Question about Exercise & Fitness
Trimlint manual t-315
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: I HAVE A TRIMLINE
You will need to check the speed sensor for proper alignment, cleanliness and function. it should be located near the front roller or mounted on the motor. It should be within a credit cards width of the magnet or toothed wheel. If properly adjusted check with an a multi-meter to see if it is opening and closing by manually spinning the front roller or motor flywheel. If it isn't replace the sensor.
The sensor should open and close as the magnet passes by. As long as it is doing this it is good. If the sensor is ok, I would do the following:
# get a 12-18 volt dc battery fully charged(like one from a cordless drill)
# Make sure it is fully charged, because it won't work if not
# attach the + and - to the motor red is + and black is -
# If the motor turns slowly your motor is ok, if not the motor is bad and would need replaced
# if the motor is ok then your motor controller(the board with the metal) is malfunctioning and would need replaced.
Let me know,if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
Posted on May 17, 2011
Tips for a great answer:
Apr 07, 2018 | AT&T Lands Phones
May 08, 2017 | Exercise & Fitness
Dec 17, 2012 | Samsung CLP 315 Laser Printer
Aug 31, 2012 | Nautilus Nautillus, Trimline, Schwinn...
Jul 20, 2011 | ADC Kentrox SS-315 Home Equalizer
Mar 27, 2011 | Magellan GPS
33 people viewed this question
Usually answered in minutes!