Question about PC Desktops

1 Answer

My intel motherboard model no.is D845GVAD2 AND I WANT TO KNOW THAT HOW MUCH RAM IT SUPPORT

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 186 Answers

That motherboard has 2 DIMM sockets. Each socket is capable of handling up to 1 Gb of 2.5V 184-pin DDR SDRAM DIMMs for a total of 2 Gb on the board. Please note that this board does not support double sided x16 DIMMs. Do NOT use ECC DIMMs on this board as it will cause damage.

Posted on Jan 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dc5100 processor upgrade


NO!

Two Netburst based Processor cores on the SAME chipset?

Get outta' here!

When did they come up with that?





OH, I'M JUS KIDDIN'!

http://h18000.www1.hp.com/products/quickspecs/12145_na/12145_na.HTML

The HP Compaq dc5100 Desktop PC uses an Intel 915GV motherboard chipset.

Since we know that the Northbridge chip, of the motherboard chipset; handles the Faster capabilities of a computer;
i.e., Processor, Ram Memory, and HIGH-speed graphics; let's look at the Intel 915GV chipset,

http://en.wikipedia.org/wiki/List_of_intel_chipsets#Pentium_4.2FPentium_D.2FPentium_EE_chipsets

No sir/ma'am.
The Intel 915GV motherboard chipset only handles Single Core processors;
Intel Pentium 4,
and,
Intel Celeron,
and,
Intel Celeron D.
(With a 533MegaHertz Front Side Bus, or an 800MHz FSB)

The Celeron D is NOT a dual core processor,

http://en.wikipedia.org/wiki/Celeron#Prescott-256

"The D suffix actually has no official designation, and does not indicate that these models are dual-core. It is used simply to distinguish this line of Celeron from the previous, lower performing Northwood and Willamette series, and also from the mobile series, the Celeron M (which also uses 3xx model numbers) Unlike the Pentium D, the Celeron D is Not a dual core processor."

Yeah, I know. I'm just a 'Ray of Sunshine'.

You know you can pick up a motherboard pretty cheap nowadays, that WILL support the lowly Pentium D, for not much money.

Problem is you will need to replace Ram Memory also.

By the time you get a motherboard chipset that supports dual core Processors (CPU), you are going to be using DDR2 Sdram ram memory, instead of the DDR Sdram ram memory you are using now.

OK, Motherboard, CPU, and Ram Memory.

Oh, the Power Supply. Won't do either.
240 Watt unit, or 300 Watt unit?

Sure.............OK.

Back in the day those Power Supply's were made, Power Supply manufacturer's were 'fudging' the actual maximum rated Wattage.

True Wattage was more like 60 to 70 percent of what was stated.
Why?
SOLD more Power Supply's.

240 Watts?
Simply divide by 10. = 24.
For 60 percent, take 60 times 24. = 144 Watts
70 percent? 168 Watts.

300 Watts?
60 percent is 180 Watts.
70 percent is 210 Watts.

I wouldn't try to run a Barbie doll with that low a Wattage, of Power Supply. (Barbie doll? What?)

Need at least a decent 350 Watt power supply, from today's manufacturers.
80 percent constant duty cycle, for most good units; or higher.

So...............
Max out the Intel Pentium 4 CPU.

4GB's of 533MHz DDR Sdram ram memory.
(PC4200, or PC4300. Depends on the manufacturer as to how they name it)

By the time you spend that much money, you may as well buy another Motherboard, Processor, Ram Memory, and Power Supply.

Yes, may as well buy a better computer.

I know. Quit trying to cheer you up.

Around here we have Craigslist, and Ebay, for two places.
Could pick up a better computer, for around the same money, as you would pay for all the upgrade parts above.

Which is better? Upgrade the Processor, or upgrade the Ram Memory/
For the better 'Bang for the Buck', upgrade the Ram Memory.

