screen or any screen at all.

    Please advice. What should I do?


  • albolegend Mar 14, 2009

    HAVE BOTH dx6100 dc7100 AND THEY HAVE 5 LONG BEEPS AND BLINKING RED
    THERE'S NOTHING DISPLAES ON THE SCREEN
    HAVE TESTED THE POWER SUPPLY AND MEMORY ON SEPARATE COMPUTERS AND ARE WORKING
    PLZ HELP!!!!!!!



  • Anonymous Apr 08, 2009

    Beeping 3 Long beeps

  • veenstrajim May 11, 2010

    on most computer systems the beeps are codes so you need to listen short and long beeps something like mores code



    the codes are different by manufacturer



    if you haven't played inside at all chances are it is your video display do you get a post screen or any screen??



    if you do when you reboot hit esc or F8 to get into cmos this is the brain of your motherboard

    there will be an area that says set default settings

    usually a choice for perfomance or stability

    arrow down to stability hit enter

    hit F10 to save --- yes



    this has reset your system to basic operations with all motherboard parts working

    let reboot happen if beeps continue

    count types and numbers then search web for beep codes on computer some are standard some are not hp support may have this problem on their help files if it is common

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 818 Answers

The problem can be the power supply, can be some powder into, can you clean it?. after if there is noise, you must change it.

Posted on Jan 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Faulty warning flashed and beeped, side light and fog lights faulty, but all are working how can I stop this and switch off the warning and bleep noise driving me mad on citroen c3 2006


That is a very rare car these days. I would go to a Citroen forum like this one to ask the question plus find lots of other information.
http://citroenc3owners.com/citroen-c3-help/

May 11, 2014 | Vehicle Parts & Accessories

1 Answer

Dc 5000 sff. wont power up. green light on motherbd flashes. if power on button is pushed, the front green led blinks too. I have replaced the pwr supply w/no change.


make sure both the 4 pin and 20 pin connectors are firmly installed. if the mobo light flashes how many times does it flash, do you hear any beeps?

May 10, 2012 | HP Compaq dc5000 PC Desktop

1 Answer

Have 9 long beeps. powers gets through,but then gets cut (hp dx6100) no display pls solve problem The beeps are telling you that it has no video, when cpu is starting, go in to


Hi,
Check the power connections.
You may need to open the desktop to access the RAMS.
Remove them and re- fix them making sure they properly fit into their slots.
Remove the hard disk and re-fix it too.
Now power up the PC.


Hope this helps.Thanks!
Please rate this answer.

Oct 20, 2011 | HP Compaq dx6100 PC Desktop

2 Answers

Laptop does not start!!!! Hi, I have a problem that maybe you can help me with. I have a HP Pavilion tx-2510us, I turned it off and now it just refusses to start. I tried several different ways of...


yes, we have like 1000000000 posts here, LT does not start.
endless it is.... and few come backs, to show whats up.
its always the same reasons, short list.

Ok, not on time did you say the word BIOS>
did you know BIOS works with HDD/SSD removed
forget the OS for now,
if the BIOS ok called up the screen is ok
if not, then its a catastrophic failure.
you can even boot it with external, screens, 15pin pin VGA.
if not its DEAD if BIOS IS DEAD, that is a clear 100% dead
with battery out.,
so the power pack is bad.
ever consider that, i keep them as spares, so if on say vacation
mine blows out, i have a backup.

with a good power pack
the MOBO will work
and will beep if you remove RAM.
with special beeps, beeps are BIOS code running,...
if it cant beep the MOBO is toasted.

I uses a voltmeter on the rear of the power jack
19vdc is spec (the pack side tells you that in clear text)
ok its got power. (even with power button pushed)

ok power good, push power botton
and i must get beeps BIOS
one or the other, even with

here are the LED flash codes on my hp 8540.
hp.com has yours too, if you RTM ,read the service manual. for free

nice how fixya wrecks photos. sad
the blinks mean,
gpu dead
bios dead
cpu dead
ram dead
and more, this laptop dont beep it only blinks
so you must read the book to learn what YOURS does.



blink1-f2pntdp44mjusq0choqk2alv-3-0.jpg

true-blinks-f2pntdp44mjusq0choqk2alv-3-1.jpg

Mar 13, 2017 | HP Pavilion TX2510US Notebook

1 Answer

I have a dx6100 which does not boot because of the red light that keeps on beeping.


sounds kinda like a memory shut down code beeping or hardware shut down take side off and start unplugging hardware devices 1 at a time and try rebooting until it starts up

1st take memory sticks out and just put 1 of them back in a slot at a time and see if it will boot

Jan 12, 2011 | HP dx6100 (PE280ETABB) PC Desktop

1 Answer

Have 9 long beeps. powers gets through,but then gets cut (hp dx6100) no display pls solve problem


The beeps are telling you that it has no video, when cpu is starting, go in to bios settings and change vga mode to on board, this way you can manually install drivers for external video card if nescessary.

Mar 06, 2010 | HP (DY674A) for dx6100 dc7100

1 Answer

Hp zv6000


There should be a light on the board when you plug it in. something's wrong though if it wont turn on. if the water damage is recent, you could dip it in isopropyl alcohol and then dry it, which might fix some of the shorts, but most likely it's dead.

Sep 11, 2009 | HP Pavillion ZV6000 Athlon 64 3500+ 15.4in...

5 Answers

It doesn't start up, only beeps and red light flashes


pls try to use another compatible memory stick.

then confirm the status of your micro processor

Apr 21, 2008 | HP Compaq dc7100 Ultra-slim PC Desktop

Not finding what you are looking for?
HP (DY674A) for dx6100 dc7100 Logo

Related Topics:

1,536 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Televison & Video Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Tony

Level 3 Expert

2598 Answers

Are you a HP Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...