- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1. Press the transfer button and enter 200
2. Enter password ** 1234** default.
3. Enter 1 to enable
4. Press SPK button and enter 505
5. Display will read
OLD: 1040703: 1125
For Monday April 7. time 1:00p.m
enter the following
104070313:00 and then press the Transfer button.
6. Display will return to normal..
Does this happen on all inbound calls or just some? If this is on all inbound calls...Sounds like Do not disturb is turned on. Most uniden's have a DND (do not disturb) mode. Try turning this off and see if that helps. Using Do Not Disturb
The Do Not Disturb or DND feature turns off the audio ringers of the base and all handsets at the same time. It does not affect any of the visual ringers.
With the phone in standby, press and hold
Do not Disturb on the base. The phone automatically turns on the answering system and shows Do Not Disturb in the display on all handsets.
To cancel, press Do not Disturb.
If this is not the issue, it may be turned on at the central office (your phone company) try using the DND activation/deactivation code of *64 from your phone. If this is just on some inbound calls...Then it you may have anonymous call rejection turned on. That feature blocks calls from people that block their calling number when placing calls.
hi, this is a feature which is in engineering programming, if you have access to this the MMC required is 501 the codes are 'Sys Hold' and 'Trans Hold', If you don't have access, you will need to contact your Telecoms maintainer. Alternatively you could use the exclusive hold, check out this site for more information - http://www.abbeytelecom.com
The do not disturb feature (DND) allows you to mute the ringer, the base, and any registered handsets at the same time. The phone must be in standby mode. Press and hold do not disturb on the base. You will hear a confirmation tone, and the DND LED illuminates. To cancel the DND feature, press do not disturb again. You can also mute the ringer tone while the phone is ringing by pressing do not disturb on the base. Activating the DND while the answering system is off will turn the answering system on automatically. The answering system setting will reset to the original setting when you cancel the DND. If you press answer on/off when the DND and the answering system is on, both of the DND and the answering system will turn off. To mute the ringer tone temporarily for each handset or the base, when the phone is ringing, press the MUTE soft key on the handset or the base. The ringer tone will return to the previous setting starting with the next incoming call.
You need to lengthen the "next port" Timing in MMC 601. 15-17 second should do it. I don't want to go into program access here as anyone could reprogram your system and possibly mess it up.. If you wanted to call me I could walk you thru it in under a minute. 909-496-5887
I've posted a really easy to follow Video for you on how to change the date and time on the SamsungProstar ( up to 70 more like this are available from abbeytel on youtube, all relating to issues on the Samsung Prostar) or go to http://www.abbeytelecom.com
The technician had to remove the memory module as the board tried to reset itself but the memory module was corrupted and would not allow the board to reset itself. The phone were reprogrammed and are working.