The CPU (Processor) has a built-in cache.
L1 cache, and L2 cache. (Newer CPU's have an L3 cache)

The Cache is a small memory area for the CPU.
It is the FIRST memory area the Processor (CPU) reads.
This is because it operates at the same frequency rate, as the CPU does.
(Frequency rate = 'Speed'. Operates at the same 'Speed')

Next inline is the Ram Memory.
Ram Memory -> typically, operates at half of the Processor's Front Side Bus. (FSB)

This is why upgrading Ram Memory is a good idea.

It isn't so much of getting Ram Memory, that operates at a higher frequency rate ('Speed'), as it is to have MORE ram memory.

Example;
PC3200 compared to PC4200.
4GB's of PC3200 is better than 2GB's of PC4200.

(DDR Sdram at 400MHz = PC3200)

Moving on............

Motherboard chipset:

Chip and Chipset are slang terms for I.C.
Integrated Circuit,

http://en.wikipedia.org/wiki/Integrated_circuit

The motherboard chipset for your computer, consists of a Northbridge chip, and a Southbridge chip.

{Motherboards that support the Intel Core i technology, (Core i3, Core i5, Core i7, etc), do NOT use this motherboard chipset technology. Neither do some of the AMD CPU's }

http://en.wikipedia.org/wiki/File:Motherboard_diagram.svg

As stated previously, the Northbridge chip handles the Faster capabilities of a computer;
Processor (CPU), Ram Memory, and HIGH-speed graphics.

The AGP technology, and the PCI Express technology; ARE high-speed graphics.

Using a graphics card in a PCI slot, or using Integrated Graphics; is NOT high-speed graphics.

The slower capabilities of a computer are handled by the Southbridge chip.
1) PCI Bus / Integrated Graphics.

(Another term for Integrated Graphics, is OnBoard Graphics. A term that seems to have gotten lost.
It explains better; ON the motherBOARD )

2) IDE Bus
3) SATA Bus
4) USB Bus
5) Ethernet
6) Audio (Sound)

Point?
Look to see what the Northbridge chip is, as I have shown you; and you'll get a good idea of what Processor (CPU) support is.

For additional questions please post in a Comment.

Regards,
joecoolvette

(I get tired of looking on websites, that just say NO, and do not explain why )

Mar 06, 2013 | HP Compaq dc5100 PC Desktop

1 Answer

I want to intel D845GVAD2 this model number chipset


Here is a link to the driver (from the intel web site)
I assumed this is for a Win XP computer; If you are using something older than win XP. there is a driver for Win 98 and Win 2K.
If you are trying a newer version of windows, there may be an issue, since intel does not offer support for Vista or Windows 7 for this chipset (it is pretty old).
That being said, there may be a basic driver for this chipset in Windows, or you could always add a graphics card to gain better functionality.
I hope that helps, and good luck!

Aug 04, 2012 | PC Desktops

1 Answer

Fiteed new quad core CPU and 4gb of Ram, when started up getting no signal detected on the monitor. Can anyone help?


Let's back up a second.

A) What HP model is it? (P/N. Product Number. Back of desktop computer tower)
B) What model number of Intel quad core is it?
C) What are the manufacturer ID number/letters on the ram memory module/s?

I need to know what Northbridge chip is used on the motherboard, to know if it will support the particular Intel quad core you're trying to use.
This I can hopefully obtain from HP Support, by looking at the specifications for the motherboard.

(This technology does not apply to motherboards that support the Intel Core i3, Core i5, Core i7, and Core i9 processors)

The Northbridge chip is part of the motherboard chipset.
So aptly named, because on a desktop computer motherboard it sits to the 'North', for one.
(Under the Processor)

[ Chip and Chipset are slang terms for I.C.
Integrated Circuit,

http://en.wikipedia.org/wiki/Integrated_Circuit

The Northbridge chip handles the faster capabilities of the computer.
It handles the Processor, Ram Memory, and High-speed graphics.

AGP and PCI-Express are high-speed graphics technology.
A graphics card plugged into a PCI slot, and Integrated Graphics, is Not high-speed graphics.

The Southbridge chip handles the slower capabilities of the computer.

