Question about RCA DIRECTV Satellite Remote Control

3 Answers

RCA direct TV remote

Need 4 digit code for emerson TV for remote from Direct TV RCA remote. Not sure of model of remote, there are numbers on back inside battery compartment

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 814 Answers

[http://voxrightnow.custhelp.com/cgi-bin/voxrightnow.cfg/php/enduser/std_adp.php?p_faqid=1769&p_created=1209688350&p_sid=6-sdxLAj&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9ODE4LDgxOCZwX3Byb2RzPTE1OCZwX2NhdHM9MCZwX3B2PTEuMTU4JnBfY3Y9JnBfc2VhcmNoX3R5cGU9YW5zd2Vycy5zZWFyY2hfbmwmcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1yY2Egc3lzdGVtIDUgcmVtb3RlIGNvbnRyb2w*&p_li=&p_topview=1] Please copy this web page link and paste it into the address bar of your web browser. This web link will take you to the RCA customersupport web page for programming universal remote controls and listscodes under system components. The television codes for the universalremote are listed under TV. This web page should be able to help yousolve your problems with the programming of the universal remotecontrol and give you the codes needed to use it with the components inyour system. Thank you for using Fix Ya and have a nice day.

Posted on Jun 19, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

The owners manual is http://66.77.167.109/rcaaccessories/docs/man/D770_DOC_OM.PDF

I was able to get some things to work, but too tired try any more. Good luck.

Posted on Jan 27, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Emerson has quite a few codes. Here they are:
1004
1006
1012
1023
1025
1029
1030
1033
1035
1036
1037
1038
1041
1042
1043
1046
1047
1049
1073
1123
1162
1171
1179
1191
1196
1208
I have the code book but don't know the commands. Can you help with that?

Posted on Jan 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a RCA remote model RCR804BFDR , and I have an Emerson tv. I can't find the code booklet directions, please help!


The Emerson TV codes are 1864, 0451, 0463, 0178, 0171, 1661, 1394, 1665, 1963 . To try these codes, press and hold Code Search until the LED comes on. Then press the TV button. Finally enter the four digit code. The manual is available here: http://voxrightnow.custhelp.com/app/answers/detail/a_id/15812/~/information,-owners-manual-and-code-list-for-the-rca-rcr804br-or-rcr804bfdr . The direct link to the manual is currently http://www.voxxintl.com/docs/common/RCR804BR/RCR804BR_OM.pdf .

I hope this helps.

Cindy Wells

Apr 30, 2016 | RCA Televison & Video

1 Answer

I have a rcr312w remote and can't program my emerson tv, can you help?


Hello
Setup codes to try with Emerson TV with RCA RCR 312W remote are:

10017, 10154, 10451, 10236, 10463,
10180, 10178, 10171, 11394, 11963
Load the remote with new batteries and proceed.

[1] Manually turn on the component you want the remote to
control

[2] Press and hold the component key (TV,

VCR•DVD, SAT•CBL) you wish to

program. The illuminated ON•OFF key

turns on and remains on. If you release

the component key at any time during the Direct Code

Entry procedure, the illuminated ON•OFF key blinks four
times, and the process is exited.

[3] While holding down the component key, consult the

Code Lists for the four-digit code that corresponds to your

component's brand and use the number keys (0-9) on the

keypad to enter it. While you are pressing the numbers, the
illuminated ON•OFF key turns off.

[4] After the fourth number is entered, the illuminated ON•OFF

key turns on. At this time, release the component key. If the

illuminated ON•OFF key turns off, you have entered a valid

code and have followed the correct procedure for Direct
Code Entry.

If you enter a code number that is not in the Code Lists or

you do not follow all of the steps for Direct Code Entry,

the illuminated ON•OFF key blinks four times when the

component key is released. This is an indication that a

programming error has occurred. In that case, repeat the

Direct Code Entry process from step 3.

Tip: Throughout the programming of each key, be sure to keep the

remote pointed at the IR sensor of the component you are currently
programming the remote to control.

[5] To confirm that the component key is programmed with

the correct code for maximum functionality, test the

component. Attempt to control a variety of the component's

functions with the remote. If some of the features of your

components do not work, try programming the remote with

a different code in the list until you find the code that allows

the remote to control the majority of your component's

functions. Different codes can provide different levels of
functionality.
OK.

Sep 03, 2011 | RCA Universal Remote Control

1 Answer

Need code & instructions for Emerson TV. I have universal remote


Hello
Codes for Emerson TV with "Direct TV - RC64 for web Univeral remote control are:

10154, 10236, 10463, 10180,

10178, 10171, 11963, 11944,

11929, 11928, 11911, 11394,

10623, 10282, 10280, 10270,

10185, 10183, 10182, 10181,

10179, 10177, 10158, 10039,
10038, 10019
You haven't specified the model number of remote control you possess; that is why I send this remote controls codes.
[1] Locate the 5-digit code for your DIRECTV® Receiver
[2] Power on the DIRECTV Receiver
[3] Slide the MODE switch to the DIRECTV position

[4] Press and hold the MUTE and SELECT keys until the

green light under the DIRECTV position flashes twice,
then release both keys

[5] Using the number keys, enter the 5-digit code. If

performed correctly, the green light under the
DIRECTV position flashes twice

[6] Aim the remote at your DIRECTV Receiver and press

the PWR key once. The DIRECTV Receiver should

turnoff; if it does not, repeat steps 3 and 4, trying each
code for your brand until you find the correct code
OK.

Jul 02, 2011 | Emerson Televison & Video

2 Answers

The small black rca universal remote lost code book and need a code for a emerson tv


Hello
There are so may RCA model remote controls with black colour. If you send the model number of your RCA remote control I will try to send the codes for Emerson. Its model number will be either on its front or back cover, or inside the battery stop lid. Anyway I hereby give you some universal remote control codes for RCA with Emerson TV. Just try them.

011, 026, 027, 028, 029, 030, 031, 032, 037, 042, 053, 064, 065, 067, 075, 076, 079
Four digit universal remote codes for RCA are:
0031 0004 0048 0054 0094 0100 0102 0107 0129 0191 0005 0009 0000 0162 0163 0342 0003 0015 0022 0096 0113 0125 0179 0187 0188
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand

Jun 23, 2011 | Televison & Video

1 Answer

I have direct tv and can not get the right code to program the tv its a emerson model number LC320EM825 I had the same problem with comcast any help


Have you tried all the Emerson codes in this document?

http://support.radioshack.com/support_video/doc67/67859.pdf

Oct 12, 2010 | RCA RCU300 Remote Control

4 Answers

Direct tv codes wont work for my emerson tv


code for emerson plasma hdtv is 10812. for direct tv remote.

Dec 02, 2008 | Televison & Video

1 Answer

RCA DIRECT TV UNIVERSAL REMOTE CODE FOR SONY TV


If you have the RCR450 remote, the manual is here =>

http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/rca/rcr450-manual.zip&area=other

The codes for Sony TV are 1002, 1218 listed in the back of the manual.

Nov 08, 2008 | RCA RCR450 Remote Control

1 Answer

RCA Universal Remote RCR4258


ive got the same problem.
Did you ever solve it

Sep 04, 2008 | RCA Universal Remote Control

10 Answers

Emerson Jumbo Universal Remote won't program Direct TV receiver.


panasonic t.v. codes are

003, 054, 055, 062, 070, 148, 170, 171

Direct t.v. codes are

200, 201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 214, 215, 216, 217

Jan 08, 2008 | Televison & Video

Not finding what you are looking for?
RCA DIRECTV Satellite Remote Control Logo

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71754 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2294 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...