Motherboard Diagram;

http://en.wikipedia.org/wiki/File:Motherboard_diagram.svg

List of Intel Chipsets, and more specifically the one's that can handle Intel quad core processors,

http://en.wikipedia.org/wiki/List_of_Intel_chipsets#Core_2_chipsets

Secondly;
Make sure the Ram Memory you installed is Compatible.
If the motherboard supports 4GB of ram, make sure it is in the correct ram slots if using two sticks of ram, or four sticks.

There HAS to be a ram memory module ('Stick') in Slot 1. (DIMM 1)
EACH ram memory slot has a Maximum Amount.

For example if there are 4 ram slots, and the Maximum Total Amount of ram memory is 4GB, each ram slot may have a maximum of 1GB.
It may, or may not be that you can use Slot 1 and Slot 2, and use two 2GB sticks.

Third:
Always go slow when upgrading.
Install the Processor first, boot the computer up, see how it works.

THEN shut the computer down, unplug from power, observe Anti-Static Precautions, and install 2GB of ram memory.

Works?
Install the other 2GB.
BIOS has to recognize the changes.

Fourth:
Are you sure your Power Supply is adequate to support the quad core, and the added ram memory?

Post back in a Comment.

Regards,
joecoolvette

Jul 24, 2011 | HP PC Desktops

1 Answer

I am planning to buy desktop with i3 processor, I want to know whether intel original motherboard will be best for i3 or Asus or some other brand i can look for.(please suggest).Also which intel's...


You normally cannot swap later model CPU chip to an older motherboard. It is best to purchase a motherboard with a matching CPU and RAM. What you should be looking at is the specification of the motherboard and the built-in devices on the motherboard that suits your computing requirements.
A motherboard for high performance gaming is different for one just for Internet and e-mail requirements. Then select one or more well known motherboard manufacturer and check their various models.
My preferences are Gigabyte, MSI, and Intel.

Oct 29, 2010 | PC Desktops

2 Answers

Motherboard model number


you can see on the motherboard.watch carefully...

Mar 09, 2010 | PC Desktops

1 Answer

I want to upgrade an Intel Pentium 4 631 3.o Ghz Processor to a P-4 661 3.4 on an Emachines t5084. I have seen a dozen types of P-4 661's how do i know which is correct for my Motherboard ? Most Processors...


You can use the intel processor compatibility tool here. You first need to take note of the motherboard's exact model number to find an exact match.

The model number is printed on a sticker on the board near RAM slots (typical, but may also be elsewhere).

As for the manual, the e-machines has the following information on this site. Drivers can be found here.

Dec 13, 2009 | E-Machines T5082 PC Desktop

1 Answer

Which intel motherboard ( model detatil) is suitable for an intel dual core 2.6 Ghz processor?also what should be the capacity of ram that may suitably mathe the intel dual core 2.6 Ghz processor?


Assuming the CPU you have is an E5300 2.6 duo 45nm then use an LGA 775 mobo.

For Win XP / Vista run at LEAST 2gb (Preferably 4GB) Ensure the mobo specs are compatible with the type of ram also.

Dec 03, 2009 | PC Desktops

2 Answers

851 MHz Celeron Processor


*********** board will support a max of 1GB of RAM. Your processor is an Intel at 1.8 GHz. The preceding is only true if your PC is the Emachines T1840 as you chose in the category listing of your post. Again if that is true, you can achieve the max RAM by installing a 512MB stick in each of the two memory slots.
Good luck.

PS: Gdlkn84as528 is correct in assuming that a less than 1.3GHz Intel processor would be a P3 or equivalent processor. So which is it, it can't be both ways?

Sep 18, 2009 | E-Machines -T1840-CELERON-1.8GHz,40GB...

1 Answer

Does it support or not???


It is true. Can you help me with the model number of your motherboard?

Mar 31, 2009 | Acer Aspire 2100 (91.AB675.D02) PC Desktop

1 Answer

Drivers


The name you have put here cannot be located, can either be D845glav or D845gvad2 under the intel site. Here is the link. Search site to see which one is your computer to download drivers.

http://downloadcenter.intel.com/NotFound.aspx?NoMatch=D845glvd2&lang=eng


Jul 29, 2008 | Fujitsu Siemens SCENIC P300 PC Desktop

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...